Poly(ethene) is only the first of a family. Change one atom of the monomer and you get a different plastic. You learn to draw the repeat unit of an addition polymer from its monomer, and to find the monomer from a repeat unit.
about 30 min1 simulation2 practice questions
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
The repeat unit
A polymer chain is made of the same small group repeated again and again. This group is the repeat unit. For poly(ethene) it is −CH2−CH2−. The bonds at the two ends are drawn open because they join to the next unit.
From an alkene to an addition polymer
This rule works for every addition polymer made from one alkene.
Draw the monomer with its C=C double bond.
Change the double bond to a single bond. Draw an open bond at each end of the two carbon atoms.
Keep every other atom or group exactly where it was, above or below the two carbon atoms.
Put brackets round the unit, and write n after them.
Chloroethene, CH2=CHCl, gives poly(chloroethene), also called PVC, (−CH2−CHCl−)n.
Tetrafluoroethene, CF2=CF2, gives poly(tetrafluoroethene), also called PTFE, (−CF2−CF2−)n.
Four addition polymers in four rows, each with its monomer on the left, an arrow, and its repeat unit in brackets on the right. Ethene gives poly(ethene), with four hydrogen atoms on the two carbon atoms. Propene gives poly(propene), with one methyl group in place of a hydrogen atom. Chloroethene gives poly(chloroethene), also called PVC, with one chlorine atom. Tetrafluoroethene gives poly(tetrafluoroethene), also called PTFE, with four fluorine atoms.
Poly(propene) is used for ropes and crates. PVC is used for pipes and the covering of electric cables. PTFE is the slippery coating of non-stick pans.
Notice that the repeat unit has the same atoms as the monomer. Only the double bond has changed to a single bond.
From a repeat unit back to the monomer
The same rule works backwards.
Look at the two carbon atoms in the chain.
Remove the open bonds at the ends, and put a double bond between the two carbon atoms.
Keep the other atoms and groups.
For example, −CF2−CF2− gives CF2=CF2. And the unit −CH2−CHCl− gives CH2=CHCl.
A trap is a drawing that shows more than one unit. If you see −CH2−CH(CH3)−CH2−CH(CH3)−, the chain has four carbon atoms in the part drawn, but the repeat unit is still two. The monomer is propene.
What makes it an addition polymer?
You can tell an addition polymer by these features.
The monomer has a carbon-carbon double bond.
The monomers simply add to one another.
There is only one product, the polymer.
The polymer has the same atoms as the monomers, so the relative formula mass of a chain is n×Mr of the monomer.
In the next lesson you see a second way to make polymers that is different on all of these points.
You should find that a heavier group X gives a heavier repeat unit and a larger share of the chain's mass. For the value 35.5 the group is chlorine, and more than half of the mass of PVC is chlorine.
Practise with new numbers
Try it in Python
This program works out the relative formula mass of the repeat unit for four monomers from the masses of the groups.
Common mistakes
Keeping the double bond in the repeat unit. The repeat unit has a single bond.
Moving a side group. Chlorine, fluorine and the methyl group stay on their carbon atom.
Counting the open bonds as atoms. They are only the bonds to the next unit.
Forgetting that the monomer of PVC is chloroethene. It is not chloroethane, which has no double bond.
Remember these
Repeat unit: take the two carbon atoms of C=C, make the bond single, open the ends.
Ethene, propene, chloroethene and tetrafluoroethene give poly(ethene), poly(propene), PVC and PTFE.
Addition polymerisation: C=C monomers, one product only.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Draw the repeat unit of poly(propene) in the form with a methyl group.
Name the monomer that makes PVC.
The repeat unit of a polymer is −CF2−CF2−. What is the monomer?
A chain of PVC has 1000 repeat units. How many carbon atoms does the backbone have?
Give two features of the addition polymerisation of an alkene.