Ethanol: how it is made and what it is used for ·… | StemPy Lab
Course 11.3·Lesson 1 of 3
Ethanol: how it is made and what it is used for
Hand gel, perfume and the fuel in some cars all contain ethanol. There are two ways to make it, and they are very different. You learn both, compare them, and see ethanol burn.
about 30 min1 simulation2 practice questions
Lesson 1 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Alcohols and ethanol
The alcohols are a homologous series with the hydroxyl group, -OH, as the functional group. The general formula is CnH2n+1OH. Ethanol, CH3CH2OH, is the alcohol that you meet most. It is a colourless liquid that mixes with water.
There are two ways to make it: fermentation and the addition of steam to ethene.
Making ethanol by fermentation
Fermentation uses yeast, which is a living organism, and a solution of glucose in water. Yeast contains enzymes. An enzyme is a biological catalyst. Here are the conditions.
aqueous glucose and yeast,
a temperature of 25 to 35 °C,
no oxygen, which is called anaerobic.
C6H12O6→2C2H5OH+2CO2
A fermentation apparatus. A conical flask stands in a warm water bath at 30 degrees Celsius and holds a mixture of glucose solution and yeast. A bung closes the flask. A delivery tube from the bung bends over and dips into a test tube of limewater, which has turned milky. Bubbles of carbon dioxide rise through the limewater. A label says no air gets into the flask.
The temperature is gentle. Below 25∘C the yeast works too slowly. Above 35∘C the enzymes are damaged and stop working. If air got in, the ethanol would be oxidised to ethanoic acid, and the yeast would turn the glucose into carbon dioxide and water. This is why the vessel is closed with an air lock.
Carbon dioxide is a product. It turns limewater milky, which shows that fermentation is working.
The mixture that comes out has only a small amount of ethanol in water, because the yeast stops when the ethanol is too strong. The ethanol is separated and made stronger by fractional distillation. Ethanol boils at 78∘C and water at 100∘C.
Making ethanol from ethene
In the last course you met the other way. Ethene and steam are passed over an acid catalyst at 300∘C and 6000kPa, which is 60 atmospheres.
CH2=CH2+H2Oacid catalystCH3CH2OH
The reaction is reversible, and only a small part of the ethene turns into ethanol in one pass. The ethene that is left is passed through again.
Two routes to ethanol, side by side. Left route, fermentation: glucose solution with yeast, 25 to 35 degrees Celsius, no oxygen, gives a dilute solution of ethanol, and then fractional distillation gives ethanol. Right route, steam: ethene and steam, 300 degrees Celsius, 6000 kilopascals, acid catalyst, give ethanol. A label under each route names it: fermentation is slow and uses a renewable raw material, and the steam route is fast and uses ethene from crude oil.
Extended: comparing the two ways
You must be able to give the advantages and the disadvantages of each way.
Raw material: fermentation uses sugar from plants, a renewable resource. The steam method uses ethene from crude oil, which is not renewable.
Speed: fermentation is slow and takes days. The steam method is fast.
Process: fermentation is a batch process, one batch at a time. The steam method is continuous.
Product: fermentation gives a dilute solution that needs distillation. The steam method gives pure ethanol.
Conditions: fermentation needs a low temperature and cheap equipment. The steam method needs 300∘C and 6000kPa, which is costly.
Each way has advantages and disadvantages. Fermentation uses a renewable resource and a low energy cost, but it is slow and the product needs more purifying. The steam method is fast and makes pure ethanol, but it uses crude oil, which will run out, and needs a lot of energy.
Burning ethanol and what it is used for
Ethanol burns with a clean flame and gives out a lot of energy.
C2H5OH+3O2→2CO2+3H2O
It has two main uses.
A fuel, on its own in a spirit burner and mixed with petrol.
A solvent, for perfumes, paints, inks, medicines and hand gel. Many substances that do not dissolve in water dissolve in ethanol.
You should find that the carbon dioxide has about half of the mass of the glucose, and the ethanol about half. Raising the yield only makes both larger.
Practise with new numbers
Try it in Python
This program works out the amount of glucose, the ethanol that could form, the ethanol that is made, and the carbon dioxide.
Common mistakes
Leaving out the 2 in the fermentation equation. One mole of glucose makes two moles of ethanol and two moles of carbon dioxide.
Saying that fermentation needs oxygen. It must have none.
Saying that the temperature must be as high as possible. Above 35∘C the enzymes of the yeast are damaged.
Forgetting that fermentation makes a dilute solution. It needs distillation to make it stronger.
Remember these
Fermentation: aqueous glucose and yeast, 25 to 35 °C, no oxygen. C6H12O6→2C2H5OH+2CO2.
Steam and ethene: 300 °C, 6000 kPa, acid catalyst. The reaction is reversible.
Fermentation is slow, uses a renewable resource and needs distillation. The steam method is fast and continuous, and uses crude oil.
Ethanol burns, and is used as a fuel and as a solvent.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Give the three conditions for the manufacture of ethanol by fermentation.
How can you show that carbon dioxide is given off in fermentation?
Why is the vessel for fermentation kept closed and free of oxygen?
Give one advantage of making ethanol by fermentation compared with the steam and ethene method.
Write the balanced equation for the complete combustion of ethanol.