Course 10.3Lesson 1 of 3
A metal spoon in hot soup soon becomes hot at the handle. A wooden spoon does not. Thermal energy passes along a solid from the hot part to the cold part by conduction. Metals conduct best because they have free electrons. Liquids and gases conduct badly.
This lesson is free to read. Enroll free to keep your place in the course.
Try the code and the simulations beside the lesson.
Leave a metal spoon and a wooden spoon in a cup of hot tea. After a minute, the metal handle is hot and the wooden handle is still comfortable. Both spoons are in the same tea. Metal moves thermal energy along itself quickly, and wood does not. This movement is called conduction.
Conduction is the transfer of thermal energy through a material, from a hot place to a cold place, with no movement of the material as a whole.
Experiment 1: rods of different materials. Take rods of equal length and thickness: copper, iron, brass, glass. Stick a drawing pin to each rod with a dab of wax, at equal distances from one end. Heat the other ends together in the same flame. As the energy passes along a rod, the wax melts and the pin falls.
The pin that falls first shows the best conductor. In the picture, the copper rod conducts best and the glass rod worst. To make the test fair, keep the length, the thickness and the heating the same for every rod. The only thing that changes is the material.
Experiment 2: is water a good conductor? Put a piece of ice at the bottom of a boiling tube, held down with wire gauze. Fill the tube with cold water. Tilt the tube and heat the top with a flame.
The water at the top boils, but the ice at the bottom does not melt. Water is a very poor conductor, so very little energy reaches the ice.
Experiment 3: insulation. Put hot water in identical beakers. Wrap each with a different material, leave one bare, and measure the temperature of each after the same time. The beaker with the smallest fall in temperature has the best insulation around it.
Extended: in every solid, the particles vibrate. Heat one end, and the particles there vibrate with more energy. They shake their neighbours through the forces between them. These neighbours shake the next ones. The vibrations spread through the lattice (the regular pattern of particles), and so does the energy. This works in all solids, and it is slow.
Extended: in a metal there is another way. A metal has free electrons, also called delocalised electrons. These are electrons that are not fixed to one atom and can move through the whole metal. In the hot region the free electrons gain kinetic energy and move faster. They move through the metal and collide with other particles. They carry energy to the cold region much more quickly than lattice vibrations alone. This is why metals are such good conductors.
Extended: liquids and gases are bad conductors. In a gas the particles are far apart, so collisions are rare. Energy passes slowly from one particle to another. In most liquids the particles touch, but they are not held in a lattice, so energy is also passed on slowly. A liquid metal such as mercury is the exception, because of its free electrons.
Extended: many solids are in between. Glass, brick and stone conduct better than wood or plastic, but much less well than metals.
Air is a very poor conductor, so materials that trap air make good insulators: wool, fur, feathers and foam. A thick coat keeps you warm because of the air trapped in the cloth, not because the cloth makes heat.
Choose brick and then still air. Compare the energy that passes through each second. Then double the thickness of the brick. The energy halves.
A worked example. Here is what the extra formula gives for a slab of area and thickness cm with between its two sides:
The number is the thermal conductivity of the material, and the values here are typical. It comes again in the Class 11-12 chapter on thermal properties of matter. A good insulator passes far less energy than glass. You do not need the formula in an exam. It shows why thick layers of trapped air work.
The program uses the extra formula to find how much energy passes each second through a slab of five different materials.
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Every lesson is open to read. Enrolling also lets you:
Log in to join the discussion.
Loading…