Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A conical funnel stands with its vertex pointing down, directly above an empty cylindrical jar, as in the figure. The funnel is deep, and the radius of its rim is . The jar is a cylinder with an inner radius of , standing upright on a level table. Water drains out through a small hole at the vertex of the funnel and falls straight into the jar, so no water is lost on the way.
At one moment the water in the funnel is deep, and its level is falling at . Treat the water surfaces as flat and the walls as thin. Take from your calculator wherever an answer needs a decimal, and keep units on every answer.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Set-up. At depth the water in the funnel is a small cone similar to the funnel, so and . Its volume is , and .
(a) With and : . Water leaves at .
(b) The jar's water has volume at depth , and gains water at the rate the funnel loses it: , so .
(c) , so : the radius shrinks at .
(d) The surface has area , so . It shrinks at .
(e) Now , so and . The level falls faster as the funnel empties, because the same volume per second comes from a smaller surface.
Check. Stepping the depth down by for a microsecond and recomputing the volumes and the area gives the same rates to six figures.
Watch out. Differentiating as if stayed at gives only a third of the true rate, about . The radius of the water surface changes with the depth, so write in terms of alone before differentiating.
Log in to join the discussion.
Loading…