Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A fermenter makes penicillin with a fungus. The control panel shows the readings below. The targets are 37 degrees C, pH 7.0 and 6 mg of dissolved oxygen in each dm3 of liquid.
| Condition | Reading | Target |
|---|---|---|
| Temperature (degrees C) | 41 | 37 |
| pH | 6.2 | 7.0 |
| Oxygen (mg per dm3) | 2 | 6 |
Pectinase breaks down pectin, so there is more juice. A biological washing powder has enzymes (protease, lipase, amylase) that work at moderate temperatures and are denatured when it is hot. Lactase breaks lactose into glucose and galactose. A fermenter controls temperature, pH, oxygen, nutrient supply and waste products.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Given. The three readings and targets.
Step 1. (a) Temperature: degrees C too high.
Step 2. (b) pH: too low.
Step 3. (c) Oxygen: mg per dm3 too low.
Step 4. (d) The temperature is too high, so the operator should increase the cooling water, because the enzymes of the fungus may be denatured. The pH is too low, so the operator should add alkali, because enzymes work best at one pH. The oxygen is too low, so the operator should bubble in more sterile air or stir faster, because the fungus needs oxygen for aerobic respiration.
Answer: 4 degrees C; 0.8; 4 mg per dm3; cool more, add alkali, add more air.
Watch out. The fungus gives out heat when it respires. So the temperature rises, and the cooling has to go on.
Log in to join the discussion.
Loading…