The luminosity L of a star is the power it gives out. At a distance d the power spreads over a sphere, so the flux is F=L/(4πd2)
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
A lamp in a dark street
On a dark street a street lamp nearby looks bright, and the same lamp at the far end looks faint. The lamp gives out the same power. What changes is how much of it reaches your eye. Stars work in the same way.
Luminosity and flux
The luminosityL of a star is the total power it radiates, in watts. The Sun's luminosity is L⊙=3.83×1026W. The symbol ⊙ means the Sun.
At a distance d, that power spreads evenly over a sphere of area 4πd2. The power per square metre is the fluxF:
F=4πd2L
Its unit is W/m2. Cambridge A-Level calls it the radiant flux intensity. IB calls it the apparent brightness and writes b. All three names mean the same thing. This is the inverse-square law: at twice the distance, the flux is a quarter.
Worked example: the Sun's luminosity from a solar panel
Above the air, the Sun's flux at the Earth is the solar constant, 1361W/m2. The Earth is 1AU from the Sun. We want L, so L=4πd2F.
L=4π(1.496×1011m)2
×1361W/m2
L=3.83×1026W
A light meter on a satellite and a known distance give the power of the whole Sun.
Distance from brightness
If we know the luminosity of a star, a measured flux gives its distance:
d=4πFL
An object of known luminosity is called a standard candle. Standard candles are how we reach other galaxies, in the third course.
The magnitude scale
About 2100 years ago, Hipparchus sorted the stars by eye into six classes. The brightest were "first magnitude", the faintest "sixth magnitude". The eye responds to ratios of brightness, not differences. So the modern scale is a logarithmic one:
m1−m2=−2.5log10F2F1
Here m is the apparent magnitude. Two facts follow.
A larger magnitude means a fainter star. Very bright objects have negative magnitudes.
A difference of 5 magnitudes is a factor of exactly 100 in flux. One magnitude is a factor of 1001/5=2.512.
A number line of apparent magnitudes from minus 27 on the left to plus 30 on the right, with brighter objects to the left. Marked on it are the Sun at minus 26.7, the full Moon at minus 12.7, Venus at its brightest at minus 4.6, Sirius at minus 1.5, the faintest stars seen by eye on a dark night at about plus 6, and the faintest objects in deep telescope images at about plus 30. Under the line, a bracket shows that a step of 5 magnitudes is a factor of 100 in brightness.
Absolute magnitude and the distance modulus
The apparent magnitude depends on distance. To compare stars fairly, we imagine each one at 10pc. The absolute magnitudeM is the apparent magnitude a star would have at 10pc. The inverse-square law then gives the distance modulus:
m−M=5log1010pcd
A star nearer than 10pc has m smaller than M. The Sun has M=4.83, and at 1AU its apparent magnitude is −26.74. Dust between the stars dims starlight. We leave that out unless a question says otherwise.
Worked example: a star of 25L⊙ at 40pc
The flux.d=40×3.086×1016m=1.234×1018m. Then F=L/(4πd2)=5.00×10−10W/m2.
The absolute magnitude. It is 2.5log1025=3.49 magnitudes brighter than the Sun's: M=4.83−3.49=1.34.
The apparent magnitude.m=M+5log10(40/10)=1.34+3.01=4.35.
Check. A star at 4.35 is easy to see by eye, as the limit is about 6.
Where this sits in your syllabus. Cambridge A-Level and IB use luminosity, flux and the inverse-square law. Magnitudes are not in either syllabus, but olympiads and astronomy books use them everywhere, so we teach both.
Keep the luminosity at 1 and move the star to 10pc. The apparent magnitude equals the absolute magnitude. Now move it to 100pc. By how many magnitudes does it fade?
Practise with new numbers
Try it in Python
The program takes a star of known luminosity to five distances. It prints the flux and the apparent magnitude at each one.
Common mistakes
Forgetting to square the distance.F=L/(4πd2), not L/(4πd).
Reading the magnitude scale the wrong way. A larger magnitude is a fainter star.
Thinking one magnitude is a factor of 10. It is a factor of 2.512. Five magnitudes are a factor of 100.
Mixing up m and M.M is the magnitude at 10pc, which measures luminosity.
Forgetting the 10pc. The distance modulus gives d/(10pc).
Remember these
Luminosity L: the total power of a star, in watts. L⊙=3.83×1026W.
Flux: F=L/(4πd2), in W/m2.
Magnitudes: m1−m2=−2.5log10(F1/F2).
5 magnitudes is a factor of 100 in flux.
Distance modulus: m−M=5log10(d/10pc).
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A star is moved to three times its distance. What happens to its flux?
Star A has magnitude 2 and star B has magnitude 7. Which is brighter, and by what factor?
A star has m=M. How far away is it?
Two stars have the same flux at the Earth. Star A is twice as far as star B. Compare their luminosities.
References
OpenStax Astronomy 2e, Chapter 17 Analyzing Starlight, on the brightness of stars and magnitudes.
OpenStax University Physics Volume 2, Chapter 16, on the intensity of electromagnetic waves.
Enroll free in Measuring Stars: Distance, Luminosity and Temperature
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.