How should the ends of a generator's coil be joined to the outside circuit to give an alternating…
Contributed by StemPy LabTry it on paper first. A hint, the key idea and the worked solution are here when you need them.
- How should the ends of a generator's coil be joined to the outside circuit to give an alternating current, and to give a direct current?
- How do the graphs of the two currents look?
- The coil of a DC generator turns times a second. How many humps does its graph show each second?
Need a reminder? The key ideaShow
A generator turns a coil in a magnetic field. With slip rings it gives alternating current (AC), which changes direction twice in every turn; with a split ring it gives a pulsing direct current (DC). Frequency = turns each second, in hertz; one cycle takes .
The worked solution
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. (a) For AC, the ends go to two complete slip rings. For DC, they go to the two halves of a split ring, which swaps the connections every half turn.
Step 2. (b) AC is a wave above and below zero. DC from a split ring is a row of humps, all above zero.
Step 3. (c) One hump each half turn: humps a second.
Answer: slip rings for AC, a split ring for DC; a wave, and humps; humps each second.
Check. The split ring turns every downward half of the wave into an upward hump, so the humps come twice as often as the turns.
Discussion (0)
Log in to join the discussion.
Loading…