The Lorentz transformation changes an event (x,t) in a frame S into (x′,t′)
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
One rule for every event
In the last course we found three effects: moving clocks run slow, moving rods are short, and simultaneity depends on the frame. Each came from a special set-up, a light clock or a lamp in a carriage. Can one rule give them all? It can. It replaces Galileo's rule.
Let a frame S' move at the speed v along the x axis of a frame S. Let their origins meet at t=t′=0. An event at (x,t) in S is at (x′,t′) in S', with
x′=γ(x−vt)
t′=γ(t−c2vx)
and y′=y, z′=z. This is the Lorentz transformation, and γ=1/1−v2/c2 as before.
Where it comes from, in outline
We need a rule that is linear, so that steady motion stays steady. It must become Galileo's rule when v is small. And a light pulse from the origin, x=ct in S, must also be x′=ct′ in S', by the second postulate. Try x′=γ(x−vt) and, by the first postulate, the same form back again, x=γ(x′+vt′). Put x=ct and x′=ct′ into both. Then ct′=γ(c−v)t and ct=γ(c+v)t′. Multiply the two:
c2=γ2(c2−v2)
So γ=1/1−v2/c2. Solving for t′ then gives the second line of the transformation.
A neater form with ct
Physicists often measure time in metres: ct is the distance light goes in the time t. With β=v/c the transformation looks the same for both coordinates:
x′=γ(x−βct)
ct′=γ(ct−βx)
To go back from S' to S, change the sign of v:
x=γ(x′+βct′)
ct=γ(ct′+βx′)
The transformation also works for differences between two events: Δx′=γ(Δx−vΔt) and Δt′=γ(Δt−vΔx/c2).
Worked example: one event in two frames
In S, an event happens at x=1500m and t=4.0μs. The frame S' moves at 0.6c. Find x′ and t′.
Time in metres.ct=3.00×108m/s×4.0×10−6s=1200m.
The factor. At 0.6c, γ=1.25.
The position.x′=1.25×(1500m−0.6×1200m), so x′=975m.
The time.ct′=1.25×(1200m−0.6×1500m)=375m, so t′=1.25μs.
Check. Go back with the inverse: x=1.25×(975m+0.6×375m)=1500m. It fits.
A spacetime diagram with x in metres across, from 0 to 2000, and c t in metres up, from 0 to 2000. A dashed orange line at 45 degrees through the origin is the path of a light pulse. Two blue lines through the origin are the axes of a frame moving at 0.6 c: the c t prime axis leans to the right of the vertical axis, and the x prime axis rises above the horizontal axis, each by the same angle of 31 degrees, so both lean towards the light line. A red point E sits at x equal to 1500 metres and c t equal to 1200 metres. Thin dashed red lines from E run parallel to the two blue axes and meet them, to show how the coordinates x prime and c t prime are read.
The three effects again
Time dilation. A clock at rest at x′=0 ticks twice, Δt′ apart. Use the inverse form with Δx′=0: Δt=γΔt′.
Length contraction. A rod at rest in S' has Δx′=L0. In S we mark its ends at the same time, Δt=0. Then L0=γΔx, so Δx=L0/γ.
Simultaneity. Two events at the same time in S, Δt=0, are Δt′=−γvΔx/c2 apart in S'. The event further along +x happens first in S'.
At low speeds γ≈1 and vx/c2 is tiny, so the transformation becomes Galileo's rule. Newton's mechanics is the slow-speed edge of relativity.
Put the event on the blue ct′ axis. Then x′=0: the event happens at the origin of S'. Now put it on the blue x′ axis. Which readout becomes zero?
Practise with new numbers
Try it in Python
The program changes three events from S to S' and back again, and checks that it gets the events it started with.
Common mistakes
Forgetting the vx/c2 term. It is the term that makes simultaneity depend on the frame.
Using the wrong sign for the inverse. Going back from S' to S, v becomes −v.
Mixing t and ct. Write both coordinates in the same unit, or keep c in every term.
Using it for frames that do not share an origin. The formulas assume the origins meet at t=t′=0. Otherwise use differences between events.
Changing y and z. Only x and t change for motion along x.
Remember these
x′=γ(x−vt) and t′=γ(t−vx/c2), with y′=y and z′=z.
In ct: x′=γ(x−βct) and ct′=γ(ct−βx).
The inverse has +v in place of −v.
The same rules hold for Δx and Δt between two events.
Time dilation, length contraction and simultaneity are all inside it.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
An event has x=0 and t=2.0μs in S. What is t′ in a frame moving at 0.8c?
Two events happen at the same place and the same time in S. Are they at the same place and time in every frame?
What does the Lorentz transformation become when v is much less than c?
Why must a light pulse with x=ct in S also have x′=ct′ in S'?
References
OpenStax University Physics Volume 3, Chapter 5 Relativity, section on the Lorentz transformation.
Taylor and Wheeler, Spacetime Physics (second edition, 1992), on the Lorentz transformation.
Enroll free in Lorentz Transformations and Spacetime
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.