Course 40.1Lesson 1 of 3
A drop of soup on a gas stove makes a bright yellow flash. That yellow is the same light a chemist uses to find sodium in a salt. This lesson shows how a flame test is done, which colour each metal gives, and why: an excited electron falls back and gives out light of one energy.
Try the code and the simulations beside the lesson.
Have you seen salty water boil over onto a gas flame? The blue flame turns yellow at once. The salt holds sodium, and sodium colours a flame yellow. Many metal ions give a flame its own colour. This is the flame test, the quickest test for some cations.
Why the acid? It turns the salt into a chloride. Metal chlorides turn to vapour easily in a flame, so the colour is bright. A wooden splint soaked in the solution also works. The splint must not catch fire, or its own yellow light hides the colour.
| Metal ion | Flame colour |
|---|---|
| lithium | crimson red |
| sodium | golden yellow |
| potassium | lilac |
| calcium | brick red |
| strontium | crimson red |
| barium | apple green |
| copper(II) | blue green |
Books use slightly different words. Indian texts say brick red for calcium and apple green or grassy green for barium. A-Level and IGCSE texts say orange red for calcium and light green for barium. These are the same colours.
The flame is hot. It gives energy to the atoms of the metal, and an electron moves up to a higher energy level. We call this an excited atom. The electron soon falls back. It gives out the energy as one photon, a small packet of light.
The energy of the photon is the gap between the two levels:
Here is the Planck constant, is the speed of light, (the Greek letter nu) is the frequency and (lambda) is the wavelength.
Each element has its own set of levels. So each element gives light of its own wavelengths. Sodium gives two lines very close together, at 589.0 nm and 589.6 nm. They look yellow. Let us find the energy of one photon at 589 nm. First multiply the two constants:
Then divide by the wavelength in metres:
This gives . For a mole of photons we multiply by and get . A useful short cut is , which gives .
Move the slider to 671 nm, the red line of lithium, and to 766 nm, the red line of potassium. Red light carries less energy than yellow light. Violet light carries the most.
A hot solid, such as the filament of an old bulb, gives every colour. A flame with a metal salt gives a few bright lines. Seen through a spectroscope, a prism or grating that spreads light out, these lines form a line spectrum. The positions of the lines identify the element, even when two flames look alike. Lithium and strontium both give red flames, but their lines sit at different wavelengths.
Calcium, strontium and barium give bands as well as lines. Part of their colour comes from small molecules in the flame, such as CaOH. So their colours are less pure than the yellow of sodium.
Sodium is everywhere: in dust, in sweat, on glass. A trace of it gives a strong yellow that hides a weak colour such as the lilac of potassium. So we look at a potassium flame through blue cobalt glass. The glass absorbs the yellow light of sodium and lets the red and violet light of potassium through. The flame then looks pink or crimson.
Magnesium and beryllium ions give no colour. Their electrons are held more tightly, so the energy gaps are larger. The light they give out lies in the ultraviolet, which we cannot see. Ions such as zinc and aluminium also give no useful colour.
The program finds the energy of the main flame lines of three metals.
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Every lesson is open to read. Enrolling also lets you:
Log in to join the discussion.
Loading…
This lesson is free to read. Enroll free to keep your place and take the tests.