Conductors, electrolytes and electrolysis · Chemistry… | StemPy Lab
Course 10.1·Lesson 1 of 3
Conductors, electrolytes and electrolysis
Connect a bulb to a battery through a beaker of salt solution and it lights. Use sugar solution and it does not. This lesson explains the difference, and then names the parts of an electrolytic cell and follows the charge through it.
about 30 min1 simulation2 practice questions
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Which substances let a current through?
You can test any substance with a simple circuit: a battery, a bulb and two rods (the electrodes) that dip into the substance. If the bulb lights, the substance conducts. Here is what you find:
Substance
State
Bulb
Copper
solid
lights
Graphite
solid
lights
Sodium chloride
solid
does not light
Sodium chloride
molten
lights
Sodium chloride
dissolved in water
lights
Sugar
dissolved in water
does not light
Ethanol
liquid
does not light
A current is a flow of charged particles. A substance conducts only if it has charged particles that are free to move.
Metals and graphite have free electrons. They conduct as solids and as liquids. The electrons carry the charge.
Solid ionic compounds have ions, but the ions are held in fixed places in the lattice. They cannot move, so the solid does not conduct.
Molten or dissolved ionic compounds have ions that are free to move. They conduct. The ions carry the charge.
Simple molecular substances such as sugar and ethanol have neutral molecules. There are no free charges, so they do not conduct.
An ionic compound does not need the current to make its ions. The ions are already there in the solid. Melting or dissolving only sets them free.
Electrolysis
An electrolyte is a molten or dissolved ionic compound that conducts and is split up by the current. Electrolysis is the decomposition of an ionic compound, when it is molten or in aqueous solution, by the passage of an electric current.
Look at the cell in the picture. These are the parts:
The power supply (a battery or a power pack) pushes the current round the circuit.
The electrodes are the two rods that dip into the electrolyte. The anode is the positive electrode. The cathode is the negative electrode. A way to remember: Positive Anode, Negative Is Cathode (PANIC).
The electrolyte is the molten or dissolved substance that is split up.
Electrodes are often inert. This means that they do not react and do not take part. Graphite (carbon) and platinum are the usual inert electrodes.
A drawing of an electrolytic cell. A battery sits at the top. A wire from its positive terminal goes to the right-hand electrode, the anode, and a wire from its negative terminal goes to the left-hand electrode, the cathode. Both rods stand in a beaker of electrolyte. Blue arrows on the wires show electrons leaving the anode, passing through the battery and arriving at the cathode. Inside the beaker, positive ions are shown moving towards the cathode and negative ions towards the anode. The electrolyte carries no electrons.
Positive ions are called cations and negative ions are called anions. Opposite charges attract, so the cations move to the negative cathode and the anions move to the positive anode. At each electrode a product forms.
At the cathode (negative) the product is a metal or hydrogen.
At the anode (positive) the product is a non-metal other than hydrogen, such as chlorine or oxygen.
Extended: how the charge moves
Extended candidates must describe the transfer of charge in three places.
In the external circuit (the wires and the power supply), electrons move. They leave the anode, pass through the power supply and arrive at the cathode. Electrons move from the anode to the cathode through the wires.
At the electrodes, electrons are lost and gained. At the cathode, positive ions gain electrons. At the anode, negative ions lose electrons.
In the electrolyte, ions move. Cations go to the cathode and anions go to the anode. No electrons travel through the electrolyte.
The current is complete because the ions carry the charge across the electrolyte, and the electrons carry it round the wires. At each electrode the charge changes carrier. At the cathode an ion takes an electron from the wire. At the anode an ion gives an electron to the wire.
A helpful memory aid is OIL RIG: Oxidation Is Loss of electrons, Reduction Is Gain of electrons. So the anode is where oxidation happens, and the cathode is where reduction happens. You will use this idea again in the lesson on redox.
The lines show how the amount of each product grows with the electrons that pass. The same number of moles of lead and of bromine form, because each formula unit PbBr2 gives one lead ion and two bromide ions.
Practise with new numbers
Try it in Python
The program decides whether each substance conducts, with the rules above.
Common mistakes
Saying that solid sodium chloride conducts. The ions are there, but they cannot move. Only the molten or dissolved compound conducts.
Saying that the current makes the ions. The ions are already in the compound. The current only moves them.
Sending electrons through the electrolyte. Electrons travel in the wires. Ions travel in the electrolyte.
Mixing up the electrodes. The anode is positive and the cathode is negative. Positive ions go to the cathode.
Calling graphite a metal. Graphite is a form of carbon. It conducts because it has free electrons, so it is used for inert electrodes.
Remember these
A substance conducts if it has free charged particles: electrons in metals and graphite, ions in molten or dissolved ionic compounds.
Electrolysis is the decomposition of a molten or dissolved ionic compound by an electric current.
The anode is positive, the cathode is negative, and the electrolyte is the substance that is split up.
Metals or hydrogen form at the cathode. Non-metals other than hydrogen form at the anode.
Extended: electrons move through the wires from the anode to the cathode. Ions move through the electrolyte. Electrons are lost at the anode and gained at the cathode.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Why does solid sodium chloride not conduct, but molten sodium chloride does?
Name the electrode that is positive, and say which ions move towards it.
Why is sugar solution a non-electrolyte?
Extended: in which direction do electrons move in the wires of an electrolytic cell?
0.40 mol of electrons pass through molten lead(II) bromide. What mass of lead forms? Ar of lead is 207.
References
Cambridge IGCSE Chemistry 0620 syllabus for 2026 to 2028, section 4.1 (Electrolysis), Core 1 and 2 and Supplement 8.