A transformation moves a shape or changes its size. This lesson covers the two that keep the shape the same size and the same form: the reflection in a mirror line and the translation by a column vector. You find images on a grid, give the equation of a mirror line, and describe each move in words.
about 35 min2 simulations1 practice question
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Parts of this chapter are marked Extended. They are tested only on the Extended papers of Cambridge IGCSE Mathematics. If you sit the Core papers, you can read them as a stretch.
Moving a shape on a grid
Look at a letter F on a sheet of paper. Slide it across the desk and it is still an F. Turn the paper over and hold it to a window, and you see the letter the other way round. These are two different moves.
A transformation moves a shape to a new place, or changes its size. The shape you start with is the object. The shape you finish with is the image. We label the corners of the object A, B, C and the corners of the image A′, B′, C′. We read A′ as "A dash".
In this chapter there are four transformations: reflection, translation, rotation and enlargement. This lesson teaches the first two. In the examination, draw every straight edge with a ruler.
Reflection
Stand in front of a mirror. Your image is as far behind the mirror as you are in front of it. A reflection on a grid works the same way. The mirror line is a straight line. Every point of the image is the same distance from the mirror line as the matching point of the object, on the other side.
A grid with x from 0 to 10 and y from 0 to 5. The blue triangle ABC has corners A(1, 1), B(4, 1) and C(1, 3). A dashed green vertical line marks the mirror line x equals 5. The red triangle A'B'C' is its mirror image on the right with corners A'(9, 1), B'(6, 1) and C'(9, 3).
The picture shows the triangle ABC with A(1,1), B(4,1) and C(1,3), and the mirror line x=5. The point B is 1 unit to the left of the line, so B′ is 1 unit to the right: B′(6,1). The point A is 4 units from the line, so A′ is 4 units on the other side: A′(9,1).
Three facts hold for every reflection.
The line joining a point to its image meets the mirror line at a right angle.
The mirror line cuts that joining line in half.
The object and the image are the same size and shape (they are congruent), but the image is the other way round.
Core: a vertical or a horizontal mirror line. For the vertical line x=a, the y-coordinate does not change. The mirror line is halfway between x and x′, so 2x+x′=a. We want x′, so x′=2a−x. For the horizontal line y=b, the x-coordinate does not change, and in the same way y′=2b−y.
Reflect P(2,7) in y=4. The x-coordinate stays 2. The point is 3 units above the line, so the image is 3 units below it: y′=2×4−7=1. The image is P′(2,1).
The points that lie on the mirror line do not move. Reflect (5,3) in x=5: x′=2×5−5=5. The image is the point itself.
Translation
A translation slides every point of a shape the same distance in the same direction. Nothing turns, and nothing flips. The image is congruent to the object and faces the same way.
We describe a translation by a column vector(qp).
The top number p is the move to the right. A negative p means a move to the left.
The bottom number q is the move up. A negative q means a move down.
A grid with x from 0 to 10 and y from 0 to 6. The blue triangle ABC has corners A(1, 3), B(4, 3) and C(1, 5). The red triangle A'B'C' has corners A'(6, 1), B'(9, 1) and C'(6, 3). A dashed arrow from A to A' shows a move of 5 to the right and 2 down.
In the picture, triangle ABC with A(1,3), B(4,3) and C(1,5) is translated by (−25). Every point moves 5 to the right and 2 down. So A′(6,1), B′(9,1) and C′(6,3).
To find the vector from an object point to its image, take the image minus the object, with the x part on top. From A(1,3) to A′(6,1) the vector is (1−36−1)=(−25). Check that a second point gives the same vector. We study vectors in the next course.
Extended: any straight mirror line
In the Extended papers the mirror line can be sloping. The two lines you meet most are y=x and y=−x.
A grid with x and y from 0 to 5. The blue triangle ABC has corners A(1, 2), B(4, 2) and C(1, 4). A dashed green line y equals x is the mirror line. The red triangle A'B'C' has corners A'(2, 1), B'(2, 4) and C'(4, 1).
Reflection in y=x. Swap the coordinates: (x,y) goes to (y,x). The picture shows A(1,2), B(4,2) and C(1,4) going to A′(2,1), B′(2,4) and C′(4,1).
Reflection in y=−x. Swap the coordinates and change both signs: (x,y) goes to (−y,−x). For example (3,1) goes to (−1,−3).
Other sloping lines. For y=x+c the rule is (x,y) goes to (y−c,x+c). For y=−x+c it is (x,y) goes to (c−y,c−x). On a grid you can also count diagonally from the mirror line.
Giving the mirror line. To describe a reflection, you must give the equation of the mirror line. Find the line from a point and its image. The mirror line passes through the midpoint of the point and its image. It is at a right angle to the line that joins them.
Example: P(2,6) is reflected to P′(4,4). The midpoint is (3,5). The line PP′ goes down 2 for every 2 across, so its gradient is −1. The mirror line is at a right angle to it, so its gradient is 1. Through (3,5) that is y=x+2.
Combinations. The Extended papers can ask for one transformation followed by another. Do them one at a time, and draw the first image before the second. The order matters: reflecting and then translating usually gives a different image from translating and then reflecting.
Practise with new numbers
Try it in Python
The program reflects the triangle in the line x=5. It also reflects it in y=x and translates it by (−23). Each time it prints the image of every corner.
Common mistakes
Counting from the wrong place. Count the distance to the mirror line, not to the y-axis.
Changing the wrong coordinate. In a reflection in a vertical line the y-coordinate stays the same. In a horizontal line the x-coordinate stays the same.
Mixing up the two numbers of a vector. The top number is the move right. The bottom number is the move up.
Forgetting a minus. A move to the left or down is a negative number.
A sloping line described as "reflection in the line y". Always give the full equation, such as y=x+2.
Remember these
A point and its image are the same distance from the mirror line, on opposite sides.
A reflection in x=a sends (x,y) to (2a−x,y). A reflection in y=b sends (x,y) to (x,2b−y).
A translation by (qp) adds p to every x and q to every y.
Reflection and translation keep the size and the shape. A translation also keeps the direction the shape faces.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
The point (3,6) is reflected in the line x=1. Write down the image.
The point (4,−2) is reflected in the x-axis. Write down the image.
A triangle has a corner at (2,5). The corner moves to (−1,3) in a translation. Write down the column vector.
Extended. Write down the image of the point (2,5) in the line y=x.
Extended. A point (1,4) is reflected to (5,4). Give the equation of the mirror line.
References
Cambridge International, IGCSE Mathematics 0580 syllabus (2025, 2026 and 2027), section 7.1 Transformations: reflection in a straight line and translation by a column vector (Core and Extended).
Enroll free in Reflection, Rotation, Translation and Enlargement
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.