Copper(II) sulfate and the purifying of copper ·… | StemPy Lab
Course 10.2·Lesson 3 of 3
Copper(II) sulfate and the purifying of copper
Copper(II) sulfate solution is bright blue. Electrolyse it between graphite rods and the blue fades. Electrolyse it between copper rods and the blue stays. Why? And how does this help to make pure copper for electric wires? This is an Extended lesson.
about 30 min1 simulation2 practice questions
Lesson 3 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Aqueous copper(II) sulfate with graphite electrodes
The solution contains Cu2+ and SO42− from the salt, and H+ and OH− from the water. Copper is below hydrogen in the reactivity series, and there is no halide. The two rules give:
Cathode (negative). The copper ions are changed. A pink-brown solid (copper) coats the cathode: Cu2++2e−→Cu.
Anode (positive).Oxygen forms. You see bubbles of a colourless gas that relights a glowing splint: 4OH−→2H2O+O2+4e−.
The solution. The blue colour fades, because Cu2+ ions are used up. The H+ ions and the SO42− ions that are left make sulfuric acid, so the solution becomes acidic.
The overall equation is 2CuSO4+2H2O→2Cu+O2+2H2SO4.
Aqueous copper(II) sulfate with copper electrodes
Now both electrodes are made of copper. The cathode does the same as before: copper ions gain electrons and a layer of copper grows on it. But the anode is not inert. It takes part, because copper atoms lose electrons more easily than the hydroxide ions do:
Cu→Cu2++2e−
The anode gets smaller, because copper dissolves.
The cathode gets bigger, because copper is deposited.
The mass lost by the anode equals the mass gained by the cathode.
There is no gas.
The blue colour stays the same, because every copper ion that leaves the solution at the cathode is replaced by one that enters it at the anode.
Two cells side by side, both with copper(II) sulfate solution. On the left the electrodes are graphite: a pink-brown layer of copper grows on the cathode, bubbles of oxygen rise at the anode, and the blue colour fades. On the right the electrodes are copper: the cathode gets bigger, the anode gets smaller by the same mass, there is no gas, and the blue colour stays the same.
Notice the link with electroplating in the first course. A copper plating bath is this cell with the object as the cathode. The Class 12 chapter on electrochemistry returns to these cells and counts the charge with Faraday's laws.
Purifying copper
Copper for electric wires must be very pure, because small amounts of other metals make it a worse conductor. Copper from the furnace is about 99 per cent pure. It is purified by electrolysis in a cell like the one with copper electrodes:
The anode is a thick block of impure copper.
The cathode is a thin sheet of pure copper.
The electrolyte is copper(II) sulfate solution.
Copper dissolves from the anode and is deposited on the cathode. The pure copper cathode grows and the impure anode shrinks. Impurities that are less reactive than copper, such as silver and gold, do not dissolve. They fall to the bottom as a sludge, which is collected and sold.
Practise with new numbers
Try it in Python
The program compares the cell with graphite electrodes with the cell with copper electrodes.
Common mistakes
Writing oxygen at the anode when the electrodes are copper. The anode dissolves instead, and there is no gas.
Saying that the colour fades in both cells. It fades only with graphite. With copper electrodes it stays the same.
Forgetting the acid. With graphite electrodes, the solution becomes acidic.
Mixing up which electrode gets smaller. The anode loses copper and the cathode gains it.
Writing Cu+. The copper ion in copper(II) sulfate is Cu2+.
Remember these
Graphite electrodes: copper at the cathode, oxygen at the anode, the blue colour fades and the solution becomes acidic.
Copper electrodes: the anode dissolves, the cathode gains the same mass, there is no gas and the blue colour stays.
Extended: Cu2++2e−→Cu at the cathode, and Cu→Cu2++2e− at the anode.
To purify copper, the anode is impure copper and the cathode is pure copper.
Silver and gold fall as sludge.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Describe two things that you see during the electrolysis of copper(II) sulfate solution with graphite electrodes.
What happens to the mass of each electrode when copper(II) sulfate solution is electrolysed with copper electrodes?
Why does the blue colour stay the same with copper electrodes?
Describe how impure copper is purified by electrolysis.
0.20 mol of electrons pass through copper(II) sulfate with copper electrodes. By how much does the mass of the cathode increase? Ar of copper is 64.
References
Cambridge IGCSE Chemistry 0620 syllabus for 2026 to 2028, section 4.1 (Electrolysis), Supplement 9 and 11.