Sodium hydroxide, sodium carbonate and sodium hydrogencarbonate
Soap, paper, glass and baking all need sodium compounds. This lesson follows three of them from common salt: sodium hydroxide from the electrolysis of brine, sodium carbonate from the Solvay process, and sodium hydrogencarbonate, the baking soda in a kitchen.
about 25 min1 simulation1 practice question
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Common salt: where it starts
Sodium chloride comes from sea water, by evaporation in the sun, and from rock salt mines. Crude salt holds calcium sulphate, calcium chloride and magnesium chloride. The chlorides of calcium and magnesium take up water from the air, so crude salt gets damp.
How is it purified? A saturated solution is made, the insoluble matter is filtered off, and hydrogen chloride gas is passed in. The chloride ion is a common ion. It pushes the solubility equilibrium back, so pure sodium chloride crystallises out. The more soluble chlorides of calcium and magnesium stay in solution.
Sodium hydroxide: the chlor-alkali industry
Sodium hydroxide is made by the electrolysis of brine. Chlorine forms at the anode and hydrogen and hydroxide ions at the cathode:
2Cl−→Cl2+2e− and 2H2O+2e−→H2+2OH−
The two products must be kept apart, because chlorine reacts with sodium hydroxide.
The Castner–Kellner cell used a flowing mercury cathode. Sodium ions were discharged into the mercury as an amalgam, Na++e−→Na-amalgam. The amalgam then flowed to another tank and reacted with water:
2Na-amalgam+2H2O→2NaOH+2Hg+H2
Mercury lost from these plants polluted rivers and the sea. Most plants now use a membrane cell. A sheet of ion-exchange polymer lets sodium ions pass from the anode side to the cathode side, but stops chloride ions and chlorine.
Properties. Sodium hydroxide is a white, translucent solid that melts at about 591 K. It is deliquescent: it takes in so much water from the air that it dissolves in it. It also takes in carbon dioxide and turns into sodium carbonate on its surface:
2NaOH+CO2→Na2CO3+H2O
So a sodium hydroxide solution changes its strength on standing, and a careful analyst checks it against a standard acid before use.
Uses. Making soap, paper, artificial silk and many chemicals; refining petroleum; purifying bauxite for aluminium; as a laboratory reagent.
Sodium carbonate: the Solvay process
Sodium carbonate is sold as soda ash (Na2CO3) or as washing soda (Na2CO3⋅10H2O). Most of it is made by the Solvay process, also called the ammonia-soda process.
A flow chart of the Solvay process. Brine saturated with ammonia goes into a carbonating tower, where carbon dioxide is bubbled in. Sodium hydrogencarbonate precipitates and is filtered off. It is heated to give sodium carbonate, and the carbon dioxide from this step goes back to the tower. Limestone is heated in a kiln to give carbon dioxide (to the tower) and quicklime. The quicklime is slaked to calcium hydroxide, which is heated with the ammonium chloride solution from the filter. Ammonia goes back to the start, and calcium chloride leaves as the by-product.
Brine is saturated with ammonia. Carbon dioxide is passed in. Ammonium hydrogencarbonate forms in the solution: NH3+H2O+CO2→NH4HCO3.
Sodium hydrogencarbonate is only sparingly soluble in this cold solution, so it precipitates: NaCl+NH4HCO3→NaHCO3+NH4Cl.
The solid is filtered off and heated. It gives sodium carbonate, and the carbon dioxide is used again: 2NaHCO3→Na2CO3+CO2+H2O.
Limestone is heated in a kiln to supply carbon dioxide: CaCO3→CaO+CO2. The quicklime is slaked: CaO+H2O→Ca(OH)2.
The ammonia is recovered from the ammonium chloride solution: 2NH4Cl+Ca(OH)2→2NH3+CaCl2+2H2O.
Add these up, and the ammonia and carbon dioxide cancel out. The overall change is
2NaCl+CaCO3→Na2CO3+CaCl2
The only by-product is calcium chloride. Ammonia is costly, so the plant must get almost all of it back.
Why can potassium carbonate not be made this way? Potassium hydrogencarbonate is too soluble to precipitate in step 2. The whole process depends on the low solubility of the sodium salt.
Properties. Washing soda crystals lose water in air. This is called efflorescence: Na2CO3⋅10H2O→Na2CO3⋅H2O+9H2O. Above 373 K the monohydrate becomes anhydrous soda ash. A solution of sodium carbonate is alkaline, because the carbonate ion takes a proton from water:
CO32−+H2O⇌HCO3−+OH−
Uses. Softening water, laundering and cleaning; making glass, soap, borax and caustic soda. In the old method of making caustic soda, it was heated with slaked lime: Na2CO3+Ca(OH)2→2NaOH+CaCO3.
Sodium hydrogencarbonate: baking soda
Sodium hydrogencarbonate is made by passing carbon dioxide into a solution of sodium carbonate. The less soluble hydrogencarbonate separates:
Na2CO3+H2O+CO2→2NaHCO3
On heating it gives off carbon dioxide, which makes a cake rise. A baking powder contains a weak acid too, so the gas comes off even without strong heat, and no bitter sodium carbonate is left. Sodium hydrogencarbonate is also a mild antiseptic for the skin, an antacid, and the powder in some fire extinguishers.
Set the conversion to 100 %. The salt needed for 1 t is 1.10t. At 75 % it rises to 1.47t.
Practise with new numbers
Try it in Python
The program works out the salt and limestone needed, and the calcium chloride made, for one tonne of sodium carbonate.
Common mistakes
Writing ammonia as used up in the Solvay process. It is recycled. The overall change uses only salt and limestone.
Thinking sodium carbonate precipitates in the tower. Sodium hydrogencarbonate does, because it is less soluble.
Leaving sodium hydroxide open to the air. It takes in water and carbon dioxide.
Calling a carbonate solution neutral. It is alkaline, from hydrolysis of the carbonate ion.
Remember these
Sodium hydroxide: electrolysis of brine. Mercury (Castner–Kellner) cells are being replaced by membrane cells.
Solvay: ammoniated brine plus carbon dioxide gives NaHCO3; heating gives Na2CO3; ammonia recovered with slaked lime.
Overall: 2NaCl+CaCO3→Na2CO3+CaCl2.
Baking soda: 2NaHCO3→Na2CO3+H2O+CO2 on heating.
References
OpenStax Chemistry 2e, Chapter 18, section 18.2, and Chapter 17, section 17.7 on electrolysis.
Greenwood and Earnshaw, Chemistry of the Elements, Chapter 4, Lithium, Sodium, Potassium, Rubidium, Caesium and Francium (the alkali industry).
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Why is hydrogen chloride gas passed into a saturated solution of crude salt?
In the Solvay process, which compound precipitates in the carbonating tower, and why?
Why is a solution of washing soda alkaline?
Write the overall equation of the Solvay process.
Enroll free in Compounds of Sodium and Calcium, and the s-Block in Living Things
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.