Course 36.2Lesson 1 of 3
Polythene bags, PVC pipes, non-stick pans and acrylic jumpers are all addition polymers. This lesson gives the monomer, the repeat unit, the way of making and the main uses of each, and shows why some of them burn to an acid gas.
Try the code and the simulations beside the lesson.
Look around a kitchen. The bin liner is polythene. The water pipe under the sink may be PVC. The frying pan has a coat of PTFE. The foam box that held the eggs is polystyrene, and the warm jumper on the chair may be acrylic, which is PAN. Every one of them is an addition polymer. Each comes from a monomer with a double bond.
To write the repeat unit of an addition polymer, open the double bond and draw a bond out of each end:
The group X stays on every second carbon atom. To go back from a repeat unit to the monomer, put the double bond between the two carbon atoms of the main chain.
| Polymer | Monomer |
|---|---|
| Polythene | ethene |
| Polypropene | propene |
| PVC | chloroethene |
| Polystyrene | styrene |
| PTFE | tetrafluoroethene |
| PAN | acrylonitrile |
Polythene. Ethene gives two products, as we saw in the first course. Low density polythene comes from the free-radical chain at high pressure. High density polythene comes from a Ziegler-Natta catalyst at low pressure.
Polypropene. Propene, , is joined on a Ziegler-Natta catalyst. Its isotactic form is a hard, strong plastic for ropes, crates and carpet fibres.
Poly(vinyl chloride), PVC. Chloroethene (vinyl chloride), , is joined by a free-radical chain. The chlorine atoms make the chains polar and stiff. Pure PVC is hard: it is used for pipes and window frames. A plasticiser, a liquid of small molecules that sits between the chains, makes it soft for raincoats, handbags and the insulation of cables. PVC holds chlorine by mass. When it burns, the chlorine leaves as hydrogen chloride, an acid gas. So waste PVC must not be burnt in the open.
Polystyrene. Styrene, , gives a clear, brittle plastic. Blown with a gas while it sets, it becomes the light foam of packing boxes and the insulation of cold boxes.
Poly(tetrafluoroethene), PTFE. Tetrafluoroethene, , is joined by a free-radical chain under pressure, with a persulphate catalyst. The bond is very strong, and the fluorine atoms wrap the carbon chain. So PTFE resists acids, alkalis and heat, and almost nothing sticks to it: non-stick pans, gaskets and seals.
Polyacrylonitrile, PAN. Acrylonitrile, , is joined with a peroxide catalyst. The polar nitrile groups hold the chains together, so PAN is spun into a soft fibre that is used in place of wool.
Poly(methyl methacrylate), PMMA. This clear, hard plastic replaces glass in lenses and signs. It is in the A-Level and IB lists of addition polymers, but not in the Indian syllabus.
Addition polymers are made of strong chains with no group that water or microbes can attack. So they do not rot. Burning destroys them, but every carbon atom gives carbon dioxide. PVC also gives hydrogen chloride, and PAN gives oxides of nitrogen and some hydrogen cyanide.
Choose polystyrene and 2 kg. It gives the most carbon dioxide for each kilogram, because it is carbon by mass. Now choose PVC. The red line rises: every repeat unit sends one HCl into the air.
The program reads a monomer as a count of atoms, finds the molar mass of the repeat unit and the mass percentage of each element.
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Every lesson is open to read. Enrolling also lets you:
Log in to join the discussion.
Loading…
This lesson is free to read. Enroll free to keep your place and take the tests.