In a decay or a collision, total energy and total momentum are conserved. A particle at rest that decays into two shares the energy in a fixed way. Making a new particle on a target at rest needs a threshold energy, much larger than its rest energy. The same rules give Compton scattering.
about 35 min1 simulation3 practice questions
Lesson 3 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Two rules for every process
In any decay or collision, two things are conserved:
the total energy, rest energies included;
the total momentum, as a vector.
The invariant mass of the whole system, (Etot2−(ptotc)2)1/2/c2, is therefore the same before and after. We use these with E2=(pc)2+(mc2)2 for each particle.
A decay at rest
A particle of mass M at rest decays into two particles of masses m1 and m2. Momentum is zero before, so the two products fly apart with equal and opposite momenta p. Energy gives E1+E2=Mc2. Solving the two rules together,
E1=2MM2+m12−m22c2
and the same with 1 and 2 swapped. Every decay of this kind gives product 1 the same energy. That is why a two-body decay shows a sharp line in a spectrum.
Worked example: a pion decays. A positive pion (139.6MeV) at rest decays into a muon (105.7MeV) and a neutrino (nearly massless).
The muon's energy.Eμ=2×139.6139.62+105.72−0MeV=109.8MeV.
Its kinetic energy.Kμ=109.8MeV−105.7MeV=4.1MeV.
The momentum.pc=109.82−105.72MeV=29.8MeV.
The neutrino.Eν=pc=29.8MeV. Check: 109.8MeV+29.8MeV=139.6MeV.
Two drawings of a decay, side by side. On the left, before, a pion sits at rest as a single circle labelled pi plus, rest energy 139.6 MeV. On the right, after, from the small grey dot where the pion was, a muon labelled mu plus moves to the right and a neutrino labelled nu moves to the left, each with an arrow of the same length labelled momentum 29.8 MeV over c. Below the muon is written energy 109.8 MeV and kinetic energy 4.1 MeV. Below the neutrino is written energy 29.8 MeV.
A neutral pion at rest decays into two photons. Each has half the rest energy, 67.5MeV, and they fly apart back to back.
Thresholds: making new particles
To make new particles, kinetic energy must turn into rest energy. Let a beam particle of mass m1 hit a target of mass m2 at rest, and make products with total mass Σm. The products cannot all be left at rest, because the beam brings momentum. The least energy is reached when the products move off together, at rest in the frame of zero momentum. Using the invariant mass, the threshold kinetic energy is, with every mass written as its rest energy in MeV,
Kth=2m2(Σm)2−(m1+m2)2
Worked example: the antiproton. In p+p→p+p+p+pˉ, Σm=4mp and m1=m2=mp. So
Kth=216−4mpc2
Kth=6mpc2
Kth=5.63GeV
Only 2mpc2 of new rest energy is made, but the beam needs three times that. The Bevatron at Berkeley was built to pass this threshold, and the antiproton was found there in 1955.
Colliding beams. If two equal beams meet head on, the total momentum is zero. All the energy can become rest energy. Then each proton needs only mpc2=938.3MeV of kinetic energy to make the pair. This is why modern machines collide beams.
Compton scattering
A photon of wavelength λ hits a free electron at rest and is scattered through an angle θ, with the new wavelength λ′. Conserve energy and both parts of the momentum, and use E=pc for the photon and E2=(pc)2+(mec2)2 for the electron. The shift Δλ=λ′−λ is
Δλ=mech(1−cosθ)
with h/mec=2.426pm. The shift does not depend on λ. It matters for X-rays and gamma rays, where λ is only a few pm.
A photon cannot make a pair in empty space. A single photon has zero invariant mass, while an electron and a positron together have at least 2mec2=1.022MeV. So γ→e−+e+ is impossible alone. Near a nucleus it happens, because the nucleus takes some momentum.
The default is a neutral kaon (497.6MeV) decaying into two charged pions. Read the momentum. Now set product 2 to 0, a massless particle. Which product takes more kinetic energy?
Practise with new numbers
Try it in Python
The program finds the threshold kinetic energy for three reactions on a fixed target. Then it finds the energy each beam needs in a head-on collider.
Common mistakes
Taking the threshold as the new rest energy. On a fixed target the products must keep moving, so more energy is needed.
Forgetting the rest energies in the energy balance. Total energy includes mc2 of every particle.
Adding momenta as numbers. In two dimensions, conserve each part separately.
Giving the two products of a decay the same speed. They have equal momenta, not equal speeds, unless their masses are equal.
Using Compton's formula with the wavelength. The shift Δλ does not depend on the incident wavelength.
Remember these
Conserve total energy and total momentum, in every frame.
Decay at rest: E1=2MM2+m12−m22c2.
Threshold on a fixed target: Kth=2m2(Σm)2−(m1+m2)2c2.
Antiproton: Kth=6mpc2.
Compton: Δλ=mech(1−cosθ).
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A neutral pion at rest decays into two photons. Why must they move in opposite directions?
In the pion decay of the lesson, which product has more kinetic energy, the muon or the neutrino?
What is the Compton shift at θ=90∘?
Why do modern accelerators collide two beams head on?
References
OpenStax University Physics Volume 3, Chapter 5 Relativity, section on relativistic energy, and Chapter 6 Photons and Matter Waves, on the Compton effect.
Taylor and Wheeler, Spacetime Physics (second edition, 1992), on collisions, decays and thresholds.
Enroll free in Relativistic Energy, Momentum, Collisions and Decays
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.