Salt breaks into small cubes and glass breaks into curved pieces. A crystal has its particles in a pattern that repeats in every direction, and an amorphous solid does not. We sort solids into their kinds, describe the repeat with a lattice and a unit cell, and learn to count the atoms that one unit cell holds.
about 35 min1 simulation2 practice questions
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Two kinds of solid
Look at a grain of table salt with a hand lens. It is a tiny cube with flat faces. Now look at a piece of broken glass. Its edges are curved. Why the difference?
In salt the particles repeat in a fixed pattern over the whole grain. We say it has long-range order, and we call it a crystalline solid. In glass the particles are arranged in order only over a few neighbours, and the pattern is lost further away. Glass has only short-range order. It is an amorphous solid. Rubber, plastics and glass are amorphous. Salt, sugar, ice, metals and quartz are crystalline.
The order shows in the properties:
Melting. A crystal melts sharply at one temperature, because every bond of the same kind breaks at the same energy. An amorphous solid softens over a range of temperatures.
Cleavage. A crystal splits along flat planes when cut. An amorphous solid breaks with curved, irregular surfaces.
Direction. A crystal is anisotropic: its properties, such as the speed of light or the electrical conductivity, change with the direction in the crystal. An amorphous solid is isotropic: the same in every direction.
Heat of fusion. A crystal has a definite enthalpy of fusion. An amorphous solid has none.
Some older books call an amorphous solid a "supercooled liquid" or a "pseudo solid". Today glass is described as an amorphous solid, not a liquid. The old story that window panes flow and grow thicker at the bottom is not true: the thick edges came from the way the glass was made. An amorphous solid can turn crystalline when it is heated for a long time. Old glass can become milky for this reason.
Four kinds of crystalline solid
We sort crystals by the particles and the forces that hold them:
Molecular solids. Molecules held by intermolecular forces. Nonpolar ones such as argon, iodine and solid CO2 are held by dispersion forces. Polar ones such as solid HCl and SO2 add dipole-dipole forces. Ice is held by hydrogen bonds. These solids are soft, melt low and do not conduct.
Ionic solids. Positive and negative ions held by strong electrostatic forces, as in NaCl and MgO. They are hard and brittle and melt high. They conduct when molten or dissolved, but not as solids, because the ions cannot move.
Metallic solids. Positive metal ions in a sea of electrons that move freely. They conduct heat and electricity, and they can be hammered into sheets (malleable) and drawn into wire (ductile).
Covalent network solids. Atoms joined by covalent bonds through the whole crystal, as in diamond, silicon carbide and quartz, SiO2. They are very hard, melt very high and do not conduct. Graphite is the exception: its layers have electrons that move, so it conducts along the layers.
Lattice and unit cell
A crystal is a huge pattern. To describe it, we replace each repeating particle or group by a point. The array of points is the crystal lattice, and each point is a lattice point. A lattice looks the same from every one of its points.
The smallest part of the lattice that builds the whole crystal when it is repeated in three directions is the unit cell. Think of a wall of bricks: one brick and the way it repeats give the whole wall. A unit cell has six parameters: the three edge lengths a, b and c, and the three angles between the edges, α (between b and c), β (between a and c) and γ (between a and b).
A primitive unit cell has lattice points only at its corners. A centred unit cell has points at other places as well:
body-centred: one more point at the centre of the cell;
face-centred: one more point at the centre of each face;
end-centred: one more point at the centres of two opposite faces only.
Books differ in the names. An end-centred cell is also called base-centred or C-centred. A primitive cubic cell is also called simple cubic. American books spell it "body-centered".
The seven crystal systems and the fourteen lattices
Every crystal belongs to one of seven systems, set by its edges and angles. Here they are, with the lattices each system allows:
Triclinic: a=b=c, no angle 90∘. Primitive (1). Examples: K2Cr2O7, CuSO4⋅5H2O.
