Electrolysis of molten compounds · Chemistry Class 9–10 | StemPy Lab
Course 10.1·Lesson 2 of 3
Electrolysis of molten compounds
Solid lead(II) bromide does nothing in a circuit. Melt it and the bulb lights, grey metal drips from one rod and brown fumes rise from the other. We find out what forms in a molten compound, why, and how to write the half-equations.
about 30 min1 simulation2 practice questions
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Why the compound must be molten
A solid ionic compound has its ions locked in place, so it does not conduct. To electrolyse it without water, we heat it until it melts. Then the ions can move. Lead(II) bromide melts at about 370∘C, so we heat it in a crucible, in a fume cupboard, because bromine is poisonous.
Electrolysis of molten lead(II) bromide
Lead(II) bromide, PbBr2, contains Pb2+ ions and Br− ions. Two graphite rods dip into the molten compound. When the current passes, you see:
At the cathode (negative): a silvery-grey liquid, which is molten lead. It sinks to the bottom of the crucible.
At the anode (positive): red-brown fumes of bromine.
A drawing of a crucible of molten lead(II) bromide heated from below, with two graphite rods connected to a power supply and a bulb. Red-brown bromine vapour rises around the positive rod, the anode. A pool of silvery liquid lead lies at the bottom, under the negative rod, the cathode. The half-equation at the cathode is Pb2+ plus 2e- gives Pb. At the anode it is 2Br- gives Br2 plus 2e-.
The lead ions move to the cathode. Each one gains two electrons and becomes a lead atom. The bromide ions move to the anode. Each one loses one electron, and two bromine atoms join to make a bromine molecule.
The compound has been decomposed into its two elements. This is why electrolysis can split compounds that heat alone cannot split.
Predicting the products of a molten binary compound
A binary compound has just two elements. The rule is the same for all of them:
The metal forms at the cathode.
The non-metal forms at the anode.
Lead(II) bromide, PbBr2: lead at the cathode and bromine, red-brown fumes, at the anode.
Sodium chloride, NaCl: sodium at the cathode and chlorine, a pale green-yellow gas, at the anode.
Potassium iodide, KI: potassium at the cathode and iodine, purple vapour, at the anode.
Zinc chloride, ZnCl2: zinc at the cathode and chlorine at the anode.
Aluminium oxide, Al2O3: aluminium at the cathode and oxygen at the anode.
You do not need to learn the table. Read the formula, find the metal and the non-metal, and use the rule. For aluminium oxide, which is the ore of the aluminium industry, the compound has to be dissolved in molten cryolite, because aluminium oxide melts at over 2000∘C. The extraction of metals chapter returns to this.
Extended: half-equations
A half-equation shows what happens at one electrode. It has the particle that arrives, the particle that forms and the electrons. In a half-equation, the atoms and the charges must both balance.
At the cathode, the positive ions gain electrons (reduction):
Pb2++2e−→PbNa++e−→NaAl3++3e−→Al
At the anode, the negative ions lose electrons (oxidation). Non-metals such as bromine form molecules with two atoms, so we write two ions:
2Br−→Br2+2e−2Cl−→Cl2+2e−2O2−→O2+4e−
Check the charge on each side. In Pb2++2e−→Pb, the left side has +2−2=0, and the right side has 0. It balances. In 2Br−→Br2+2e−, the left side has −2 and the right side has 0−2=−2. It balances.
The number of electrons lost at the anode must equal the number gained at the cathode. For aluminium oxide the numbers are 3 and 4, so we scale to the lowest common multiple, 12. Four aluminium ions gain 12 electrons, and six oxide ions lose 12 electrons:
4Al3++12e−→4Al6O2−→3O2+12e−
Add them and the electrons cancel. The overall equation is 2Al2O3→4Al+3O2.
A mole of electrons makes a mole of sodium, half a mole of magnesium and a third of a mole of aluminium. More charge on the ion means more electrons for each atom of metal.
Practise with new numbers
Try it in Python
The program lists the products of several molten compounds with the rule: metal at the cathode and non-metal at the anode.
Common mistakes
Giving hydrogen as a product of a molten compound. There is no water, so there is no hydrogen. Only the ions of the compound take part.
Writing a half-equation with only one bromide ion. Bromine is Br2, so write 2Br−.
Forgetting the charge. The lead ion is Pb2+ and it needs 2 electrons. Check that the charge balances.
Putting the electrons on the wrong side. Electrons are on the left at the cathode (gained) and on the right at the anode (lost).
Writing the electrodes the wrong way round. Metals form at the cathode. Non-metals form at the anode.
Remember these
A compound must be molten or dissolved so that the ions are free to move.
Molten binary compound: metal at the cathode, non-metal at the anode.
Molten lead(II) bromide: silvery-grey liquid lead at the cathode and red-brown bromine fumes at the anode.