Colloids: their classes, preparation and purification
Stir salt into water and it vanishes. Stir sand into water and it settles. Stir a little starch into hot water, and you get something in between: cloudy, but it never settles. That in-between state is a colloid. This lesson sorts colloids into their classes and shows how they are made and cleaned.
about 30 min1 simulation1 practice question
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Between a solution and a suspension
What decides whether a mixture is a solution, a colloid or a suspension? The size of the particles.
In a true solution, the particles are single molecules or ions, smaller than about 1nm. The mixture is clear, and the particles pass through filter paper and through a membrane such as parchment.
In a suspension, the particles are larger than about 1000nm. They settle under gravity and are held back by filter paper.
In a colloid, the particles are between about 1nm and 1000nm. They pass through filter paper but not through parchment, and they do not settle.
A size scale with a logarithmic axis from 0.1 nanometre to 100 000 nanometres. Below 1 nanometre: true solution, with examples of a sugar molecule and a sodium ion. From 1 to 1000 nanometres: colloid, with examples of a gold sol particle, a protein molecule and a fat droplet in milk. Above 1000 nanometres: suspension, with examples of sand in water and chalk powder.
The size limits are not sharp. IUPAC gives the same range, 1nm to 1μm, for a colloid. A colloid is a state of a substance, not a kind of substance. Sodium chloride dissolves in water as ions, but in benzene it can be made into a colloid.
A colloid has two parts:
the dispersed phase, the substance spread out as tiny particles;
the dispersion medium, the substance in which they are spread.
The types of colloid by phase
Either part can be a solid, a liquid or a gas. Two gases always mix to a true solution, so there are eight types.
Solid in gas (aerosol): smoke, dust.
Liquid in gas (aerosol): fog, mist, cloud.
Gas in liquid (foam): soap lather, whipped cream.
Liquid in liquid (emulsion): milk, hair cream.
Solid in liquid (sol): paints, starch in water, gold sol.
Gas in solid (solid foam): pumice stone, foam rubber.
Liquid in solid (gel): cheese, jellies.
Solid in solid (solid sol): coloured glass, some gem stones.
A colloid with a liquid medium is a sol. With water as the medium it is a hydrosol, and with alcohol an alcosol.
Lyophilic and lyophobic sols
The word "lyo" means solvent, "philic" means loving and "phobic" means hating.
Lyophilic sols form when the substance is simply mixed with the medium, because the particles attract the medium strongly. Starch, gum, gelatin and proteins in water are lyophilic. They are reversible: dry the sol, add water again, and the sol forms again. They are stable, because each particle carries a shell of solvent molecules.
Lyophobic sols do not form by simple mixing. Metals, metal sulphides and metal hydroxides in water need special methods. They are irreversible and less stable: a small amount of electrolyte makes them settle. Only the charge on the particles keeps them apart.
Three kinds of colloid particle
Multimolecular colloids. Many small atoms or molecules group together into a particle of colloidal size. A gold sol holds particles of many gold atoms, and a sulphur sol holds particles of many S8 molecules.
Macromolecular colloids. One large molecule is already of colloidal size. Starch, cellulose, proteins, enzymes and synthetic polymers such as nylon form these. They are usually lyophilic.
Associated colloids (micelles). Some substances are strong electrolytes at low concentration but group into particles at higher concentration. Soaps and detergents do this. Lesson 3 is about them.
Making a lyophobic sol
Chemical methods. A reaction makes a product that is insoluble, in very small particles.
Reduction: a gold salt reduced with methanal or tin(II) chloride gives a red gold sol.
Hydrolysis: drop iron(III) chloride into boiling water. FeCl3+3H2O→Fe(OH)3(sol)+3HCl
Electrical disintegration (Bredig's arc). An electric arc is struck between two metal electrodes held under water, with a trace of potassium hydroxide as a stabiliser. The metal vaporises and condenses into colloidal particles. Sols of gold, silver and platinum are made this way.
Peptisation. A freshly made precipitate is turned into a sol by shaking it with a little electrolyte. Fresh iron(III) hydroxide, shaken with a little iron(III) chloride, gives a reddish brown sol. The precipitate adsorbs Fe3+ ions, the particles become positive, they repel each other, and they break away.
A huge surface in a small mass
Colloidal particles are tiny, so a small mass holds a vast number of them, with a very large total surface. For spheres of diameter d and density ρ, a mass m has a total surface
A=ρd6m
Move d from 200 nm to 2 nm. The number of particles grows a million times, and the total surface a hundred times. Surface effects, such as adsorbing ions, matter a great deal in a colloid.
Practise with new numbers
Cleaning a sol: dialysis and ultrafiltration
A sol made by a reaction holds left-over electrolytes, such as the hydrochloric acid from the hydrolysis of iron(III) chloride. Too much electrolyte would make the sol settle, so it is removed.
Dialysis. The sol is put in a bag of parchment or cellophane, a membrane with pores large enough for ions but too small for colloidal particles. The bag hangs in running water. The ions diffuse out, and the colloid stays inside.
Electrodialysis. An electric field across the membrane drives the ions out faster. It works only when the impurity is an electrolyte.
Ultrafiltration. A filter paper soaked in collodion has pores too small for colloidal particles. Pressure or suction pushes the medium and the ions through it.
If the outer water is changed in steps, each change spreads the salt over the inner and outer volumes. With Vs of sol and Vw of water, the salt left falls by the factor Vs+VwVs each time.
Try it in Python
The program sorts five particle sizes into true solution, colloid and suspension, and counts the particles in 1.00 mg of gold for each size.
Common mistakes
Thinking a colloid is a kind of substance. It is a state of division. The same substance can be a solution in one medium and a colloid in another.
Calling every sol lyophobic. Starch, gum and gelatin form lyophilic sols by simple mixing.
Saying colloid particles pass through parchment. They pass through filter paper but not through parchment.
Mixing up peptisation and coagulation. Peptisation turns a precipitate into a sol. Coagulation turns a sol into a precipitate.
Remember these
Size: solution below about 1nm, colloid about 1 to 1000nm, suspension above.