Brine and dilute sulfuric acid · Chemistry Class 9–10 | StemPy Lab
Course 10.2·Lesson 1 of 3
Brine and dilute sulfuric acid
Swimming pool water, a battery acid and the salt in the sea are all solutions, and water is in every one of them. When a current passes through a solution, the water can take part too. This lesson starts with two solutions that every candidate must know: concentrated sodium chloride solution and dilute sulfuric acid.
about 30 min1 simulation2 practice questions
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Water changes the story
You met the electrolysis of brine in the course on salts and their uses. Here we explain it in full. In a molten compound the only ions are the ones from the compound. A solution in water has more. Water itself breaks up a very little into hydrogen ions and hydroxide ions:
H2O⇌H++OH−
So a solution of sodium chloride contains four kinds of ion: Na+ and Cl− from the salt, and H+ and OH− from the water. At each electrode, only one kind of ion is changed. Which one? Two rules decide this, and you will use them for every solution.
The cathode rule. Positive ions go to the cathode. If the metal is less reactive than hydrogen (copper and silver), the metal ions are changed and the metal forms. If the metal is more reactive than hydrogen (potassium, sodium, calcium, magnesium and aluminium), hydrogen ions are changed instead and hydrogen forms. The result is the same as in the lesson on molten compounds: the cathode gives a metal or hydrogen.
The anode rule. Negative ions go to the anode. If the solution is a concentrated halide (chloride, bromide or iodide), the halogen forms. Otherwise hydroxide ions from the water are changed and oxygen forms. Sulfate ions are never changed at the anode in these cells.
A flow chart for predicting the products of the electrolysis of an aqueous solution with inert electrodes. At the cathode: is the metal below hydrogen in the reactivity series? If yes, the metal forms. If no, hydrogen forms. At the anode: is there a halide ion in a concentrated solution? If yes, the halogen forms. If no, oxygen forms.
Concentrated sodium chloride solution (brine)
Brine contains Na+, Cl−, H+ and OH−. Use inert electrodes of graphite or platinum.
Cathode (negative). Sodium is more reactive than hydrogen, so hydrogen forms. You see bubbles of a colourless gas. It burns with a squeaky pop when you hold a lighted splint in it.
Anode (positive). The solution is concentrated, so the chloride ions are changed and chlorine forms. You see bubbles of a pale green-yellow gas. It bleaches damp litmus paper.
What is left. The Na+ ions stay in the solution. The H+ ions have left as hydrogen, so OH− ions are left behind with them. The solution turns into sodium hydroxide solution, which is alkaline.
The overall equation is 2NaCl+2H2O→2NaOH+H2+Cl2. All three products are useful. Chlorine is used to treat drinking water and to make bleach and plastics such as PVC. Hydrogen is used to make ammonia. Sodium hydroxide is used to make soap and paper.
Dilute sulfuric acid
Dilute sulfuric acid contains H+ and SO42− from the acid and H+ and OH− from the water. Use inert electrodes.
Cathode.Hydrogen forms. It burns with a squeaky pop.
Anode. There is no halide, so hydroxide ions are changed and oxygen forms. It relights a glowing splint.
A drawing of a cell for the electrolysis of dilute sulfuric acid. Two platinum or graphite electrodes stand in a beaker of dilute sulfuric acid and are joined to a battery. Over each electrode is an upside-down tube full of acid that collects gas. The tube over the negative electrode, the cathode, holds twice as much gas as the tube over the positive electrode, the anode. The cathode gas is hydrogen, which burns with a squeaky pop. The anode gas is oxygen, which relights a glowing splint.
Collect the two gases in tubes, as in the picture. The volume of hydrogen is twice the volume of oxygen. The overall change is the splitting of water: 2H2O→2H2+O2. The acid itself is not used up. Water is used up, so the acid slowly becomes more concentrated.
Extended: the half-equations
At the cathode, in every case here where hydrogen forms:
2H++2e−→H2
At the anode, where chlorine forms: 2Cl−→Cl2+2e−. At the anode, where oxygen forms:
4OH−→2H2O+O2+4e−
Four electrons make one O2 molecule, and two electrons make one H2 molecule. So the same electrons give twice as many hydrogen molecules as oxygen molecules. That is why the volume ratio is 2:1.
Choose cell 2 and watch the anode line move up to meet the hydrogen line. A chloride ion gives up one electron, and an H+ ion takes one, so in brine the two gases have equal volumes.
Practise with new numbers
Try it in Python
The program finds the gas volumes in the two cells from the electrons passed.
Common mistakes
Writing sodium as the product at the cathode. Sodium is more reactive than hydrogen, so a solution gives hydrogen. Only a molten compound gives sodium.
Writing oxygen as the anode product of concentrated brine. A concentrated chloride gives chlorine.
Forgetting the sodium hydroxide. The solution left in the cell is alkaline.
Mixing up the tests. Hydrogen: squeaky pop with a lighted splint. Oxygen: relights a glowing splint. Chlorine: bleaches damp litmus paper.
Saying that the acid is used up. Water is used up, and the acid becomes more concentrated.
Remember these
A solution has ions from the compound and ions from water. Only one kind of ion is changed at each electrode.
Cathode: a metal below hydrogen forms the metal, otherwise hydrogen forms. Anode: a concentrated halide gives the halogen, otherwise oxygen forms.
Concentrated sodium chloride: hydrogen and chlorine, and sodium hydroxide is left in solution.
Dilute sulfuric acid: hydrogen and oxygen in the ratio 2:1 by volume.
Extended: 2H++2e−→H2, 2Cl−→Cl2+2e− and 4OH−→2H2O+O2+4e−.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Name the product at each electrode when concentrated sodium chloride solution is electrolysed with inert electrodes.
How do you test for the gas at the cathode and for the gas at the anode in that cell?
What is left in the beaker after concentrated sodium chloride solution has been electrolysed for a long time?
30cm3 of oxygen are collected from dilute sulfuric acid. What volume of hydrogen is collected?
Extended: write the half-equation for the change at the anode in dilute sulfuric acid.
References
Cambridge IGCSE Chemistry 0620 syllabus for 2026 to 2028, section 4.1 (Electrolysis), Core 3(b), 3(c) and 4.