Identifying radiation and its behaviour in fields ·… | StemPy Lab
Course 11.2·Lesson 3 of 3
Identifying radiation and its behaviour in fields
Absorbers let us tell which kinds of radiation a source gives out. Extended: in an electric field alpha and beta particles bend in opposite directions and gamma radiation does not bend. A magnetic field bends them in opposite directions too. Alpha particles ionise the most because of their large kinetic energy and charge.
about 30 min1 simulation1 practice question
Lesson 3 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Who is in the beam?
Suppose someone hands you a source in a sealed box and asks which radiations it gives out. You cannot open it. But you can do an experiment, and the first part of this lesson is the Core method. The second and third parts are Extended content.
Identifying the radiation with absorbers
The method uses the pattern from the last lesson. Measure the corrected count rate with different absorbers in front of the tube.
No absorber. The count rate is due to alpha, beta and gamma radiation together.
A sheet of paper. If the count rate falls, the source gives out alpha radiation. Paper stops only alpha.
A few millimetres of aluminium. A further fall shows beta radiation.
Thick lead. A last fall shows gamma radiation, which is reduced but not stopped completely.
What is left after the lead is only the background. The tube is kept a few centimetres from the source, so most alpha particles are stopped by the air anyway.
A worked example. The corrected count rate is 200 counts/min with no absorber and 200 counts/min behind paper. It is 60 counts/min behind 3 mm of aluminium. Find the count rate due to each kind of radiation, if the lead removes the rest.
Alpha. The paper changed nothing, so 200−200=0. There is no alpha radiation.
Beta. The aluminium removed 200−60=140 counts/min, so the beta count rate is 140 counts/min.
Gamma. The rest, 60 counts/min, is the gamma radiation.
Check.0+140+60=200 counts/min, the count rate with no absorber.
Extended: deflection in an electric field
Alpha and beta particles are charged, so an electric field pushes on them. Gamma radiation has no charge and is not deflected.
A diagram of three kinds of radiation passing between two horizontal charged plates. The top plate is marked negative and the bottom plate is marked positive. A source at the left sends all three along the middle. The red alpha path bends slightly upwards towards the negative plate. The purple gamma path stays straight. The green beta path bends strongly downwards towards the positive plate. A note says not to scale, and the alpha path bends much less than the beta path.
A positive alpha particle is pulled towards the negative plate.
A negative beta particle is pulled towards the positive plate. It bends the opposite way to alpha.
Gamma radiation goes straight on.
The beta path bends much more than the alpha path. A beta particle has a charge of only −1, but its mass is about 1/7000 of the mass of an alpha particle. A light particle is moved sideways much more easily.
Here the beta and alpha particles travel at the same speed. The alpha line is almost flat. In real experiments beta particles often move much faster than alpha particles, but the beta path still bends more.
Extended: deflection in a magnetic field
A moving charge is also pushed by a magnetic field. The force is at right angles to the field and to the motion. Fleming's left-hand rule gives its direction. Hold the first finger along the field and the second finger along the conventional current, which is the direction in which a positive charge moves. The thumb then points along the force.
A diagram of three kinds of radiation entering a region of magnetic field that points into the page, drawn as a grid of crosses. The source is on the left and the particles move to the right. The red alpha path curves gently upwards. The green beta path curves more sharply downwards. The purple gamma path stays straight. A note says not to scale.
In the picture the field points into the page and the particles move to the right.
A positive alpha particle moves to the right like a conventional current. The force is upwards.
A negative beta particle moving right is a current to the left. The force is downwards, the opposite way.
Gamma radiation is not deflected.
The beta path is the more strongly curved, again because the beta particle is far lighter.
Extended: why alpha is the most ionising
An ionisation takes energy from the radiation. Two things make a radiation more ionising.
Charge. A particle with a bigger charge pulls harder on the electrons of the atoms it passes. Alpha has +2, beta has −1 and gamma has no charge, so gamma ionises very rarely.
Kinetic energy. Alpha particles from a source typically have more kinetic energy than beta particles. The energy pays for many ionisations. An alpha particle makes ions all along its path. It uses up its energy in a few centimetres of air, so it makes many ions in a short distance.
So alpha is the most ionising, beta is less so, and gamma is the least.
Practise with new numbers
Try it in Python
The program takes the count rates with the different absorbers and works out how much of each radiation the source gives out.
Common mistakes
Thinking alpha and beta bend the same way. They have opposite charges, so they bend in opposite directions.
Saying that alpha bends more because it has a bigger charge. Beta bends more because it is so much lighter.
Saying that gamma is slightly deflected. It has no charge, so it is not deflected at all.
Forgetting that the second finger of the left-hand rule is the conventional current. For a negative particle that is opposite to its motion.
Remember these
Paper removes alpha, a few millimetres of aluminium removes beta, and thick lead reduces gamma.
Extended: alpha and beta bend in opposite directions in electric and magnetic fields, beta more. Gamma is not deflected.
Extended: alpha ionises most because of its large charge and kinetic energy.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A source gives a corrected count rate of 90 counts/min. It is still 90 counts/min behind paper and behind 5 mm of aluminium. Behind thick lead it is almost 0 counts/min. Which radiation does the source give out?
Extended: alpha, beta and gamma radiation pass between a positive plate and a negative plate. Describe what happens to each.
Extended: why is the beta path more curved than the alpha path in the same field?
Extended: give two reasons why alpha radiation is more strongly ionising than beta radiation.
References
Cambridge IGCSE Physics 0625 syllabus (2026 to 2028), section 5.2.2, The three types of nuclear emission.
OpenStax College Physics 2e, Chapter 31, Radioactivity and Nuclear Physics.
Enroll free in Detecting Radiation and the Three Emissions
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Count the course towards the certificate for its chapter.