Course 40.2Lesson 3 of 3
Two students titrate the same acid and get 22.40 cm³ and 22.45 cm³. Is that a real difference? Every reading has a limit to how well it can be made. This lesson shows how to read a burette, choose concordant titres, put a size on the uncertainty of a result, and tell a random error from a systematic one.
Try the code and the simulations beside the lesson.
The first titration is a rough titration, done fast to find the end point roughly. Then repeat with care, adding the last few drops one at a time. Titres that agree within 0.10 cm³ are concordant. The mean of the concordant titres is the value we use. Leave out the rough titre and any titre that does not agree.
Take titres of 24.60 (rough), 24.15, 24.40, 24.20 and 24.10 cm³. The concordant ones are 24.15, 24.20 and 24.10 cm³, and their mean is 24.15 cm³.
Every instrument has an uncertainty, the range within which the true value is likely to lie. Typical values are:
| Apparatus | Uncertainty |
|---|---|
| burette, one reading | |
| 25.00 cm³ pipette | |
| 250.0 cm³ flask | |
| balance to 0.001 g | a reading |
A titre is the difference of two burette readings, so its uncertainty is . A mass found by weighing a boat, adding the solid and weighing again also uses two readings.
The percentage uncertainty compares the uncertainty with the value:
A titre of 22.40 cm³ has . A titre of 8.50 cm³ has 1.18 %. Small titres have large percentage uncertainties. That is why a titration is planned to give a titre between about 20 and 30 cm³.
A concentration found as is a product and a quotient, so we add the percentage uncertainties of , and . A-Level and IB add them this way. Research laboratories often combine them as the square root of the sum of the squares, which gives a smaller total. Use the method your syllabus asks for.
Slide the titre down to 10 cm³. The burette now gives twice the uncertainty of a 20 cm³ titre.
A random error scatters results on both sides of the mean, such as a small misjudgement of the end point. Repeats and a mean reduce it. A systematic error pushes every result the same way, such as a burette not rinsed with the titrant, or an indicator that changes colour too late. Repeats do not remove it.
How do we spot a systematic error? Find the percentage error:
Here is the measured value minus the accepted value.
If the percentage error is larger than the total percentage uncertainty, the uncertainties of the apparatus cannot explain it. Something systematic is wrong.
Give a result to the number of significant figures of the least precise data. A titre of 22.40 cm³ and a concentration of 0.100 mol/dm³ give an answer to 3 significant figures.
The program picks the concordant titres, finds their mean, and adds the percentage uncertainties.
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Every lesson is open to read. Enrolling also lets you:
Log in to join the discussion.
Loading…
This lesson is free to read. Enroll free to keep your place and take the tests.