A body is shortest when it moves: L=L0/γ, along the motion only, where L0
Lesson 3 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
The muon's point of view
Go back to the muon of the last lesson. On the Earth we said: its clock runs slow, so it lives long enough to cross the air. But in the muon's own frame its clock is fine. It lives 2.2μs on average. How does it reach the ground?
In the muon's frame the Earth rushes up at 0.998c. The only way out is that the thickness of the air is smaller in the muon's frame. Take 10.0km of air, measured on the Earth. In the muon's frame it is
L=15.810.0km
L=632m
The muon crosses this at 0.998c in
t=2.994×108m/s632m
t=2.11μs
The Earth's account agrees. The Earth says the trip takes 33.4μs, and the muon's slow clock shows 33.4μs/15.8=2.11μs.
Length contraction
The proper lengthL0 of a body is its length in the frame where it is at rest. In a frame where it moves along its length, its length is
L=γL0
This is length contraction. The proper length is the longest length that any observer measures. To measure a moving rod, we must mark both ends at the same time in our frame. The two marks are made by two observers, and this is where the next idea comes in.
Only lengths along the motion shrink. Imagine two pipes of the same diameter, one at rest and one moving along its axis. If the moving pipe were thinner, it would slide inside the other. In the moving pipe's frame the other pipe would be thinner, and slide inside instead. The two frames cannot both be right about which pipe is inside, so neither pipe is thinner. Widths across the motion do not change.
Worked example: a rocket at 0.8c
A rocket of proper length 50m flies past a station at 0.8c.
The factor.γ=1/1−0.64=1/0.6=1.667.
The length.L=50m/1.667=30m.
The width. Unchanged, whatever it is.
Simultaneity depends on the frame
Einstein's train shows the deepest idea of the chapter. A lamp hangs at the middle of a carriage of proper length L0. It flashes once.
Two drawings of a railway carriage with a lamp at its middle, one above the other. In the top drawing, labelled in the frame of the carriage, two light pulses leave the lamp and reach the rear wall and the front wall at the same moment. In the bottom drawing, labelled in the frame of the ground, the carriage moves to the right with speed v. The rear wall moves towards its pulse and is reached first, marked 1. The front wall moves away from its pulse and is reached later, marked 2. A dashed outline shows where the carriage was when the lamp flashed.
In the carriage. The light goes L0/2 to each end at speed c. It reaches the rear wall and the front wall at the same time.
On the ground. The carriage moves at v. The light still goes at c both ways, by the second postulate. The rear wall moves towards its pulse, and the front wall moves away. So the light reaches the rear wall first.
Two events at the same time in one frame are not at the same time in another frame. This is the relativity of simultaneity. On the ground the carriage has the length L=L0/γ. The two arrival times are c+vL/2 and c−vL/2. Their difference simplifies to
Δt=c2γL0v
For a carriage of 30m at 0.6c, Δt=1.25×30m×0.6/(3.00×108m/s)=75ns.
Leading clocks lag. Set two clocks at the ends of the carriage to the same time, in the carriage. On the ground, at one instant of ground time, the front clock reads less than the rear clock by L0v/c2. For our carriage that is 60ns. This is why each observer can find the other's clocks slow without a contradiction. They disagree about which readings happen together.
A famous puzzle
A pole moves through a barn. In the barn's frame the moving pole is short, and it fits inside with both doors shut. In the pole's frame the barn is short, and the pole cannot fit. Both are right. "Both doors shut at the same time" is a statement about simultaneity, and the pole's frame disagrees with it. You will work the numbers in a problem of this course.
Set the speed to 0.5c. By how many per cent is the rod shorter? Now try 0.99c.
Practise with new numbers
Try it in Python
The program takes a ship of proper length 100m past a beacon at four speeds. It prints the length in the beacon's frame, and the time the ship takes to pass the beacon on the beacon's own clock.
Common mistakes
Contracting the wrong length. The proper length belongs to the frame where the body is at rest. It is the longest.
Shrinking widths. Only the length along the motion contracts.
Measuring the ends at different times. A length is measured with both ends marked at once, in the observer's frame.
Thinking simultaneity is absolute. Events at the same time in one frame need not be at the same time in another.
Mixing up γL0v/c2 and L0v/c2. The first is the time between two events on the ground. The second is the difference of two clock readings.
Remember these
Length contraction: L=L0/γ, along the motion only.
Proper length: measured at rest. It is the longest.
Simultaneity depends on the frame.
In the train: Δt=γL0v/c2 between the two arrivals on the ground.
Leading clocks lag by L0v/c2.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A metre stick moves along its length at 0.6c. How long is it in your frame?
The same stick moves at 0.6c at right angles to its length. How long is it?
In the train with the lamp, which wall does the light reach first in the ground frame?
The muon's frame and the Earth's frame tell different stories. Do they agree on whether the muon reaches the ground?
References
OpenStax University Physics Volume 3, Chapter 5 Relativity, sections on the relativity of simultaneity and on length contraction.
Taylor and Wheeler, Spacetime Physics (second edition, 1992), on simultaneity and on the pole and barn puzzle.
Enroll free in Time Dilation and Length Contraction
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.