Course 40.1Lesson 3 of 3
When a tablet fizzes in water, a gas is leaving. A chemist can name that gas with a splint, a strip of litmus or a drop of limewater. This lesson sets out the confirming tests for the common anions and gases, and the traps where two ions give the same first sign.
Try the code and the simulations beside the lesson.
A test is useful when only one ion gives the result. Many first signs are shared. Carbonate and sulphite both fizz with acid. Sulphate and carbonate both give a white solid with barium ions. So each test has a step that removes the look-alike.
Carbonate, . Add dilute hydrochloric acid. The mixture fizzes. The gas turns limewater milky.
Sulphate, . Acidify with dilute hydrochloric or nitric acid, then add barium chloride or barium nitrate. A white precipitate of forms. It does not dissolve in the acid. The acid is added first to destroy carbonate and sulphite, whose barium salts would also be white.
Sulphite, . Barium ions give a white precipitate that dissolves in dilute hydrochloric acid. Warm the sulphite with dilute acid. Sulphur dioxide comes off and turns acidified potassium dichromate(VI) from orange to green.
Halides. Acidify with dilute nitric acid, then add silver nitrate. Chloride gives a white precipitate, bromide a cream one and iodide a yellow one. Then add ammonia.
| Precipitate | Colour | In ammonia |
|---|---|---|
| white | dissolves, dilute | |
| cream | dissolves, concentrated | |
| yellow | does not dissolve |
Why the difference? Ammonia binds silver ions as . Silver chloride gives enough silver ions to the solution for this to pull it apart. Silver iodide has a far smaller solubility product, so even concentrated ammonia cannot dissolve it. Why nitric acid and not hydrochloric acid? Hydrochloric acid would add chloride ions of its own.
Nitrate, . Add aqueous sodium hydroxide and a piece of aluminium foil or Devarda's alloy, and warm. Ammonia comes off and turns damp red litmus blue:
An ammonium salt gives ammonia with sodium hydroxide alone. So warm with sodium hydroxide first, until no more ammonia comes off. Only then add the aluminium. Indian books also give the brown ring test for nitrate.
Nitrite, . Dilute acid gives brown fumes of nitrogen dioxide above the solution. Nitrite also decolourises acidified potassium manganate(VII).
| Gas | Test | Result |
|---|---|---|
| lighted splint | squeaky pop | |
| glowing splint | relights | |
| limewater | turns milky | |
| damp red litmus | turns blue | |
| damp litmus | bleached | |
| acidified dichromate | orange to green | |
| ammonia gas | white smoke |
Two more are worth knowing. Water vapour turns white anhydrous copper(II) sulphate blue. Hydrogen sulphide turns lead(II) acetate paper black.
Carbon dioxide turns limewater milky because calcium carbonate forms: . Too much carbon dioxide makes it clear again, as soluble calcium hydrogencarbonate forms. Sulphur dioxide also turns limewater milky, as calcium sulphite. So limewater cannot tell the two gases apart. Use the dichromate test for sulphur dioxide.
At room conditions one mole of any gas fills about . A-Level and IGCSE use this value. Indian books use at 273 K and 1 atm, and IUPAC gives at 273 K and 1 bar. Always use the value a question gives.
Try each halide at the same mass. Sodium chloride gives the most precipitate for each gram, because its molar mass is the smallest.
The program plans the tests for an unknown anion and gives the mass of precipitate to expect.
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Every lesson is open to read. Enrolling also lets you:
Log in to join the discussion.
Loading…
This lesson is free to read. Enroll free to keep your place and take the tests.