Two methods can often measure the same thing, and neither is perfect. This lesson weighs up methods and apparatus, shows how to plan a fair test, and defines the words solvent, solute, solution, saturated, residue and filtrate.
about 30 min1 simulation2 practice questions
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Advantages and disadvantages of a method
Suppose you want to measure how much carbon dioxide marble chips make with dilute hydrochloric acid. You can choose between three methods.
A gas syringe. Advantage: you read the gas volume straight from the scale, and no gas is lost. Disadvantage: the plunger can stick, and the joints must be gas-tight.
An upturned measuring cylinder full of water. Advantage: it is cheap and simple. Disadvantage: some carbon dioxide dissolves in the water, so the volume you read is too small.
A balance. The flask loses mass as the gas escapes. Advantage: you collect no gas. Disadvantage: the mass lost is small, so the balance reading has a large percentage error.
There is never a perfect method. Name one advantage and one disadvantage, and say which one matters most for the job.
Other pairs follow the same idea. A burette is exact but slow and breakable. A measuring cylinder is quick but rougher. A stop-watch is easy to use, but a person starts and stops it a little late, so a short time has a large percentage error.
Planning a fair test
A fair test changes one thing and keeps the rest the same.
The independent variable is the one thing you change.
The dependent variable is what you measure to see the effect.
The control variables are the things you keep the same, so that only the independent variable can cause a change.
Example. You test how the temperature of the water affects how much sugar dissolves. The independent variable is the temperature. The dependent variable is the mass of sugar that dissolves. The control variables are the volume of water, the way you stir, and the size of the sugar crystals.
Take enough readings, with the values of the independent variable spread evenly. Repeat each one, and use the mean. Look for a result that does not fit the pattern, an anomalous result, and repeat it.
The words of solutions
Learn these six definitions exactly.
A solvent is a substance that dissolves a solute.
A solute is a substance that is dissolved in a solvent.
A solution is a mixture of one or more solutes dissolved in a solvent.
A saturated solution is a solution containing the maximum concentration of a solute dissolved in the solvent at a specified temperature.
A residue is a substance that remains after evaporation, distillation, filtration or any similar process.
A filtrate is a liquid or solution that has passed through a filter.
Example. Stir a mixture of sand and salt into water. The salt dissolves: salt is the solute, water is the solvent, and salt water is the solution. Pour it through filter paper. The sand stays behind as the residue. The salt solution that passes through is the filtrate. Heat the filtrate until the water has gone. The salt that remains is also a residue, this time of evaporation.
A solution is saturated only at a stated temperature. More of most solids dissolves in hot water, so a solution that is saturated at 25∘C is not saturated at a higher temperature.
Once the solution is saturated, the concentration stops rising. Extra solid becomes residue.
Practise with new numbers
Try it in Python
The program uses the invented solid X to find the residue and the concentration of the filtrate.
Common mistakes
Calling the salt the solvent. The solvent is the liquid that does the dissolving, usually water.
Saying the residue is only the solid from filtering. A residue is whatever remains after evaporation, distillation or filtration.
Writing saturated without a temperature. The maximum concentration depends on the temperature.
Mixing up the filtrate and the residue. The filtrate passes through the filter. The residue stays on it.
Changing two things at once. Then you cannot tell which one caused the change.
Remember these
Advantage and disadvantage: name one of each for the method, then decide which matters more.
Independent variable: what you change. Dependent variable: what you measure. Control variables: what you keep the same.
Solvent dissolves the solute. Solution is solute in solvent.
Saturated: the maximum concentration at a stated temperature.
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Sugar is stirred into hot tea. Name the solute and the solvent.
Why is the gas syringe better than an upturned cylinder for a gas that dissolves in water?
A student tests how the concentration of acid affects the time for a piece of magnesium to dissolve. Name the independent variable and the dependent variable.
Copper(II) sulfate crystals are stirred into water and the mixture is filtered. Some crystals stay on the paper. What are the solid and the liquid called?
A solid dissolves up to 30g in 100cm3 of water at 20∘C. A student stirs in 45g. What is the mass of the residue?
References
Cambridge IGCSE Chemistry 0620 syllabus for 2026 to 2028, section 12.1 (Experimental design), Core 2 and 3.
OpenStax, Chemistry 2e, Chapter 11 (Solutions and Colloids), for dissolving and saturated solutions.
Enroll free in Experimental Design and Acid-Base Titrations
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.