Robotics is the branch of computer science that designs, builds and operates robots. This lesson meets the three kinds of robot the syllabus names: factory equipment, domestic robots and drones. It then shows how a program moves a robot arm to the right place.
about 25 min1 simulation1 practice question
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Machines that work by themselves
A car body moves along a factory line. A robot arm swings round, welds a seam, and swings back for the next body. It does this hundreds of times a day, with nobody guiding it. At home, a small round robot vacuums the floor and finds its way round the chairs. Over a field, a drone flies up and down in neat lines, taking photographs of the crops.
These machines are all robots. The study of them is robotics.
What robotics is
Robotics is a branch of computer science that incorporates the design, construction and operation of robots.
Design is planning what the robot must do and what parts it needs.
Construction is building it: the frame, the motors, the sensors and the circuits.
Operation is programming and running it, so that it does its job.
So robotics brings together engineering and computing. The computer science part is the program that takes in data from sensors, makes decisions, and controls the actuators. That is the same sense, decide and act that you met in automated systems.
Three examples from the syllabus
Factory equipment. Robot arms weld, paint, assemble and pack. Robots also move heavy goods around warehouses.
Domestic robots. In the home, robots vacuum floors, mow lawns and clean windows.
Drones. A drone is a flying robot. Its program can fly a stored route, hold it steady in the wind, and land it. Drones survey crops, inspect bridges and deliver parcels.
A robot arm and its program
A labelled drawing of a two-joint robot arm on a fixed base. The base and the two arm parts form the mechanical structure. A motor at the shoulder and a motor at the elbow are the actuators. A sensor at each joint measures its angle. A gripper is at the end. A box labelled microprocessor and program is wired to the motors and sensors.
A factory arm has joints, and each joint is turned by a motor. The motors are the actuators. To put the gripper in the right place, the program works out the angle for each motor. Sensors in each joint tell the microprocessor how far the joint has turned, so it can stop the motor at the right angle.
Practise with new numbers
Try it in Python
The program works out where the gripper of a two-joint arm ends up for four pairs of angles. The upper part of the arm is 1.0m long and the lower part is 0.8m long.
Common mistakes
Robotics is only building robots. It is the design, construction and operation of robots.
Every machine is a robot. A robot has particular characteristics, which the next lesson lists.
Drones are not robots. A drone is one of the syllabus examples of robotics.
Robots look like people. Most robots look nothing like a person. A robot arm or a drone is still a robot.
Remember these
Robotics: the branch of computer science that incorporates the design, construction and operation of robots.
Examples: factory equipment, domestic robots and drones.
A robot uses sensors, a microprocessor and actuators, controlled by a program.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Complete the definition: robotics is a branch of computer science that incorporates the ... of robots.
Give one example of a domestic robot and say what it does.
Give two jobs that a drone can do.
In a robot arm, what are the actuators, and what do they do?
A drone flies a route of 1350m at 9m/s. How long does the route take?
Enroll free in Robotics: Characteristics, Roles and Uses
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.