Iron is in clay, in soil and in many rocks. Yet iron is made from haematite and not from clay. Why? This lesson explains minerals, ores and gangue, lists the common ores of aluminium, iron, copper and zinc, and sets out the steps that take an ore to a pure metal.
about 25 min1 simulation1 practice question
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Metals in the crust
Look at a garden spade, a copper wire and a drink can. Each metal came out of a rock. Only a few metals, such as gold and platinum, are found free as the element. They are called native metals. Most metals are found joined to other elements, as oxides, sulphides, carbonates, silicates and halides. Aluminium is the most common metal in the crust of the Earth, and iron comes second.
A mineral is a natural compound of a fixed composition, found in the crust. An ore is a mineral from which a metal can be extracted with profit. So every ore is a mineral, but not every mineral is an ore.
Clay holds aluminium and some iron. Yet nobody makes aluminium from clay, because getting the metal out costs too much. Bauxite gives aluminium cheaply, so bauxite is the ore.
The earth and rock that come out of the mine along with the ore are the gangue. Sand, clay and silica are typical gangue. Most of the work of metallurgy is getting rid of it.
The common ores
Metal
Ores
Aluminium
bauxite, kaolinite
Iron
haematite, magnetite
Iron
siderite, iron pyrites
Copper
copper pyrites, malachite
Copper
cuprite, copper glance
Zinc
zinc blende, calamine
Zinc
zincite
The formulas are worth learning, because the formula decides how the ore is treated.
Bauxite:AlOx(OH)3-2x with 0<x<1, a hydrated oxide. Kaolinite, a clay: [Al2(OH)4Si2O5].
Haematite:Fe2O3. Magnetite:Fe3O4. Siderite:FeCO3. Iron pyrites:FeS2.
Zinc blende, also called sphalerite: ZnS. Calamine:ZnCO3. Zincite:ZnO.
Two notes for readers of other books. Iron pyrites is not used as an ore of iron. It has too much sulphur, and it is used to make sulphuric acid instead. In American books the name calamine is used for a zinc silicate, and ZnCO3 is called smithsonite.
From ore to metal
A flow chart of the steps of metallurgy from top to bottom. Ore from the mine. Then concentration, with four methods named beside it: hydraulic washing, magnetic separation, froth flotation and leaching. Then conversion to the oxide, by calcination for a carbonate or a hydrated oxide and by roasting for a sulphide. Then reduction of the oxide, by carbon, carbon monoxide, a more reactive metal or electrolysis, which gives the crude metal. Last, refining gives the pure metal.
Every extraction follows the same plan.
Concentration. Remove most of the gangue. The ore becomes richer in the mineral.
Conversion to the oxide. A carbonate or a hydrated oxide is heated alone (calcination). A sulphide is heated in air (roasting).
Reduction. Take the oxygen away with carbon, carbon monoxide, a more reactive metal or electrolysis. This gives the crude metal.
Refining. Purify the crude metal.
Why convert to the oxide first? Oxides are easier to reduce than sulphides or carbonates, as the next course shows.
How much metal is in a mineral?
A chemist judges an ore first by its numbers. The mass fraction of a metal in a mineral is
w=Mmmetal
Here mmetal is the mass of the metal in one formula unit, in g/mol, and M is the molar mass of the mineral.
For haematite, w=1602×56=0.700, so 70.0 % of the mineral is iron. An ore is only partly mineral, so the metal in a tonne of ore is the mineral share times this fraction.
Choose copper pyrites and 60 %. A tonne of this ore holds about 208 kg of copper at best. Real copper ores are much poorer, often under 1 % copper, which is why concentration matters so much.
Practise with new numbers
Try it in Python
The program finds the share of metal in four minerals and the metal in one tonne of an ore.
Common mistakes
Calling every mineral an ore. An ore must give the metal at a profit.
Using one copper atom for malachite.CuCO3⋅Cu(OH)2 has two.
Taking the metal fraction of the mineral as the metal fraction of the ore. Multiply by the share of the mineral first.
Listing iron pyrites as the ore of iron. It is a mineral of iron, used for its sulphur.
Remember these
Mineral: natural compound. Ore: a mineral that gives a metal at a profit. Gangue: the unwanted rock.