Carbon takes the oxygen out of iron oxide, but not out of aluminium oxide. Silver oxide loses its oxygen on gentle heating, and copper oxide does not. The Gibbs energy decides all of this. This lesson shows how to use it for the reduction of an oxide, and how to couple two reactions.
about 25 min1 simulation1 practice question
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
A question of Gibbs energy
Think of a ball on a hill. It rolls down by itself and never up. A chemical change at constant temperature and pressure also has a downhill direction. The quantity that falls is the Gibbs energy, G. A change can go by itself when
ΔG<0
The standard Gibbs energy change comes from the enthalpy and entropy changes:
ΔG∘=ΔH∘−TΔS∘
ΔG∘ is linked to the equilibrium constant by
ΔG∘=−RTlnK
So a large negative ΔG∘ means a large K, and the products win.
Forming and breaking an oxide
To compare oxides fairly, metallurgists write every formation reaction for one mole of oxygen gas:
34Al+O2→32Al2O32Fe+O2→2FeO
For a solid metal and a solid oxide, a gas is used up. The entropy falls, so ΔS∘ is negative, and ΔG∘ becomes less negative as T rises. Hot oxides are less stable.
If ΔG∘ of formation becomes positive at some temperature, the oxide breaks up on heating alone. For silver oxide, from standard data at 298 K,
4Ag+O2→2Ag2O:ΔG∘=−62+0.133TkJ
with T in kelvin. This is zero at T=0.13362=466K. Above that, silver oxide decomposes to silver and oxygen at 1 bar. Mercury(II) oxide also breaks up on heating, which is how Priestley made oxygen. Most oxides need far higher temperatures, often more than any furnace reaches.
The oxygen pressure over an oxide
When both the metal and the oxide are pure solids, only the oxygen appears in K. For the formation reaction, K=pO21 with the pressure in bar. So at equilibrium
pO2=eΔG∘/RT
This is the decomposition pressure of the oxide. If the oxygen pressure around it is higher, the metal is oxidised. If it is lower, the oxide gives up oxygen. Air has pO2=0.21bar. So an oxide breaks up in air when ΔG∘>RTln0.21.
Choose silver oxide and move T upward from 400 K. The blue line crosses the dashed line a little before it crosses zero. Then choose copper(I) oxide. Its line stays far below both, so copper keeps its oxide in air at every temperature shown.
Coupling: making an uphill change go
Most oxides have a large negative ΔG∘ of formation. Breaking them is uphill. We drive the change by joining it to a reaction that goes steeply downhill: the burning of a reducing agent. For iron(II) oxide and carbon, at 1400 K,
2FeO→2Fe+O2ΔG∘=+351kJ
2C+O2→2COΔG∘=−472kJ
Add them. The oxygen cancels:
2FeO+2C→2Fe+2COΔG∘=−121kJ
The sum is negative, so carbon can reduce iron(II) oxide at 1400 K. In general, per mole of oxygen gas,
ΔGreduction∘=ΔG∘(reducer line)−ΔG∘(oxide line)
A reducing agent works when its own oxide is more stable than the oxide we want to break.
Practise with new numbers
Try it in Python
The program finds the Gibbs energy change and the oxygen pressure for three reactions at one temperature, and the temperature where each line reaches zero.
Common mistakes
Comparing lines written for different amounts of oxygen. Always use one mole of oxygen gas.
Forgetting that ΔS∘ is in J/K and ΔH∘ in kJ. Divide ΔS∘ by 1000 first.
Reading a negative ΔG∘ as a fast reaction. Thermodynamics says whether a change can go, not how fast.
Subtracting the lines the wrong way round. Reduction by X: X line minus oxide line.
Remember these
ΔG∘=ΔH∘−TΔS∘, and ΔG∘=−RTlnK.
Lines are written per mole of oxygen gas. Solid metal to solid oxide: ΔS∘<0, the line rises.
Decomposition pressure: pO2=eΔG∘/RT.
Coupling: reduction goes when the reducer's line is below the oxide's line.
References
NCERT Chemistry Part I for Class 12 (2007 edition), Unit 6, the section on thermodynamic principles of metallurgy.
OpenStax Chemistry 2e, Chapter 16, sections 16.4 and 16.5 on free energy and its link to the equilibrium constant.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Why does the Gibbs energy of formation of most oxides become less negative as the temperature rises?
For a reaction, ΔG∘=0 at some temperature. What is K there?
At 1700 K, the oxide line of a metal is at −300kJ and the carbon line at −525kJ. Can carbon reduce the oxide?
What does coupling mean in metallurgy?
Enroll free in Thermodynamics of Extraction: Ellingham Diagrams and Reduction
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.