A plastic bucket, a nylon rope and a rubber band are all made of giant molecules. This lesson says what a polymer is, how big its molecules are, and the five ways in which chemists sort polymers into classes.
about 25 min1 simulation1 practice question
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
A bucket, a rope and a rubber band
Pick up a plastic bucket. Then look at a nylon rope and a rubber band. They feel very different. The bucket is stiff, the rope is strong and the rubber band stretches. Yet all three are made of the same kind of molecule. Each molecule is a long chain of small units joined end to end by covalent bonds.
Such a giant molecule is a macromolecule. When it is built from many copies of a small repeating unit, we call it a polymer (Greek poly, many, and meros, part). The small molecules that join to make it are the monomers. The joining reaction is polymerisation.
nCH2=CH2→-[CH2-CH2]n-
Here n is the degree of polymerisation: the number of monomer units in one chain. For a polythene chain n is often a few thousand. A polymer chain therefore has a molar mass of about 104 to 106g/mol. Compare that with water at 18g/mol.
The part in square brackets is the repeat unit. In an addition polymer the repeat unit has the same atoms as the monomer. In a condensation polymer a small molecule, such as water, is lost at each link, so the repeat unit has fewer atoms than the monomers that made it.
Five ways to classify a polymer
A chart of the ways to classify polymers, with five boxes in a column. Box 1, by source: natural (starch, cellulose, proteins, natural rubber), semi-synthetic (cellulose acetate, vulcanised rubber) and synthetic (polythene, nylon 6,6, Buna-S). Box 2, by structure: three small drawings of a linear chain, a branched chain and a cross-linked network. Box 3, by how they form: addition (chain growth) and condensation (step growth). Box 4, by the forces between chains, from weakest to strongest: elastomers, thermoplastics, fibres, and the thermosetting polymers, which set into a network on heating. Box 5, by the monomers: a homopolymer has one monomer, a copolymer has two or more.
1. By source.
Natural polymers come from plants and animals: starch, cellulose, proteins and natural rubber.
Semi-synthetic polymers are natural polymers changed by chemistry: cellulose acetate (rayon) and cellulose nitrate.
Synthetic polymers are made in a factory from small molecules: polythene, nylon 6,6 and Buna-S.
2. By structure.
Linear polymers have long straight chains that pack closely: high density polythene and PVC.
Branched polymers have side chains on the main chain, so the chains cannot pack well: low density polythene.
Cross-linked or network polymers have chains joined to each other by covalent bonds: Bakelite and melamine resin.
3. By how they form.
Addition polymers form when monomers with a double bond add to one another with no loss of atoms. One kind of monomer gives a homopolymer (polythene). Two kinds give a copolymer (Buna-S, from buta-1,3-diene and styrene).
Condensation polymers form when two different groups react and a small molecule, such as water or hydrogen chloride, is lost at each link: nylon 6,6, polyesters and Bakelite.
4. By the forces between the chains. This decides how a polymer behaves when you pull it or heat it.
Elastomers have the weakest forces between chains. The chains are coiled. A pull straightens them, and they coil up again when you let go. A few cross-links help them spring back: natural rubber, Buna-S and neoprene.
Fibres have strong forces, such as hydrogen bonds, between chains that lie side by side. They have high tensile strength: nylon 6,6 and polyester.
Thermoplastics have forces between those of elastomers and fibres. They soften on heating and harden on cooling, again and again: polythene, PVC and polystyrene.
Thermosetting polymers are made from small chains that form many cross-links on heating. Once set, they do not soften again: Bakelite and urea-formaldehyde resin.
5. By how the chain grows.
In chain growth, a reactive centre (often a free radical) adds one monomer at a time to the end of a growing chain.
In step growth, any two molecules with the right end groups can react. Monomers make dimers, dimers make tetramers, and long chains appear only near the end.
Most addition polymers grow by chain growth, and most condensation polymers grow by step growth. A-Level texts and the Indian syllabus use the words addition and condensation. University texts and IUPAC prefer chain growth and step growth. Nylon 6 shows why: the Indian syllabus lists it with the condensation polymers, but it forms when a ring of caprolactam opens, and no small molecule is lost overall.
Choose styrene and then ethene at 1600 units. The styrene chain is much heavier, because each unit carries a benzene ring.
Practise with new numbers
Try it in Python
The program stores ten polymers with their class by forces and by structure. It prints the members of each class.
Common mistakes
Calling every polymer a plastic. Fibres and elastomers are polymers too.
Thinking a copolymer is any condensation polymer. A copolymer has two or more monomers in one chain. Buna-S is an addition copolymer.
Mixing up branched and cross-linked. Branches hang off one chain. Cross-links join two chains by covalent bonds.
Saying a thermosetting polymer melts. It chars when strongly heated, because its network cannot flow.
Giving the repeat unit of a condensation polymer the atoms of both monomers. Water or another small molecule is lost at each link.
Remember these
Polymer: a chain of n repeat units, often 104 to 106g/mol.
Source: natural, semi-synthetic, synthetic.
Structure: linear, branched, cross-linked.
Forces, weakest first: elastomers, thermoplastics, fibres; thermosets are cross-linked networks.
Growth: chain growth adds monomers to an active end; step growth joins any two molecules.
References
NCERT Chemistry Part II for Class 12 (editions before the 2023 rationalisation), the chapter Polymers.
R. J. Young and P. A. Lovell, Introduction to Polymers, the chapter on the concepts and nomenclature of polymers.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Low density polythene and high density polythene have the same repeat unit. Why is one softer?
A polymer softens every time it is heated and can be moulded again. Is it a thermoplastic or a thermoset?
Is Buna-S a homopolymer or a copolymer? Is it an addition or a condensation polymer?
A nylon 6,6 chain has a molar mass of 45200g/mol. The repeat unit has a molar mass of 226g/mol. How many repeat units are there?
Enroll free in Polymers: Classes, Chain Growth and Molar Mass
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.