The counts add up to 3+2+4+1+1+2+1=14. These fourteen are the Bravais lattices, after Auguste Bravais, who showed in 1848 that there are no others. Why is there no face-centred tetragonal lattice? Draw two face-centred tetragonal cells side by side. A smaller cell, turned by 45∘, is body-centred tetragonal. So it is not a new lattice. In the same way an end-centred cubic cell would break the cubic symmetry, so it cannot be cubic.
Counting the atoms in a unit cell
An atom on a corner of a cubic cell is shared by the 8 cells that meet at that corner. Only 81 of it belongs to our cell. In the same way:
a corner atom counts 81;
an atom at the centre of an edge counts 41, since 4 cells share an edge;
an atom at the centre of a face counts 21;
an atom inside the cell counts 1.
So the three cubic cells hold:
simple cubic: 8×81=1 atom;
body-centred cubic (bcc): 8×81+1=2 atoms;
face-centred cubic (fcc): 8×81+6×21=4 atoms.
We write the number of atoms per cell as Z.
Three cubes side by side, drawn in perspective, each with its lattice points as blue spheres. The first is simple cubic: one sphere at each of the 8 corners, 1 atom per cell. The second is body-centred cubic: the 8 corners and one orange sphere at the centre of the cube, 2 atoms per cell. The third is face-centred cubic: the 8 corners and one green sphere at the centre of each of the 6 faces, 4 atoms per cell.
The same counting gives the formula of a compound. Atoms A sit at the corners of a cube and atoms B at the face centres. A gives 8×81=1 and B gives 6×21=3, so the formula is AB3. Now suppose the B atoms on the top and bottom faces are missing. B gives 4×21=2, and the formula becomes AB2.
The rule of 81 for a corner is for a cube or any cell with 90∘ angles. In a hexagonal prism a corner atom is shared by 6 prisms, so it counts 61. We use this for hcp in lesson 3.
Start at fcc: 8 corners and 6 faces give 4. Now set the face atoms to 0 and the inside atoms to 1. You get bcc, with 2.
Practise with new numbers
Try it in Python
The program counts the atoms of each kind in a cell from the sites they sit on. Then it writes the formula in its smallest whole numbers.
Common mistakes
Counting every atom as whole. Most atoms of a cell are shared. Count corners as 81, edges as 41 and faces as 21.
Saying an amorphous solid has no order. It has short-range order. It lacks only the long-range order.
Calling graphite an insulator. It is a covalent network solid, but it conducts along its layers.
Thinking there are seven lattices. There are seven crystal systems and fourteen Bravais lattices.
Using 81 for a corner of a hexagonal prism. Six prisms meet there, so a corner counts 61.
Remember these
Crystalline: long-range order, sharp melting point, anisotropic. Amorphous: short-range order only, softens over a range, isotropic.
Four kinds of crystal: molecular, ionic, metallic and covalent network.
A unit cell has six parameters: a, b, c, α, β, γ.
Seven crystal systems, fourteen Bravais lattices.
Shares: corner 81, edge 41, face 21, inside 1. So Z=1 (simple cubic), 2 (bcc), 4 (fcc).
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Quartz glass and a quartz crystal have the same formula, SiO2. Which one melts sharply, and why?
A crystal has a=b=c and α=β=γ=75∘. Which crystal system is it?
Atoms X sit at the corners of a cube, atoms Y at the body centre and atoms Z at the face centres. What is the formula?
Solid CO2 melts low and does not conduct. Silicon carbide melts above 2700∘C and does not conduct. Name the kind of solid each one is.
Why does the list of lattices have no face-centred tetragonal lattice?
References
OpenStax, Chemistry 2e, Chapter 10, section 10.5 (The Solid State of Matter) and section 10.6 (Lattice Structures in Crystalline Solids).
NCERT, Chemistry Part I for Class XII, Unit 1 (The Solid State), in the editions before the rationalised book of 2023.
Enroll free in Crystal Lattices, Unit Cells and Close Packing
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.