Tests for cations with sodium hydroxide and ammonia
Add a few drops of colourless liquid to a colourless solution and a blue, green or red-brown solid appears. This lesson teaches the sodium hydroxide and ammonia tests for eight cations, and how to tell the look-alikes apart.
about 30 min1 simulation2 practice questions
Lesson 3 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
The method
A cation is a positive ion. Most metal ions in solution are colourless, so we change them into coloured or white solids. Put a little of the solution in two test tubes. Add aqueous sodium hydroxide to the first and aqueous ammonia to the second.
Add the reagent a few drops at a time. Note the colour of any ppt.
Keep adding until the reagent is in excess, which means more than enough. Note whether the ppt. dissolves.
The table, one cation at a time
Each line gives the effect of aqueous sodium hydroxide, then of aqueous ammonia.
Aluminium, Al3+. Sodium hydroxide: a white ppt., soluble in excess, giving a colourless solution. Ammonia: a white ppt., insoluble in excess.
Ammonium, NH4+. Sodium hydroxide: ammonia is produced on warming. There is no ammonia test for this ion.
Calcium, Ca2+. Sodium hydroxide: a white ppt., insoluble in excess. Ammonia: no ppt. or a very slight white ppt.
Chromium(III), Cr3+. Sodium hydroxide: a green ppt., soluble in excess. Ammonia: a green ppt., insoluble in excess.
Copper(II), Cu2+. Sodium hydroxide: a light blue ppt., insoluble in excess. Ammonia: a light blue ppt., soluble in excess, giving a dark blue solution.
Iron(II), Fe2+. Sodium hydroxide: a green ppt., insoluble in excess, which turns brown near the surface on standing. Ammonia: the same result.
Iron(III), Fe3+. Sodium hydroxide: a red-brown ppt., insoluble in excess. Ammonia: a red-brown ppt., insoluble in excess.
Zinc, Zn2+. Sodium hydroxide: a white ppt., soluble in excess, giving a colourless solution. Ammonia: a white ppt., soluble in excess, giving a colourless solution.
The table looks long, but it has a pattern. Learn the colours first: white, green, light blue and red-brown. Then learn which ppt. dissolves in excess.
A flow chart for naming a cation with aqueous sodium hydroxide. At the top: add aqueous sodium hydroxide. No ppt. and ammonia produced on warming: ammonium. Red-brown ppt.: iron(III). Light blue ppt.: copper(II). Green ppt.: if it dissolves in excess it is chromium(III), and if it is insoluble and turns brown near the surface on standing it is iron(II). White ppt.: if it is insoluble in excess it is calcium. If it dissolves in excess, add aqueous ammonia: a white ppt. insoluble in excess is aluminium, and a white ppt. that dissolves in excess is zinc. A note says that calcium gives no ppt. or a very slight white ppt. with aqueous ammonia.
Telling look-alikes apart
Iron(II) and iron(III). Both give a ppt. insoluble in excess. The colour decides: green for iron(II), red-brown for iron(III).
Chromium(III) and iron(II). Both give a green ppt. The chromium ppt. dissolves in excess sodium hydroxide. The iron(II) ppt. does not, and it turns brown near the surface on standing.
Aluminium, calcium and zinc. All three give a white ppt. with sodium hydroxide. Calcium is the one that does not dissolve in excess. To separate aluminium from zinc, use aqueous ammonia: the aluminium ppt. is insoluble in excess and the zinc ppt. dissolves.
A white ppt. with sodium hydroxide is therefore not enough to name a cation. You need the excess test and, for aluminium and zinc, the ammonia test. A good chemist always asks: which cations could this still be?
The ammonium ion
The ammonium ion does not give a ppt. Add aqueous sodium hydroxide and warm the mixture. Ammonia is produced. Test the gas with damp red litmus paper. It turns blue. This is the same ammonia test that you met in the first lesson.
Extended: the ionic equation of a hydroxide ppt.
A ppt. forms when the metal ion meets hydroxide ions. For copper(II) and iron(III):
Cu2+(aq)+2OH−(aq)→Cu(OH)2(s)
Fe3+(aq)+3OH−(aq)→Fe(OH)3(s)
The charge on the ion is the number of hydroxide ions that it needs. So a 3+ ion needs three moles of hydroxide ions for each mole of metal ions, and a 2+ ion needs two. With the moles, you can find the volume of sodium hydroxide that just forms the whole ppt.
The 3+ ion needs one and a half times the volume that the 2+ ion needs, because three hydroxide ions are used against two.
Practise with new numbers
Try it in Python
The program matches what you see to the cations in the table.
Common mistakes
Naming a cation from one test. A white ppt. with sodium hydroxide fits aluminium, calcium and zinc. Do the excess test.
Mixing up the two iron ions. Green is iron(II). Red-brown is iron(III).
Forgetting the ammonia test. It is the only way here to tell aluminium from zinc.
Saying that the ammonium ion gives a ppt. It gives ammonia gas when warmed with sodium hydroxide.
Writing "blue ppt." for copper(II). The ppt. is light blue. The solution in excess ammonia is dark blue.
Remember these
White ppt. with sodium hydroxide: aluminium, calcium or zinc. Soluble in excess: aluminium or zinc. Insoluble: calcium.
Aluminium with ammonia: white ppt. insoluble in excess. Zinc: white ppt. soluble in excess.
Copper(II): light blue ppt.; in excess ammonia a dark blue solution. Iron(II): green ppt. that turns brown near the surface. Iron(III): red-brown ppt. Chromium(III): green ppt. soluble in excess sodium hydroxide.
Ammonium: ammonia produced on warming with sodium hydroxide. Calcium with ammonia: no ppt. or a very slight white ppt.
Extended: a metal ion of charge n+ needs n hydroxide ions, as in Cu2+(aq)+2OH−(aq)→Cu(OH)2(s).
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A solution gives a light blue ppt. with aqueous ammonia. In excess the ppt. dissolves and the solution is dark blue. Which cation is it?
How do you tell iron(II) ions from iron(III) ions with sodium hydroxide?
Two solutions both give a white ppt. that dissolves in excess sodium hydroxide. One is aluminium nitrate and one is zinc nitrate. What test tells them apart, and what do you see?
What do you do to show that a solution contains ammonium ions?
How many moles of hydroxide ions are needed to precipitate all the Fe3+ in 0.0020 mol of iron(III) ions?
References
Cambridge IGCSE Chemistry 0620 syllabus for 2026 to 2028, section 12.5, part 2 (cations), and the notes for use in qualitative analysis.
Cambridge IGCSE Chemistry 0620 syllabus, section 3.1, for ionic equations.
Enroll free in Identifying Ions and Gases
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.