Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A thin-layer plate is run with a mixture M and two pure references, A and B, side by side on one baseline. The solvent front ends 8.0 cm above the baseline. M gives two spots, whose centres are 2.4 cm and 5.6 cm above the baseline. A gives one spot at 2.4 cm and B one spot at 4.0 cm. Find the Rf of each spot of M and the Rf of B. Then count how many compounds M holds, and say which reference M contains.
, from the baseline. In gas chromatography the amount of each compound is proportional to its peak area divided by its response factor. Lowering of the melting point: , with .
Check an answer or open a hint to unlock the worked solution.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. M. Lower spot: . Upper spot: .
Step 2. B. .
Step 3. Compare. The lower spot of M matches A, at 0.30. The upper spot, at 0.70, matches neither reference.
Answer: , and . M holds 2 compounds. It contains A, but not B. The second compound is not one of the references.
Watch out. Two compounds can share an Rf in one solvent. To be sure the lower spot is A, run a second plate in another solvent, or use two-way chromatography.
Log in to join the discussion.
Loading…