A brief note on Moments and Centre of Gravity. It covers the moment of a force, the principle of moments, equilibrium, the centre of gravity and stability, with a worked example and questions to check yourself.
A brief note on Moments and Centre of Gravity. Read it before a test. Try each question at the end before you open its answer.
The moment of a force
Turning effect: a force can turn an object about a pivot. Examples: a door, a spanner, a see-saw.
Moment = force × perpendicular distance from the pivot. M=Fd, in N m.
A moment is clockwise or anticlockwise.
Extended: a force at an angle α to a spanner of length L has d=Lsinα.
The principle of moments
Balanced object: the clockwise moments equal the anticlockwise moments about the same pivot.
Equilibrium: no resultant force and no resultant moment.
Extended: the principle holds with several forces on each side. The pivot pushes up with a force equal to the total downward force.
Extended experiment: balance a metre rule at its middle, hang weights and compare F×d on both sides.
Centre of gravity and stability
Centre of gravity: the point through which the whole weight can be considered to act.
Irregular lamina: hang it from a pin at several holes, mark the plumb line each time, and find where the lines cross.
A lower centre of gravity and a wider base make an object more stable.
An object topples when the vertical line from its centre of gravity falls outside its base.
A worked example
A force of 50 N acts at right angles on a spanner 0.30 m long. A beam is balanced with 36 N at 0.50 m on the left. What is the moment, and what force at 0.30 m on the right balances the beam?
Moment.M=Fd=50×0.30=15N m.
Balance.F2=0.3036×0.50=60N.
Check yourself
State the principle of moments.
Why is a bus with a heavy load on its roof less stable?
How do you find the centre of gravity of an irregular lamina?
Sources
Cambridge IGCSE Physics 0625 syllabus, sections 1.5.2 and 1.5.3.