Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A small metal sphere of radius is used to charge a large metal sphere of radius , which stands on an insulating support. The large sphere starts uncharged. One cycle has two steps, as in the figure.
Step 1. The small sphere is joined by a thin wire to a supply that holds it at . The other terminal of the supply is earthed. Then the wire is removed.
Step 2. The small sphere is joined to the large sphere by a long thin wire, and the charges settle. Then that wire is removed.
The two spheres are always far apart, and far from everything else, so each behaves as an isolated sphere. Potentials are measured from zero at infinity. Ignore the charge on the wires. Take .
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Plan. Each sphere is a capacitor to infinity, with . Follow the charge cycle by cycle, then find the limit and use energy for the heat.
Step 1. One charging (a). .
Step 2. One sharing (b). Joined, the spheres reach one potential, so the charge divides in the ratio . The large sphere keeps of it: .
Step 3. The rule (c). . Its steady value is , and . After two cycles , so .
Step 4. The limit (d). . This makes sense: once the large sphere is at , sharing moves no more charge.
Step 5. Cycles (e). We need , so . The first whole number is .
Step 6. Heat (f). In the end both spheres sit at . The supply has sent out all the charge they hold, , and done work . They store only half of that, . The other half is heat, made in both steps of every cycle: in the supply's wire while the small sphere is topped up, and in the long wire while the charge is shared. In all it is .
Answer: (a) . (b) . (c) . (d) . (e) . (f) .
Watch out. The large sphere can never pass the potential of the supply, however many times charge is carried to it. The half lost as heat does not depend on the resistance of the wires.
Log in to join the discussion.
Loading…