A brief note on Apparatus and Titrations: the apparatus for time, temperature, mass and volume, the words of solutions, fair tests, and the method and calculation of an acid-base titration. With a worked example, practice, a program and questions to check yourself.
Volume of a liquid: measuring cylinder (quick, rough), volumetric pipette (one fixed volume, exact), burette (any volume, read as a difference).
Volume of a gas: gas syringe.
Read a scale to the nearest half division. The largest error is half a division, and it is a smaller percentage of a larger reading.
Methods and fair tests
Name one advantage and one disadvantage of a method. Example: a gas syringe loses no gas, while an upturned cylinder over water loses the gas that dissolves.
The independent variable is what you change. The dependent variable is what you measure. Control variables stay the same.
Repeat readings, take the mean, and look for anomalous results.
The words of solutions
Solvent: dissolves the solute. Solute: is dissolved. Solution: solute dissolved in solvent.
Saturated solution: the maximum concentration of solute at a stated temperature.
Residue: what remains after evaporation, distillation or filtration. Filtrate: the liquid that passes through the filter.
Acid-base titration
A burette holds the solution of known concentration. A volumetric pipette puts a fixed volume in a conical flask with a suitable indicator.
The end-point is where the indicator just changes colour and stays changed. Methyl orange: red in acid, yellow in alkali. Thymolphthalein: colourless in acid, blue in alkali.
Do a rough titration, then repeat until two titres agree within 0.20cm3. Use the mean of those.
Extended: moles =c×1000V. Use the equation ratio. Concentration =Vin dm3moles.
A worked example
25.0cm3 of sodium hydroxide needs 18.80cm3 of 0.100mol/dm3 hydrochloric acid. Find the concentration of the alkali.
The acid.0.100×100018.80=0.00188mol.
The alkali. The ratio is 1 : 1, so 0.00188mol of NaOH.
The concentration.0.02500.00188=0.0752mol/dm3.
Practice with new numbers
A program to try
The program finds the concentration of an alkali from a titration.
Mistakes to avoid
Using a measuring cylinder when the volume must be exact. Use a pipette or a burette.
Reading the top of the surface. Read the bottom of the curve.
Putting the rough titre in the mean. Leave it out.
Forgetting the 1000. Change cm³ to dm³ before you use a concentration.
Forgetting the ratio. Read it from the equation.
Check yourself
Which apparatus puts exactly 25.0cm3 of alkali into a flask?
What do we call the liquid that passes through a filter paper?
What colour is thymolphthalein in alkali, and in acid?
Sources
Cambridge IGCSE Chemistry 0620 syllabus for 2026 to 2028, sections 12.1, 12.2 and 3.3.