A graph of a reaction rises steeply at first and then goes flat. This lesson shows how to read it: the slope is the rate, the flat part means the reaction has stopped, and the end height tells you how much was made.
about 30 min1 simulation2 practice questions
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
What a rate graph looks like
Plot the total volume of gas made against the time. The graph from the last lesson looks like this.
A graph of the volume of gas in cm3 against time in seconds. Six points are joined by lines: 0 s and 0 cm3, 20 s and 18 cm3, 40 s and 32 cm3, 60 s and 42 cm3, 80 s and 48 cm3, 100 s and 50 cm3. The curve is steep at the start and flat at the end. A dashed red tangent line at 40 s has a slope of 0.6 cm3 per second.
At the start the line is steep. A lot of gas forms in each second, so the rate is high.
Later the line gets less steep. The reaction is slowing down.
At the end the line is flat. No more gas forms, so the rate is zero. The reaction has stopped.
The reaction stops because one reactant has been used up. That reactant is the limiting reactant. The other reactant is in excess.
The slope is the rate
On a graph of volume against time, the gradient (slope) is the rate.
rate=change in timechange in volume
A steeper line means a faster reaction. A flat line means no reaction.
To find the mean rate over a stretch, join the two points with a straight line and find its gradient.
To find the rate at one moment, draw a tangent. This is a straight line that just touches the curve at that point. Its gradient is the rate at that moment.
Here is an example from the graph. The tangent at 40 s passes through about (20s,20cm3) and (60s,44cm3). Its gradient is 60−2044−20=0.60cm3/s. That is the rate at 40 s.
Comparing two experiments
Two experiments on the same reaction are drawn on one graph. Look at two things: how steep the line starts, and how high it ends.
A line that is steeper at the start belongs to the faster reaction. For example, powder reacts faster than lumps.
Two lines that end at the same height mean the same amount of product. The same amount of the limiting reactant was used.
A line that ends higher means more product. More of the limiting reactant was used. Faster or slower has nothing to do with it.
So the end height tells you how much, and the steepness tells you how fast. Keep these two ideas apart.
How high will the line end?
You can predict the end volume. The equation tells you how many moles of gas form. At room temperature and pressure, one mole of any gas fills 24000cm3 (24dm3).
For example, 1.0 g of marble is 1001.0=0.010 mol of calcium carbonate. One mole of calcium carbonate gives one mole of carbon dioxide, so the line ends at 0.010×24000=240cm3, as long as the acid is in excess.
Practise with new numbers
Try it in Python
The program finds the slope at every point of the graph and shows that the rate keeps falling.
Common mistakes
Reading the height as the rate. The height is how much has formed. The slope is the rate.
Saying a flat line is a fast reaction. A flat line means the reaction has stopped.
Thinking that a faster reaction makes more product. The end volume depends on the amount of the limiting reactant.
Drawing the tangent through two points far apart. The tangent must touch the curve at one point only.
Mixing the axes. The gradient is the change in volume divided by the change in time, not the other way round.
Remember these
On a volume against time graph, the gradient is the rate. The tangent at a point gives the rate at that moment.
A steep line is a fast reaction, and a flat line means the reaction has stopped.
The end height depends on the amount of the limiting reactant, not on the rate.
At room temperature and pressure, one mole of any gas fills 24000cm3.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Curve A is steeper than curve B at the start. Both end at 60cm3. Which reaction is faster, and what do you know about the amounts used?
What does a flat part at the end of the line tell you?
A tangent rises by 27cm3 over 45 s. What is the rate at that point?
The same reaction is run again with twice as much of the limiting reactant. How does the end of the line change?
What volume of carbon dioxide forms from 0.025 mol of calcium carbonate with excess acid at room temperature and pressure?
References
Cambridge IGCSE Chemistry 0620 syllabus for 2026 to 2028, section 6.2 (Rate of reaction), Core 3 and 4.