Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A tonne of bauxite holds 55.0 % alumina, , and 6.0 % silica, . In the Bayer digestion all the silica dissolves and then comes out again as an insoluble sodium aluminium silicate. Take its formula as . This solid carries alumina and sodium with it into the red mud. Use Al = 27, Si = 28, Na = 23, O = 16 and H = 1 in g/mol. Find the alumina lost, the sodium hydroxide lost (as NaOH), and the aluminium that the rest of the alumina can give.
For a flotation circuit with metal percentages (feed), (concentrate) and (tailings): mass of concentrate feed , and recovery . Bayer process: . Cyanide process: , then .
Check an answer or open a hint to unlock the worked solution.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. Silica. .
Step 2. Alumina lost. One alumina for two silica: .
Step 3. Sodium hydroxide lost. One for two silica, so of , which is of NaOH, or .
Step 4. Aluminium. Alumina left: . Aluminium: .
Answer: , and .
Check. Without the silica the tonne would give of aluminium. Six percent of silica costs about a tenth of the metal. That is why plants prefer bauxite low in reactive silica.
Log in to join the discussion.
Loading…