Gases and the kelvin scale · Physics Class 9–10 | StemPy Lab
Course 10.1·Lesson 3 of 3
Gases and the kelvin scale
Heat a sealed gas and its pressure rises. Squeeze it into a smaller space and the pressure also rises. Both facts follow from the motion of the particles. The kelvin scale starts at absolute zero, and for a fixed mass of gas at a constant temperature the pressure times the volume stays the same.
about 30 min1 simulation2 practice questions1 Python program5 questions to check yourself
This lesson is free to read. Enroll free to keep your place in the course.
Lesson 3 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
What changes the pressure of a gas?
Pump up a bicycle tyre. The tyre pushes back harder as you pump. Leave a sealed can of gas in the sun, and the pressure inside rises. Two things change the pressure of a fixed mass of gas: the temperature and the volume.
A change of temperature at constant volume. The gas is in a sealed container, so the volume cannot change. Heat the gas. The particles move faster. They hit the walls harder and more often. The pressure goes up. Cool the gas, and the pressure goes down.
A change of volume at constant temperature. Push in a piston so the volume gets smaller. The particles move at the same speed, because the temperature has not changed. But they now have less room, so they hit the walls more often in each second. The pressure goes up. Pull the piston out, and the pressure goes down.
The kelvin scale
The Celsius scale is built on the freezing and boiling points of water. The Chemistry chapter Matter in Our Surroundings also uses the kelvin scale. Here we use it for gases. The kelvin scale starts at absolute zero, the lowest possible temperature. Absolute zero is 0K (read as zero kelvin) and also −273∘C.
A change of one kelvin is the same size as a change of one degree Celsius. To convert, we use
T=θ+273
Here T is the temperature in kelvin (K) and θ (the Greek letter theta) is the temperature in degrees Celsius. To change kelvin back to Celsius, we want θ, so θ=T−273.
Place
Celsius, θ
Kelvin, T
Absolute zero
−273∘C
0K
Water freezes
0∘C
273K
A room
20∘C
293K
Water boils
100∘C
373K
A kelvin temperature is never negative. If a calculation gives a negative kelvin temperature, something is wrong.
A worked example. Change these to kelvin.
−196∘C is 77K.
0∘C is 273K.
37∘C is 310K.
100∘C is 373K.
For the first one, T=θ+273=−196+273=77. This is the temperature of liquid nitrogen.
Extended: pressure and volume
Extended: for a fixed mass of gas at a constant temperature, the pressure times the volume stays the same:
pV=constant
So if a gas starts with pressure p1 and volume V1 and ends with pressure p2 and volume V2, then
p1V1=p2V2
If we want p2, then p2=V2p1V1. Use the same unit for the two volumes, and the same for the two pressures. Halve the volume, and the pressure doubles.
Two graphs for a fixed mass of gas at constant temperature. The left graph shows pressure on the vertical axis against volume on the horizontal axis. It is a smooth curve that falls steeply at small volume and flattens at large volume. The right graph shows pressure against one over the volume. It is a straight line that rises and, when extended with a dashed line, passes through the origin.
The left graph is a curve. The right graph is a straight line through the origin, because p is in proportion to 1/V. Straight-line graphs are easier to test.
Make the new volume half of the starting volume. The red point moves to double the pressure. All points stay on one curve.
A worked example. A fixed mass of gas has a pressure of 120 kPa and a volume of 50 cm³. The volume is changed to 30 cm³ at constant temperature.
The constant.pV=120kPa×50cm3=6000kPa cm3.
The new pressure. We want p2, so p2=V2p1V1=30cm36000kPa cm3=200kPa.
The check. The volume is smaller, so the pressure must be bigger. It is: 200 kPa is bigger than 120 kPa.
A note for later. At a constant volume the pressure is in proportion to the kelvin temperature. This is met in Class 11-12 Physics, in the chapter on kinetic theory. For this course we only need to know that a hotter gas has a higher pressure.
Practise with new numbers
Try it in Python
The program uses pV=constant to list the pressure for six volumes. It also converts five temperatures to kelvin.
Common mistakes
Adding 273 twice, or subtracting when you should add. To go to kelvin, add 273. To come back, subtract 273.
Writing a degree sign with kelvin. The unit is kelvin, K, not degrees kelvin.
Saying the particles get faster when the volume is made smaller. Their speed depends only on the temperature. They hit the walls more often because there is less room.
Mixing units in p1V1=p2V2. Use the same unit for the two volumes and the same unit for the two pressures.
Using the law for a gas that is also being heated. The law needs the temperature and the mass of the gas to stay the same.
Remember these
Hotter gas at a constant volume: faster particles hit the walls harder and more often, so the pressure rises.
Smaller volume at a constant temperature: the particles hit the walls more often, so the pressure rises.
T(K)=θ(∘C)+273. Absolute zero is 0K=−273∘C.
Extended:pV=constant and p1V1=p2V2 for a fixed mass of gas at constant temperature. The graph of p against V is a curve, and the graph of p against 1/V is a straight line through the origin.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Explain, using particles, why the pressure of a sealed gas goes up when it is heated.
Change −40∘C and 127∘C to kelvin.
Extended. A gas at 200 kPa has a volume of 24 cm³. It expands to 80 cm³ at a constant temperature. What is the new pressure?
Why can a temperature on the kelvin scale never be negative?
References
Cambridge IGCSE Physics 0625 syllabus, section 2.1.3: gases and the absolute scale of temperature.
OpenStax, College Physics 2e, Chapter 13 (Temperature, Kinetic Theory, and the Gas Laws): the gas laws and the kelvin scale.
Enroll free in The Particle Model and Gases
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Count the course towards the certificate for its chapter.