Course 11.3Lesson 2 of 3
The half-life of an isotope is the time taken for half the nuclei in any sample to decay. The count rate of a sample halves in each half-life. We use tables and decay curves to find a half-life. Extended: the background count rate must be taken away before we look for the time that the count rate takes to halve.
This lesson is free to read. Enroll free to keep your place in the course.
Try the code and the simulations beside the lesson.
A glow-in-the-dark watch glows brightly at first and then more and more dimly. A radioactive sample does the same. Its radiation fades, but it never reaches zero in a neat final moment. There is a regular pattern to how it fades. The pattern is the half-life.
The half-life of an isotope is the time taken for half the nuclei of that isotope in any sample to decay.
Say a sample has radioactive nuclei. After one half-life, are left. After two half-lives, . After three, . Each half-life, the number left is halved again.
The same idea works for the count rate. The count rate of the sample is in proportion to the number of nuclei that are left. So the count rate halves in each half-life. In the graph the corrected count rate falls from to counts/s in minutes, and from to counts/s in the next minutes. The half-life is minutes.
Half-lives are very different for different isotopes. Some are small fractions of a second. Others are billions of years.
| Isotope | Radiation | Half-life |
|---|---|---|
| Technetium-99m | gamma | hours |
| Iodine-131 | beta and gamma | days |
| Cobalt-60 | beta and gamma | years |
| Americium-241 | alpha | years |
| Carbon-14 | beta | years |
Keep minutes. Slide the time to , , and minutes. The count rate falls to half, then half again, each time. Now change the half-life to minutes. The same fall takes twice as long.
To find how much is left after a time :
A worked example. A sample of an isotope has a half-life of days. At the start the count rate is counts/min. What is the count rate after days?
To find the half-life from a table of readings, look for the time that the count rate takes to halve. For the readings counts/min at , , and minutes, the half-life is minutes.
A counter always adds the background. So the measured count rate does not halve in each half-life. A measured rate of counts/min falls to counts/min in one half-life, and not to counts/min.
The rule is to subtract the background first. The graph of the measured count rate does not fall to zero. It levels off at the background count rate.
An example. The background is counts/min. The measured readings at , , and hours are , , and counts/min.
The program takes the readings of the example above, subtracts the background and finds the half-life.
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Every lesson is open to read. Enrolling also lets you:
Log in to join the discussion.
Loading…