Internal energy and specific heat capacity · Physics… | StemPy Lab
Course 10.2·Lesson 2 of 3
Internal energy and specific heat capacity
A bigger temperature rise needs more energy, and so does a bigger mass. Different materials need different amounts. The specific heat capacity of a material is the energy needed to warm 1 kg of it by 1 degree Celsius. An electric heater lets us measure it.
about 30 min1 simulation2 practice questions
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Why does the sea stay cool when the sand is hot?
On a sunny beach the sand burns your feet, and the sea water is cool. Both get the same energy from the Sun. The sea warms much more slowly. Water needs a lot of energy to warm up. Sand needs much less. This lesson measures that difference with a number.
Internal energy
A hot object is not the same as a cold one. The particles of the hot object have more energy. The total energy of all the particles in an object is called its internal energy. When we raise the temperature of an object, we increase its internal energy.
Extended: an increase in temperature means an increase in the average kinetic energy of all the particles in the object.
Specific heat capacity
Heating a bigger mass by the same temperature needs more energy. Heating by a bigger rise needs more energy. The material matters too. The specific heat capacity, c, of a material is the energy needed to raise the temperature of 1kg of it by 1∘C.
Extended: we define it, and use it, as
c=mΔθΔE
Here ΔE is the energy transferred in joule (J), m is the mass in kg and Δθ (the Greek letter delta and theta) is the change in temperature in degrees Celsius. The unit of c is J/(kg °C). A change of 1∘C is the same as a change of 1K.
If we want the energy, then ΔE=mcΔθ.
Material
Specific heat capacity, c (J/(kg °C))
Water
4200
Aluminium
900
Iron
450
Copper
390
Water has a very large specific heat capacity, so it takes a lot of energy to warm it and it releases a lot when it cools. This is why water is used in hot water bottles and in central heating.
Compare water and copper with the same mass and power. Which one warms up faster? Copper does. Its c is smaller, so the same energy raises its temperature more.
A worked example. How much energy is needed to warm 2.0 kg of water from 15∘C to 65∘C?
The change in temperature.Δθ=65−15=50∘C.
The energy.ΔE=mcΔθ=2.0kg×4200J/(kg °C)×50∘C=420000J=420kJ.
A second example. A copper block of mass 0.40 kg takes in 7800 J, and its temperature rises by 50∘C. We want c, so c=mΔθΔE=0.40kg×50∘C7800J=390J/(kg °C).
Measuring c by experiment
Extended: this is how we measure the specific heat capacity of a solid. A metal block of known mass has two holes. An electric heater goes into one, and a thermometer into the other. A little oil in the holes helps the heat to pass. The block stands in thick insulation.
A diagram of an experiment to measure the specific heat capacity of a metal block. A metal block stands inside a layer of thick insulation. Two holes in the block hold an electric heater and a thermometer. The heater is connected to a power supply with an ammeter in series and a voltmeter across the heater.
Measure the massm of the block with a balance.
Switch on the heater and start a stopwatch. Read the voltage V and the current I. The power is P=VI.
Read the temperature at regular times, and note the rise.
Find the energy.ΔE=Pt=VIt.
Findc from c=mΔθΔE.
For a liquid, use an insulated beaker (a polystyrene cup works) with a stirrer, an immersion heater and a thermometer. Stir all the time so that the whole liquid is at one temperature. The steps are the same.
A worked example. A heater of 12 V and 4.0 A warms a block of aluminium of mass 1.0 kg for 5 minutes. The temperature rises by 16∘C.
The power.P=VI=12V×4.0A=48W.
The energy.ΔE=Pt=48W×300s=14400J.
The specific heat capacity.c=1.0kg×16∘C14400J=900J/(kg °C).
Sources of error. Some of the energy from the heater is lost to the air. The thermometer then shows a smaller rise than there would be without any loss, so the value of c that we calculate is too large. We reduce the error by wrapping the block in thick insulation, by putting a lid on the liquid, by stirring it and by taking the readings over a short time.
Practise with new numbers
Try it in Python
The program finds the energy to warm 1.0 kg of four materials by 20∘C. Then it gives the same energy to water and to copper and compares the rises in temperature.
Common mistakes
Forgetting the mass. The energy is in proportion to the mass, to c and to the rise in temperature.
Using the final temperature in place of the rise. Use Δθ, the final temperature minus the starting temperature.
Mixing joules and kilojoules. The specific heat capacity is in J, not kJ. Divide by 1000 at the end if kilojoules are needed.
Thinking that loss of heat makes the measured c too small. The block gains less energy than the heater supplies, so the rise is smaller and the calculated c is too large.
Remember these
The internal energy of an object rises when its temperature rises.
Extended: a rise in temperature is a rise in the average kinetic energy of all the particles.
Extended:c=mΔθΔE and ΔE=mcΔθ. The unit of c is J/(kg °C).
Extended: to measure c, use ΔE=VIt from an electric heater, the mass and the rise in temperature. Insulate to reduce the loss.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
What happens to the internal energy of a block when its temperature rises?
Extended. How much energy is needed to warm 0.25 kg of water by 40∘C? The specific heat capacity of water is 4200J/(kg °C).
Extended. A block of mass 0.50 kg takes in 9000 J, and its temperature rises by 20∘C. What is its specific heat capacity?
Extended. Why is the value of c from a heater experiment usually too large?
References
Cambridge IGCSE Physics 0625 syllabus, section 2.2.2: specific heat capacity.
OpenStax, College Physics 2e, Chapter 14 (Heat and Heat Transfer Methods): temperature change and heat capacity.
Enroll free in Expansion, Heat Capacity and Changes of State
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Count the course towards the certificate for its chapter.