An enlargement changes the size of a shape and keeps its form. It is described by a centre and a scale factor. You enlarge shapes by positive and fractional scale factors and work with areas. In the Extended content you use negative scale factors, find the centre and the scale factor, and describe any single transformation completely.
about 30 min1 simulation1 practice question
Lesson 3 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Same shape, different size
A photograph and its poster are the same picture at two sizes. Every length on the poster is the same number of times longer than on the photo, and every angle is the same. This is an enlargement.
An enlargement needs two things.
The centre of enlargement. A fixed point.
The scale factor k. The number that multiplies every distance from the centre.
To enlarge a shape, take each corner P. Draw a line from the centre C through P. The image P′ is on that line, with CP′=k×CP.
A grid with x from 0 to 10 and y from 0 to 7. The small blue triangle has corners A(1, 1), B(3, 1) and C(1, 2). The large red triangle is its enlargement from the origin with scale factor 3, with corners A'(3, 3), B'(9, 3) and C'(3, 6). Dashed lines from the origin pass through each pair of matching corners.
The picture shows the triangle A(1,1), B(3,1), C(1,2) enlarged from the origin with scale factor 3. Each corner moves along its line from the centre to three times its distance: A′(3,3), B′(9,3), C′(3,6).
On a grid from the origin, multiply both coordinates by k. From another centre (h,m), use the relative-position method of the last lesson: find each corner's position relative to the centre, multiply it by k, and add the centre back.
What an enlargement keeps and changes
Lengths are multiplied by k. The edge AB is 2 units long and A′B′ is 6 units.
Angles do not change. The image has the same shape: it is similar to the object.
Areas are multiplied by k2. The triangle ABC has area 21×2×1=1 square unit. The image has area 32×1=9 square units. Check: base 6, height 3, area 21×6×3=9.
Fractional scale factors. If 0<k<1 the image is smaller. With k=21 the image corner is halfway from the centre to the object corner.
Example: enlarge the point P(2,6) from the centre C(6,2) with scale factor 21. Relative to C, P is (−4,4). Half of that is (−2,2). Add the centre back: P′=(6−2,2+2)=(4,4).
Extended: a negative scale factor
With a negative scale factor the image is on the opposite side of the centre, and the shape looks turned upside down.
A grid with x from minus 7 to 4 and y from minus 5 to 3. The small blue triangle has corners A(1, 1), B(3, 1) and C(1, 2). The red triangle is its enlargement from the origin with scale factor minus 2, on the other side of the origin, with corners A'(minus 2, minus 2), B'(minus 6, minus 2) and C'(minus 2, minus 4). Dashed lines from each corner pass through the origin to its image.
The picture shows the same triangle enlarged from the origin with k=−2. Each corner goes through the centre to twice its distance on the other side: A′(−2,−2), B′(−6,−2), C′(−2,−4). The image is twice as big, and it is a 180∘ turn of the shape that k=2 would give.
The size of the scale factor is 2. Areas are still multiplied by k2=4.
Finding the centre and the scale factor
A grid with x from minus 1 to 9 and y from 0 to 6. The small blue triangle PQR has corners P(2, 2), Q(4, 2) and R(2, 3). The larger red triangle P'Q'R' has corners P'(4, 3), Q'(8, 3) and R'(4, 5). Dashed lines through P and P', through Q and Q' and through R and R' all meet at the violet point (0, 1), the centre of enlargement.
The centre. To describe an enlargement you must give its centre. Draw a straight line through each corner of the object and the matching corner of the image. The lines meet at the centre of enlargement. Two lines are enough. In the picture the lines through P(2,2) and P′(4,3), and through Q(4,2) and Q′(8,3), meet at (0,1).
The scale factor. Divide a length of the image by the matching length of the object. Here PQ=2 and P′Q′=4, so k=4÷2=2. The image is on the same side of the centre as the object, so k is positive. If the image is on the opposite side, k is negative.
Extended: describing a transformation
In an examination you may be asked to describe a single transformation. Name it, and give the details it needs.
Reflection: the equation of the mirror line.
Translation: the column vector.
Rotation: the centre, the angle and the direction.
Enlargement: the centre and the scale factor.
Questions may combine two transformations. Do the first, draw its image, and then do the second to that image. Two reflections in parallel mirror lines x=2 and then x=5 together move every point 6 units to the right, because each point goes 2×(5−2)=6 units. That is a translation by (06).
Practise with new numbers
Try it in Python
The program enlarges a triangle from the origin with three scale factors, including a fraction and a negative number. It compares the area of the image with the area of the object, and with k2.
Common mistakes
Adding the scale factor. Enlarging by 2 means multiplying distances from the centre by 2, not adding 2.
Measuring from the origin. Measure from the centre of enlargement, which may be elsewhere.
Scaling the area by k. The area is multiplied by k2.
Calling a smaller image "not an enlargement". A scale factor between 0 and 1 is still an enlargement.
A half description. An enlargement needs both the centre and the scale factor.
Remember these
An enlargement is described by the centre and the scale factor k. Distances from the centre are multiplied by k.
Lengths are multiplied by k, angles stay the same and areas are multiplied by k2.
A scale factor between 0 and 1 makes the shape smaller. A negative scale factor puts the image on the other side of the centre.
To find the centre, join matching corners. To find k, divide an image length by the object length.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Enlarge the point (2,3) from the origin with scale factor 4.
A rectangle is 6cm by 4cm. It is enlarged with scale factor 21. Find the dimensions of the image.
A shape of area 5cm2 is enlarged with scale factor 3. Find the area of the image.
Extended. Enlarge (4,2) from the origin with scale factor −3.
Extended. A triangle has a side of 4cm. Its image has the matching side 10cm and lies on the same side of the centre. Find the scale factor and the ratio of the areas.
References
Cambridge International, IGCSE Mathematics 0580 syllabus (2025, 2026 and 2027), section 7.1 Transformations: enlargement (Core: positive and fractional scale factors; Extended: negative scale factors and combinations).
Enroll free in Reflection, Rotation, Translation and Enlargement
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.