Course 36.2Lesson 2 of 3
Nylon ropes, polyester shirts and plastic switch covers are condensation polymers. This lesson shows how amide and ester links form with loss of water, how to find the monomers from a repeat unit, and how the phenol and methanal resins set into networks.
Try the code and the simulations beside the lesson.
Think of a chain of paper clips. To join two clips, you hook an end of one into an end of the other. Monomers for condensation polymers work like clips with a hook at each end. Each monomer has two reactive groups, one at each end. When two groups meet, they form a link and a small molecule, usually water, is set free.
Because water leaves at each link, the repeat unit has fewer atoms than the monomers. For one diamine and one diacid, two water molecules leave for each repeat unit.
Hexane-1,6-diamine, , and hexanedioic acid (adipic acid), , are heated together under pressure at about 553 K.
and is released.
The numbers 6,6 count the carbon atoms in the diamine and in the diacid. The repeat unit, , has a molar mass of . Hydrogen bonds between the and groups of neighbouring chains make nylon 6,6 a strong fibre: sheets, bristles for brushes, and the textile industry.
Caprolactam, a seven-membered ring with an amide group, , is heated with a little water at about 533 K. The ring opens and the units join:
Only one number appears, because only one monomer, with six carbon atoms, is used. Nylon 6 makes tyre cords, fabrics and ropes. The Indian syllabus places it with the condensation polymers. In fact no water is lost overall, since the ring opens; the A-Level course calls it a polyamide made by ring opening.
Ethane-1,2-diol, , and benzene-1,4-dicarboxylic acid (terephthalic acid), , are heated at 420 to 460 K with a catalyst of zinc acetate and antimony(III) oxide.
The repeat unit, , has a molar mass of . Its chemical name is poly(ethylene terephthalate), PET, and the Indian syllabus calls the fibre terylene. It makes crease-resistant fabrics, often blended with cotton or wool, and drinks bottles.
Glyptal is a polyester of benzene-1,2-dicarboxylic acid (phthalic acid) with ethane-1,2-diol. It is used in paints and lacquers. Some books make it from glycerol (propane-1,2,3-triol) instead; with three alcohol groups the chains cross-link into a hard resin.
Bakelite. Phenol and methanal react with an acid or a base catalyst. First, methanal adds at the 2 or 4 position of the ring and gives 2-hydroxymethylphenol and 4-hydroxymethylphenol. These join through bridges, with loss of water, into linear chains called novolac, which is used in paints. Heated with more methanal, the chains are bridged at a third position of each ring. A rigid network forms: Bakelite. It is a thermoset used for combs, electrical switches and the handles of pans.
Melamine-formaldehyde resin. Melamine, , a ring with three amine groups, joins with methanal into a network. It is hard and does not break easily, so it is used for crockery.
Urea-formaldehyde resin forms in the same way from urea and methanal. It is used for unbreakable cups and laminated sheets.
An ester or amide link can be hydrolysed by hot acid or alkali, which is the reverse of the condensation. Hot aqueous sodium hydroxide turns PET back into ethane-1,2-diol and the sodium salt of the acid. Hot hydrochloric acid turns nylon 6,6 into hexanedioic acid and the hexane-1,6-diammonium ion. This is why polyesters and polyamides can be recycled chemically, while addition polymers cannot.
Set the diamine to 0.5 mol and move the diacid. The nylon line rises until the diacid reaches 0.5 mol, then it stops. The monomer in short supply sets how much polymer forms.
The program finds the repeat unit mass of a condensation polymer from its two monomers and the water lost.
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Every lesson is open to read. Enrolling also lets you:
Log in to join the discussion.
Loading…
This lesson is free to read. Enroll free to keep your place and take the tests.