Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A student knocks over a small beaker and spills 20.0 cm³ of 18.0 mol/dm³ sulphuric acid on the bench. The safety sheet says to cover it with solid sodium hydrogencarbonate, (84 g/mol). Take the molar volume of a gas at room conditions as . Find the amount of acid spilled, the least mass of sodium hydrogencarbonate that neutralises it, and the volume of carbon dioxide given off. Then say why sodium hydroxide pellets are not used instead.
Check an answer or open a hint to unlock the worked solution.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. Acid. .
Step 2. Sodium hydrogencarbonate. , and .
Step 3. Carbon dioxide. .
Answer: , and .
Why not sodium hydroxide? It is corrosive itself, and it reacts with the acid with a large release of heat. Sodium hydrogencarbonate is a weak base, safe to handle, and an excess does no harm. The fizzing also shows when the acid is used up.
Watch out. Seventeen litres of gas is a lot of froth. Add the solid from the edges inwards, slowly.
Log in to join the discussion.
Loading…
Molarity of a concentrated acid: , with the mass fraction and the density in g/cm³. Dilution: . Add acid to water. Sodium hydrogencarbonate neutralises an acid spill: .