The principle of moments and equilibrium · Physics… | StemPy Lab
Course 13.2·Lesson 2 of 3
The principle of moments and equilibrium
A see-saw balances when the two children make equal and opposite moments. This lesson states the principle of moments, uses it to find an unknown force or distance, and describes the experiment that tests it. It also says what equilibrium means.
about 30 min1 simulation2 practice questions1 Python program5 questions to check yourself
This lesson is free to read. Enroll free to keep your place in the course.
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
A see-saw that balances
A heavy child and a light child sit on a see-saw. The heavy child sits close to the pivot, and the light child sits far from it. The see-saw can balance. The bigger force has the shorter distance, and the smaller force has the longer distance.
The principle of moments
When an object is balanced, the total clockwise moment about a pivot equals the total anticlockwise moment about the same pivot. This is the principle of moments:
sum of clockwise moments=sum of anticlockwise moments
A see-saw: a horizontal beam balanced on a triangular pivot at its middle. A blue arrow of 40 newtons pushes down on the left at 1.5 metres from the pivot. A red arrow of 60 newtons pushes down on the right at 1.0 metre from the pivot. The labels say that the anticlockwise moment is 40 times 1.5, which is 60 newton metres, and that the clockwise moment is 60 times 1.0, which is also 60 newton metres.
In the picture, the weight on the left is 40 N, at 1.5 m from the pivot. It turns the beam anticlockwise with a moment of 40×1.5=60N m. The weight on the right is 60 N, at 1.0 m. It turns the beam clockwise with 60×1.0=60N m. The two moments are equal, so the beam balances.
One force each side. We can use the principle to find a force or a distance that we do not know.
A worked example. A weight of 50 N hangs 0.60 m to the left of the pivot of a light beam. What weight, 0.40 m to the right of the pivot, balances it?
The moments are equal.F1d1=F2d2.
We want F2.F2=d2F1d1=0.4050×0.60=75N.
The check. The distance on the right is smaller, so the weight must be bigger. It is.
Equilibrium
An object is in equilibrium when there is no resultant force and no resultant moment on it. A balanced beam on a pivot is in equilibrium. The pivot pushes up on the beam with a force that is equal to the total weight pressing down. Then the forces cancel, as well as the moments.
Set the forces to 40 N and 60 N, and the distances to 1.5 m and 1.0 m. The beam is level. Now double the force on the left. Which way does the beam tip?
Extended: more than one force on a side
The principle of moments also holds when there are several forces on each side. Add up the moments of all the forces that turn one way, and add up the moments of all the forces that turn the other way. The two totals are equal when the beam is balanced.
A worked example. A light beam is on a pivot. On the left a force of 80 N is 0.9 m from the pivot. On the right a force of 30 N is 1.2 m from the pivot, and one of 18 N is 2.0 m from it.
Anticlockwise.80×0.9=72N m.
Clockwise.30×1.2+18×2.0=36+36=72N m.
The result. The two are equal, so the beam balances.
The pivot. There is no resultant force, so the pivot pushes up with 80+30+18=128N.
Extended: an experiment to test the principle
Balance a metre rule on a pivot at its middle, the 50.0 cm mark. Then the weight of the rule has no moment. Hang weights on both sides, and move them until the rule is level again.
Measure each weight, and its distance from the pivot, to the nearest millimetre.
Work out each moment, force × distance.
Add the moments on each side and compare them.
Here are two trials with the distances in cm and the weights in N:
Trial 1. Left: 1.2 N at 25.0 cm, moment 30.0 N cm. Right: 1.5 N at 20.0 cm, moment 30.0 N cm.
Trial 2. Left: 0.9 N at 30.0 cm, moment 27.0 N cm. Right: 1.8 N at 15.0 cm, moment 27.0 N cm.
In each trial the two moments agree. In a real experiment they agree within the errors of measurement. This shows that there is no resultant moment on an object in equilibrium.
Practise with new numbers
Try it in Python
The program adds up the moments on each side of a pivot, says whether the beam balances, and finds the force from the pivot.
Common mistakes
Adding the forces instead of the moments. The principle is about moments.
Using the distance from the end of the beam. Use the distance from the pivot.
Mixing up the sides. A load on the left turns the beam anticlockwise, and a load on the right turns it clockwise.
Forgetting the force from the pivot. In equilibrium it is equal to the total downward force.
Forgetting the weight of the beam. A uniform beam has its weight at its middle. If the pivot is not at the middle, the weight has a moment.
Remember these
Principle of moments: for a balanced object, the clockwise moments equal the anticlockwise moments about the same pivot.
Equilibrium: no resultant force and no resultant moment.
Extended: the principle holds for any number of forces on each side. The pivot supplies the upward force.
Extended: to test it, balance a metre rule at its middle, hang weights, and compare F×d on both sides.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A force of 90 N acts 0.40 m from the pivot on one side of a balanced beam. A force on the other side is 0.60 m from the pivot. What is it?
What two conditions must be true for an object to be in equilibrium?
Extended. A light beam carries 24 N at 0.50 m and 16 N at 0.20 m on the left of the pivot. A force of 40 N is on the right. How far from the pivot must it be to balance the beam? What is the force from the pivot?
In the metre rule experiment, why is the rule balanced at its middle before the weights are hung?
References
Cambridge IGCSE Physics 0625 syllabus, section 1.5.2: outcomes 3 to 6, the principle of moments and equilibrium.
OpenStax, College Physics 2e, Chapter 9 (Statics and Torque): conditions for equilibrium.
Enroll free in Moments and Centre of Gravity
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Count the course towards the certificate for its chapter.