Thermal expansion · Physics Class 9–10 | StemPy Lab
Course 10.2·Lesson 1 of 3
Thermal expansion
Solids, liquids and gases all get bigger when they are heated, and smaller when they are cooled. Particles move further apart on average, and they do not get bigger themselves. A gas expands the most, a liquid less, and a solid the least. Engineers must allow for it.
about 30 min1 simulation2 practice questions
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Why do railway lines have gaps?
Look at a railway line and you may see small gaps between the rails. A big bridge has gaps in the road too, covered with toothed metal plates. Why would anyone leave a gap in a bridge? On a hot day the rails and the road get longer. Without a gap, they would push on each other, bend and break. This is thermal expansion.
Most materials expand (get bigger) when their temperature rises. They contract (get smaller) when their temperature falls. Solids, liquids and gases all do this. For a gas we mean the volume at a constant pressure.
The particle explanation
When a solid is heated, its particles vibrate with more energy. Each particle swings out further and pushes its neighbours away a little. On average, the particles end up slightly further apart. The whole solid becomes a little bigger.
Be careful. The particles themselves do not get bigger. The spaces between them do.
Solids, liquids and gases compared
Is the amount of expansion the same for all three states? No. Here are typical values for 1000cm3 of each, heated by 100∘C.
Material
Increase in volume
A steel block (solid)
3.6cm3
Mercury (liquid)
18cm3
Air at a constant pressure (gas)
about 341cm3
A bar chart with a logarithmic vertical axis. It shows the increase in volume of 1000 cubic centimetres of three materials heated by 100 degrees Celsius. The bar for a steel block is short, at 3.6 cubic centimetres. The bar for mercury is taller, at 18 cubic centimetres. The bar for air at constant pressure is much taller, at about 341 cubic centimetres. The gas expands most and the solid least.
The liquid expands about 5 times as much as the solid. The gas expands about 95 times as much as the solid. So the order is: gases expand most, then liquids, then solids.
Extended: the order follows from the forces and the motion of the particles. In a solid, strong forces hold the particles close together, so even a big increase in vibration separates them by very little. In a liquid, the forces are weaker, so the same energy separates them more. In a gas the forces are almost nothing and the particles move freely. The gas fills any space that its pressure allows, so it expands a great deal.
Raise the temperature and watch the growth. Then double the length of the bar. The growth doubles, because it is in proportion to the length. You do not need to calculate it in an exam. The simulation shows how large the effect is.
Uses and problems of expansion
Gaps in bridges, roads and railway lines. The gaps let the material expand without damage.
Overhead cables. Power cables are hung slack in summer, so they do not snap when they contract in winter.
The liquid-in-glass thermometer. The liquid in the bulb expands and rises up the narrow tube. A bigger rise in temperature gives a longer thread.
A tight lid. A metal lid stuck on a glass jar is run under hot water. The metal lid expands more than the glass, so it loosens.
Cracked glass. Hot water poured into a cold thick glass heats the inside first. The inside expands and the outside does not, and the glass may crack.
A bimetallic strip. Two different metals are joined in one strip. Brass expands more than iron for the same rise in temperature. When the strip is heated, the brass side gets longer and the strip bends, with the brass on the outside of the curve. The strip bends the other way when it cools below its starting temperature. It is used as a switch in a thermostat (a device that keeps a temperature steady) and in a fire alarm.
Three pictures of a bimetallic strip made of brass bonded to iron, drawn side by side. On the left the strip is cold and straight. In the middle it is warm and bends in a curve with the brass on the outside of the curve and the iron on the inside, because brass expands more than iron. On the right it is cooler than at the start and bends the opposite way, with the brass on the inside.
A worked example
A steel rail is 25.0 m long. One metre of steel grows by 1.2 mm when its temperature rises by 100∘C. How much does the rail grow when the temperature rises by 50∘C?
What we know. The growth is in proportion to the length and to the rise in temperature.
The growth.1.2mm/m×25.0m×100∘C50∘C=15.0mm.
The meaning. The rail grows by about 1.5 cm. Without a gap of at least this size, the rails would press on each other.
Practise with new numbers
Try it in Python
The program finds how much a bar of each of four materials grows when the temperature rises. It uses the growth of one metre for a rise of 100∘C.
Common mistakes
Writing that the particles get bigger. They do not. They move apart.
Thinking all materials expand by the same amount. Different materials expand by different amounts. Gases expand much more than liquids, and liquids more than solids.
Forgetting that expansion is small. A steel rail grows by millimetres. This is why we need gaps and not a large space.
Mixing up which side of a bimetallic strip is longer. The metal that expands more is on the outside of the curve.
Remember these
Solids, liquids and gases expand when heated and contract when cooled. For a gas, the pressure must stay constant.
The particles move further apart. They do not get bigger.
Gases expand the most, liquids less, solids the least. Extended: the forces between the particles explain the order.
Uses and problems: gaps in bridges and rails, overhead cables, thermometers, loosening a lid, cracked glass, the bimetallic strip.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Why do engineers leave small gaps between the sections of a long bridge?
A glass rod is 12 m long. One metre of the glass grows by 0.9 mm when the temperature rises by 100∘C. How much does the rod grow when the temperature rises by 30∘C?
Put solids, liquids and gases in order, with the one that expands most first. Extended: give a reason.
A bimetallic strip has brass on one side and iron on the other. Brass expands more than iron. The strip is heated. Which metal is on the outside of the curve?
References
Cambridge IGCSE Physics 0625 syllabus, section 2.2.1: thermal expansion of solids, liquids and gases.
OpenStax, College Physics 2e, Chapter 13 (Temperature, Kinetic Theory, and the Gas Laws): thermal expansion of solids and liquids.
Enroll free in Expansion, Heat Capacity and Changes of State
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Count the course towards the certificate for its chapter.