Hydrogen forms a compound with almost every element. We sort these hydrides into three types by the bond they hold. Then we look at the most important hydride of all, water: why some water is hard, how it is softened, and what makes heavy water different.
about 30 min1 simulation1 practice question
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Three kinds of hydride
A hydride is a compound of hydrogen with one other element. How the hydrogen is bonded depends on the other element. So the hydrides fall into three types, which follow the blocks of the periodic table.
A block outline of the periodic table, periods 1 to 6, coloured by the type of hydride each element forms. Groups 1 and 2 from lithium and sodium down, apart from beryllium and magnesium, are ionic hydrides (blue). Beryllium and magnesium are marked as polymeric hydrides with covalent character. Groups 13 to 17 are covalent or molecular hydrides (orange). Groups 3, 4 and 5, chromium, and nickel, palladium and platinum are metallic or interstitial hydrides (green). Groups 11 and 12 are marked intermediate (pale yellow). Groups 7, 8 and 9, with molybdenum and tungsten, are grey: no hydride forms, and the label says groups 7 to 9: the hydride gap. Noble gases are white.
Ionic or saline hydrides. The metals of group 1 and the heavier metals of group 2 (calcium, strontium, barium) give hydrogen an electron. The solid holds H− ions. These hydrides are white, crystalline and have high melting points. When melted and electrolysed, they give hydrogen at the anode, which shows that the hydrogen is the negative ion. They react with water at once:
NaH+H2O→NaOH+H2
Lithium hydride has a strong covalent part. Beryllium hydride and magnesium hydride are polymeric: they are chains or networks with covalent bridges, not simple ionic solids. Lithium hydride is used to make lithium aluminium hydride, a strong reductant in organic chemistry:
8LiH+Al2Cl6→2LiAlH4+6LiCl
Covalent or molecular hydrides. The p-block elements share electrons with hydrogen. We sort them by the electrons around the central atom.
Electron-deficient: too few electrons to write ordinary two-electron bonds for every link. Diborane, B2H6, is the example (group 13). They act as Lewis acids.
Electron-precise: exactly the electrons needed for the bonds, and no lone pair. CH4, SiH4 and GeH4 (group 14) are tetrahedral.
Electron-rich: lone pairs left over. NH3 has one, H2O has two and HF has three. They act as Lewis bases, and the small, electronegative N, O and F atoms give strong hydrogen bonds.
Metallic or interstitial hydrides. Many d-block and f-block metals take hydrogen atoms into the holes of their lattice. The lattice swells, but the metal keeps its shine and conducts. These hydrides are often non-stoichiometric: the ratio is not a whole number, as in TiH1.7 or PdH0.6. The metals of groups 7, 8 and 9 form no hydride at all. This stretch is called the hydride gap. Palladium and platinum take up a large volume of hydrogen. A thin palladium sheet lets only hydrogen through, which is a way to purify it and a way to store it.
Water
Water is a bent molecule, with a H-O-H angle of 104.5∘. It is polar, and each molecule can make up to four hydrogen bonds. This explains its high boiling point for such a small molecule.
In ice, each oxygen sits at the centre of a tetrahedron of four others, joined by hydrogen bonds. The open network holds a lot of empty space. So ice is less dense than liquid water and floats. When ice melts, part of the network collapses and the molecules come closer. Liquid water is densest at about 4∘C.
Water is amphoteric: it is an acid towards ammonia and a base towards hydrogen sulphide.
H2O+NH3⇌OH−+NH4+ and H2O+H2S⇌H3O++HS−
Hard water
Rain water dissolves carbon dioxide. Flowing over limestone, it picks up calcium and magnesium ions. Water with these ions is hard. Why does it matter? Soap is a sodium salt of a long-chain fatty acid. Calcium and magnesium ions turn it into an insoluble scum, and the soap is wasted.
2C17H35COONa+Ca2+→(C17H35COO)2Ca+2Na+
In boilers and kettles, hard water leaves a scale that wastes heat and can block pipes.
Temporary hardness comes from the hydrogencarbonates of calcium and magnesium. Boiling removes it:
Ca(HCO3)2→CaCO3+H2O+CO2
Mg(HCO3)2→Mg(OH)2+2CO2
Why does magnesium come out as the hydroxide and not the carbonate? Magnesium carbonate is much more soluble than magnesium hydroxide. So the hydroxide is the solid that separates.
Clark's method adds just enough slaked lime (calcium hydroxide) to turn the hydrogencarbonate into carbonate:
Ca(HCO3)2+Ca(OH)2→2CaCO3+2H2O
Mg(HCO3)2+2Ca(OH)2→2CaCO3+Mg(OH)2+2H2O
Notice that each magnesium hydrogencarbonate needs two calcium hydroxide.
Permanent hardness comes from the chlorides and sulphates. Boiling does not remove it. Four methods do.
Washing soda, Na2CO3⋅10H2O, precipitates the ions as carbonates: CaCl2+Na2CO3→CaCO3+2NaCl.
Calgon, sodium hexametaphosphate Na6P6O18, holds the ions in a soluble complex, so they no longer react with soap: Ca2++Na4P6O182−→[Na2CaP6O18]2−+2Na+.
Ion exchange with a zeolite (permutit), a hydrated sodium aluminium silicate written NaZ: 2NaZ+Ca2+→CaZ2+2Na+. When the zeolite is used up, it is washed with strong brine, and the reverse exchange restores it.
Synthetic resins. A cation exchange resin, RSO3H, swaps every cation for H+. An anion exchange resin swaps every anion for OH−. The H+ and OH− then join to give water. Water passed through both is deionised.
How hardness is measured. Hardness is written as the mass of calcium carbonate, in milligrams for each litre (ppm), that holds the same number of calcium and magnesium ions. Each Ca2+ or Mg2+ counts as one CaCO3, which is 100g/mol. In the laboratory, the ions are titrated with EDTA, which holds each metal ion in a one-to-one complex.
Set calcium to 40 mg/L and magnesium to 0. The hardness is 100 ppm. Now set calcium to 0 and magnesium to 24 mg/L. The hardness is again 100 ppm, because 24 mg of magnesium is the same number of ions as 40 mg of calcium.
Practise with new numbers
Heavy water
Heavy water is D2O, with deuterium in place of protium. When ordinary water is electrolysed for a long time, the lighter H2 is set free faster than D2. So the water left behind becomes richer in deuterium. Repeated electrolysis gives almost pure D2O. Modern plants use chemical exchange and distillation, which cost less energy.
Heavy water is a little different from ordinary water. Its molar mass is 20g/mol. It melts at 276.8 K and boils at 374.4 K. Its density at 298 K is 1.106g/cm3. Reactions are slower in it, because of the isotope effect.
Uses. It is a moderator in some nuclear reactors: it slows neutrons down without taking many of them in. It is also used to study reaction mechanisms and to make deuterated compounds.