A fizzing test tube, a pop from a flame and a milky liquid: each is a clear sign. This lesson teaches the tests for six gases and the flame tests for six metal ions, with the exact result of each.
about 35 min1 simulation2 practice questions2 Python programs5 questions to check yourself
This lesson is free to read. Enroll free to keep your place and take the tests.
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
How a chemist names a gas
Most gases are colourless, so looking is not enough. A chemist makes a test: one action that gives one clear result. You need to know the action and the result, word for word.
You already know where some gases come from. A carbonate and a dilute acid make carbon dioxide. A metal and a dilute acid make hydrogen. An ammonium salt warmed with an alkali makes ammonia. The electrolysis of concentrated sodium chloride solution makes chlorine and hydrogen. Now you learn how to name each one.
The six gas tests
Ammonia, NH3. Hold damp red litmus paper in the gas. The paper turns blue.
Carbon dioxide, CO2. Bubble the gas through limewater. The limewater turns milky.
Chlorine, Cl2. Hold damp litmus paper in the gas. The paper is bleached.
Hydrogen, H2. Hold a lighted splint at the mouth of the tube. The gas 'pops'.
Oxygen, O2. Put a glowing splint into the gas. It relights.
Sulfur dioxide, SO2. Use acidified aqueous potassium manganate(VII). It turns from purple to colourless.
Learn them in pairs of action and result. A lighted splint and a glowing splint are different: a lighted splint has a flame, a glowing splint has only a red-hot tip. The lighted splint gives the pop of hydrogen. The glowing splint is for oxygen.
Why the litmus paper is damp. Ammonia and chlorine must dissolve in the water on the paper before they act on the dye. Dry paper does not show the change.
Limewater is a saturated solution of calcium hydroxide in water. When carbon dioxide passes through it, a fine white solid forms. This makes the liquid look milky.
A careful note. In this syllabus each result is matched with one gas, and that is how the questions are set. In a real laboratory, sulfur dioxide also turns limewater milky, and it also bleaches damp litmus paper. So a chemist uses the test together with what is known about the reaction.
Extended: equations and volumes
The Supplement asks for symbol equations with state symbols. The limewater test is
Ca(OH)2(aq)+CO2(g)→CaCO3(s)+H2O(l)
The solid CaCO3(s) is what makes the milkiness. The Supplement also uses the molar gas volume: one mole of any gas fills 24dm3 at room temperature and pressure (r.t.p.). So the volume of a gas is its moles times 24.
A drawing of six flames in two rows of three, each with its colour written above it and its metal ion below it. Lithium, Li+, gives a red flame. Sodium, Na+, gives a yellow flame. Potassium, K+, gives a lilac flame. Calcium, Ca2+, gives an orange-red flame. Barium, Ba2+, gives a light green flame. Copper(II), Cu2+, gives a blue-green flame.
Flame tests for metal ions
Some metal ions give their salts a colour when heated in a flame. The test is simple.
Dip a clean wire into the sample, or into the solid moistened with water.
Hold the wire in the edge of a blue Bunsen flame.
Look at the colour of the flame.
The colours to learn are:
lithium, Li+: red
sodium, Na+: yellow
potassium, K+: lilac
calcium, Ca2+: orange-red
barium, Ba2+: light green
copper(II), Cu2+: blue-green
Red and orange-red look alike, so a chemist does not rely on the flame alone to tell lithium from calcium. A flame test names the metal ion. It tells you nothing about the anion in the salt. A trace of sodium in the wire can hide other colours with its strong yellow.
The line is straight, because the moles of gas are in proportion to the mass of carbonate. Twice the mass gives twice the gas.
Practise with new numbers
Try it in Python
The program names a gas from the test and the result.
The next program does the same for flame colours.
Common mistakes
Mixing up the two splints. The lighted splint pops with hydrogen. The glowing splint relights in oxygen.
Using dry litmus paper. The paper must be damp for ammonia and chlorine.
Saying that limewater turns white. It turns milky.
Saying that a flame test names the salt. It names only the metal ion.
Writing the gas test result loosely. "It changes colour" is not a result. Give the colour.
Remember these
Ammonia: damp red litmus paper turns blue. Carbon dioxide: limewater turns milky. Chlorine: damp litmus paper is bleached.
Hydrogen: a lighted splint pops. Oxygen: a glowing splint relights. Sulfur dioxide: acidified aqueous potassium manganate(VII) turns from purple to colourless.
Extended: Ca(OH)2(aq)+CO2(g)→CaCO3(s)+H2O(l). One mole of gas fills 24dm3 at r.t.p.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A gas turns damp red litmus paper blue. Which gas is it?
A student puts a lighted splint at the mouth of a tube in which magnesium is reacting with dilute hydrochloric acid. What does the student hear, and which gas is it?
Why is the litmus paper wetted before a test for chlorine?
A wire dipped in a salt gives a lilac flame, and another salt gives a light green flame. Name the two metal ions.
A reaction gives off 0.45 mol of carbon dioxide at room temperature and pressure. What volume is that?
References
Cambridge IGCSE Chemistry 0620 syllabus for 2026 to 2028, section 12.5 (Identification of ions and gases), parts 3 and 4, and the notes for use in qualitative analysis.
Cambridge IGCSE Chemistry 0620 syllabus, sections 3.1 and 3.3, for the Extended equations and gas volumes.
Enroll free in Identifying Ions and Gases
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.