Rain, rivers and lakes are the first source of our drinking water, and they hold much more than water. You find out what natural water contains, which of it is useful and which is harmful, and the four steps that make it safe.
about 25 min1 simulation2 practice questions
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
What is in natural water?
Water from a river, lake or well is never pure. On its way it picks up many things. A water works has to deal with each one. The substances that you must know are these.
dissolved oxygen, from the air,
metal compounds, from rocks and soil,
plastics, from litter,
sewage, from drains and farms,
harmful microbes, which are tiny living things that cause disease,
nitrates from fertilisers,
phosphates from fertilisers and from detergents.
Which of these help, and which harm?
Not everything dissolved in water is bad.
Helpful substances.
Dissolved oxygen lets fish and other water animals breathe.
Some metal compounds give us minerals that the body needs, such as calcium compounds for bones and teeth.
Harmful substances.
Some metal compounds are toxic. Compounds of lead and mercury are poisonous.
Some plastics harm aquatic life. Animals swallow them or become tangled in them.
Sewage contains harmful microbes. They cause diseases such as cholera.
Nitrates and phosphates lead to a loss of dissolved oxygen, called deoxygenation. They feed the growth of water plants and algae. When these die and rot, microbes use up the oxygen, and the fish suffocate. You need not know the full details.
How is water made safe to drink?
A water works treats the water in steps. Each step removes one kind of impurity.
Sedimentation. The water rests in a large tank. Heavy solids sink to the bottom.
Filtration. The water flows through beds of sand and gravel. They trap the fine solids that did not sink.
Carbon. The water passes through carbon. Carbon takes out the substances that give a bad taste or smell.
Chlorination. A little chlorine is added. It kills the microbes.
The steps are in this order for a reason. First the solids are taken out, so that nothing hides the microbes from the chlorine. Chlorine comes last, and a little of it stays in the water on its way to your tap.
A flow chart of water treatment from left to right: a river or reservoir, then a sedimentation tank where solids sink, then a sand and gravel filter, then a carbon filter that removes tastes and smells, then chlorination that kills microbes, and then the water supply to homes. Each box has a short label for what it does.
Notice that these steps do not remove dissolved salts. That is why tap water is not the same as distilled water.
You should find that the mass of chlorine grows in proportion to both the volume and the dose. Doubling the tank doubles the chlorine, and so does doubling the dose.
Practise with new numbers
Try it in Python
This program works out the chlorine for a tank, and names the step of treatment that removes a given impurity.
Common mistakes
Saying that chlorine removes smells. Carbon does that. Chlorine kills microbes.
Saying that all substances in natural water are harmful. Dissolved oxygen is needed by fish.
Saying that treated tap water is pure. The treatment leaves dissolved salts in the water.
Mixing up sedimentation and filtration. In sedimentation solids sink. In filtration the water flows through sand and gravel.
Remember these
Natural water holds dissolved oxygen, metal compounds, plastics, sewage, microbes, nitrates and phosphates.
Dissolved oxygen and some metal compounds help. Toxic metal compounds, plastics, sewage, nitrates and phosphates harm.