Vectors let us describe shapes and movement with algebra. You use position vectors to find midpoints and points that divide a line in a ratio. You show that points lie on one line and prove facts about triangles and parallelograms. You use velocity vectors to find positions, resultants and collisions.
about 25 min1 simulation1 practice question
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
This lesson is Additional Mathematics, unit 13 of Cambridge IGCSE Additional Mathematics 0606, outcomes 13.3 and 13.4. In the examination, a diagram is given for the harder vector geometry questions.
Position vectors and ratios
Let A and B have position vectors a and b.
The vector between them:AB=b−a.
The midpoint M of AB: go to A, then half way along AB. OM=a+21(b−a)=21(a+b).
A point P with AP:PB=m:n: it is m+nm of the way from A to B. So OP=a+m+nm(b−a)=m+nna+mb.
Example.A(1,2) and B(7,8), and AP:PB=1:2. Then OP=32a+1b=31(129)=(43). The point P is (3,4), one third of the way from A to B.
Collinear points and parallel lines
Three points are collinear when they lie on one straight line. Show that AB is a multiple of BC. Because the two vectors share the point B, the points must be on one line.
Example.A(1,2), B(4,5) and C(10,11). Then AB=(33) and BC=(66)=2AB. So A, B and C are collinear, and BC is twice as long as AB.
If AB=kCD but the points are not on one line, then the lines AB and CD are parallel, and AB is ∣k∣ times as long as CD.
Vector geometry with letters
In a shape the vectors may have no numbers, only letters. You write each vector as a journey along the sides.
A triangle OAB with O at the bottom left, A at the bottom right and B at the top. The vector a runs along OA and the vector b runs along OB. M is the midpoint of AB and N is the midpoint of OB. A dashed line joins N to M and is parallel to OA.
In the triangle OAB, let OA=a and OB=b. The point M is the midpoint of AB and N is the midpoint of OB. Then:
OM=21(a+b).
ON=21b.
MN=ON−OM=21b−21a−21b=−21a.
So MN is parallel to OA and half as long. This is the midpoint theorem, proved with vectors.
A parallelogram. In OABC with OA=a and OC=c, the opposite side AB equals c. So OB=a+c and AC=c−a.
Velocity and position
A velocity is a vector: its magnitude is the speed, and its direction is the direction of travel. In this unit i points east and j points north.
A ship leaves the origin with velocity (86)km/h. Its speed is 36+64=10km/h. After 2.5 hours it is at 2.5×(86)=(2015). In general
r=r0+tv,
where r0 is the starting position, v the velocity and t the time.
A bearing. A bearing is the angle clockwise from north. For (86), the east part is 6 and the north part is 8, so tanθ=86 and the bearing is 36.9∘.
Resolving a velocity. A plane flies at 100km/h on a bearing of 060∘. The east part is 100sin60∘=86.6km/h and the north part is 100cos60∘=50km/h.
Composing velocities. A boat has velocity (43)m/s in still water, and a river current has velocity (−21)m/s. The resultant velocity is the sum, (24). The speed over the ground is 20=4.47m/s.
Particles that meet
Particle P starts at (1,2) with velocity (13). Particle Q starts at (16,−4) with velocity (3−2). After t seconds the positions are
p=(2+t1+3t),q=(−4+3t16−2t).
They collide when the positions are equal at the same time. The x parts give 1+3t=16−2t, so t=3. The y parts give 2+t=−4+3t, so t=3 again. The two times agree, so they collide at t=3, at the point (10,5).
If the two times disagree, the paths cross but the particles are not there together.
Practise with new numbers
Try it in Python
The program prints the position of each particle and the distance between them second by second. It then finds the meeting time from the x parts and checks it with the y parts.
Common mistakes
Mixing up the order.AB=b−a, not a−b.
Swapping the ratio parts. For AP:PB=m:n the weight m goes with b.
Equal times from one equation only. A collision needs the same t from the x parts and the y parts.
Mixing speed and velocity. The speed is a number. The velocity is a vector.
Remember these
OM=21(a+b) for a midpoint, and OP=m+nna+mb for AP:PB=m:n.
Show that points are collinear by showing that AB is a multiple of BC.
Position after time t is r=r0+tv.
Particles collide when both parts of the position agree at the same t.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A is (2,−1) and B is (8,5). Find the position vector of the midpoint of AB.
Show that A(0,1), B(2,4) and C(6,10) are collinear.
In triangle OAB with OA=a and OB=b, P is the midpoint of OA and Q is the midpoint of OB. Find PQ.
A boat's velocity in still water is (52)m/s and the current is (−13)m/s. Find the speed over the ground.
A particle starts at (4,1) with velocity (3−2). Where is it after 4 seconds?
References
Cambridge International, IGCSE Additional Mathematics 0606 syllabus (2025, 2026 and 2027), unit 13, outcomes 13.3 and 13.4.
Enroll free in Vectors in Two Dimensions and Trigonometric Graphs
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.