A curve drawn by a parameter · Mathematics Class 11–12 | StemPy Lab
Course 14.1·Lesson 1 of 3
A curve drawn by a parameter
A parametric curve gives x and y as two formulas in a third variable, the parameter t. As
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
What you will be able to do
draw a curve from x(t) and y(t) with a table, and say which way the point moves;
remove the parameter, and say which part of the curve is really drawn;
write the parametric equations of a line, a circle, an ellipse and a cycloid.
A thrown ball
A ball leaves your hand. We use a simple model in which gravity is taken as 10m/s2. After t seconds the ball has travelled x=6t metres along the ground and is y=8t−5t2 metres high. Two formulas, one for each direction, and the time t joins them.
t (s)
x (m)
y (m)
0
0
0
0.4
2.4
2.4
0.8
4.8
3.2
1.2
7.2
2.4
1.6
9.6
0
Plot the five points and join them in the order of t. You get an arch. The ball rises until t=0.8s and lands at t=1.6s.
Two graphs side by side. On the left, the arch of a thrown ball: five dots at t = 0, 0.4, 0.8, 1.2 and 1.6 seconds joined by a smooth curve, starting at the origin, rising to a top of 3.2 metres at x = 4.8 metres and landing at x = 9.6 metres. On the right, an ellipse with half-width 3 and half-height 2 and four dots marked t = 0 at (3, 0), t = pi/2 at (0, 2), t = pi at (-3, 0) and t = 3 pi/2 at (0, -2), with arrows showing counterclockwise motion.
What a parameter is
A parametric curve is a pair of equations
x=f(t),y=g(t),a≤t≤b.
The letter t is the parameter. It is often time, but it can be an angle, or a length, or nothing physical at all. Each value of t gives one point. As t increases, the point moves along the curve. So a parametric curve has a direction, which an ordinary graph y=f(x) does not have.
Why do we need this? A circle cannot be written as one function y=f(x), because a vertical line crosses it twice. But two simple formulas describe it, as you will see below. Also, the same path can be followed fast or slowly, once or many times, and only the parameter tells us which.
Removing the parameter
Sometimes we want the equation in x and y alone. This is called eliminating the parameter. There are two usual ways.
Solve and substitute. For the ball, t=6x. Put this into y:
y=8⋅6x−5(6x)2=34x−365x2.
This is a parabola. Check with x=4.8: y=6.4−3.2=3.2, which matches the table.
Use an identity. For x=3cost and y=2sint, write cost=3x and sint=2y. Since cos2t+sin2t=1,
9x2+4y2=1.
This is an ellipse. The point starts at (3,0) when t=0, and moves counterclockwise. It returns to the start when t=2π.
Take care: which part is drawn?
The equation you get after eliminating t may include points that the parametric curve never reaches.
For x=t2 and y=t+1 with 0≤t≤3, we find t=y−1 and x=(y−1)2. This is a whole parabola. The point only travels along the half with y≥1, from (0,1) to (9,4).
For x=cost and y=cos2t we get y=x2. But x stays between −1 and 1, and the point goes from (1,1) to (−1,1) and back again. The same piece is traced twice in one turn of t.
So after eliminating t, always ask two questions. What values can x and y take? And in which order are the points reached?
Direction and speed
Compare three descriptions of a circle of radius 3.
x=3cost,y=3sint: counterclockwise, one lap for 0≤t≤2π.
x=3cos2t,y=3sin2t: the same circle, counterclockwise, but twice as fast, so one lap needs only 0≤t≤π.
x=3cost,y=−3sint: the same circle, clockwise.
The path is the same. The motion is not. That is why a parametric curve says more than its Cartesian equation.
Standard parametric forms
A straight line through (x0,y0) with direction (a,b): x=x0+at,y=y0+bt. The slope is ab.
A circle with centre (h,k) and radius r: x=h+rcost,y=k+rsint.
An ellipse with centre (h,k): x=h+acost,y=k+bsint.
The graph of y=f(x):x=t,y=f(t).
A cycloid. A wheel of radius r rolls along the x-axis without slipping. A point on its rim traces x=r(t−sint),y=r(1−cost), where t is the angle in radians through which the wheel has turned.
One arch of a cycloid above the x-axis. A wheel of radius r is drawn in three places: at the start with the marked rim point on the ground, half way with the point at the top at height 2r, and at the end with the point back on the ground after the wheel has moved 2 pi r. The arch is drawn in blue with the labels height 2r and length 2 pi r.
For the ellipse, the parameter t is not the angle that the line from the origin to the point makes with the x-axis. That angle has tanθ=abtant. The two agree only for a circle.
Practise with new numbers
Try it in Python
The first part of the program tabulates the ellipse x=3cost,y=2sint and tests the equation 9x2+4y2=1 at every point. The second part shows a curve that is traced back and forth.
Common mistakes
Forgetting the range of t. The equation in x and y can show more than the curve. Write the range of x and y next to it.
Mixing up the direction. Put in two or three values of t and see where the point goes. Do not guess.
Thinking that t is the angle of the point. For an ellipse it is not. For a circle it is.
Believing that one equation in x and y means one parametrisation. Many pairs of formulas draw the same path.
Remember these
A parametric curve is x=f(t),y=g(t). Increasing t moves the point, so the curve has a direction.
To eliminate t, solve for t and substitute, or use an identity such as cos2t+sin2t=1.
Always check which part of the Cartesian curve is really drawn, and whether it is traced more than once.
A line, a circle, an ellipse and a cycloid have standard parametric forms.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Eliminate t from x=2t−1,y=4t+3.
A point has x=5cost,y=5sint for 0≤t≤π. Describe its path.
Write the curve x=t+2,y=t2−1 as y in terms of x.
Find the point of x=4cost,y=2sint at t=3π.
A wheel of radius 2m rolls along the ground. Where is a point on the rim after the wheel has turned through π radians?