Polymerisation as a synthetic step: monomers, repeat units and chain length
A nylon rope and a plastic bottle are each one huge molecule built from small ones. Making them is the last step of a synthesis, and making their monomers comes before it. This lesson treats polymerisation as a planned step: choosing the monomer, making it, finding it from the repeat unit, and controlling how long the chains grow.
about 25 min1 simulation1 practice question
Lesson 3 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Two ways to build a chain
Addition polymers form from monomers with a C=C bond. The double bonds open and join into a chain, and nothing is lost. The repeat unit has the same atoms as the monomer.
Ethene gives poly(ethene). At high pressure with a radical initiator it forms branched low-density poly(ethene) (LDPE). With a Ziegler-Natta catalyst it forms linear high-density poly(ethene) (HDPE).
The free-radical chain reaction has three stages: initiation (a peroxide gives radicals), propagation (a radical adds to a monomer and makes a new radical), and termination (two radicals meet).
Condensation polymers form from monomers with two functional groups each. Every new link releases a small molecule, such as water or hydrogen chloride.
Polyamides. Nylon-6,6 forms from hexane-1,6-diamine and hexanedioic acid, with water lost. With hexanedioyl dichloride instead of the acid, the reaction is fast at room temperature and HCl is lost. Nylon-6 forms by opening the ring of caprolactam. Kevlar forms from benzene-1,4-diamine and benzene-1,4-dicarbonyl dichloride.
Polyesters. PET (Terylene) forms from benzene-1,4-dicarboxylic acid and ethane-1,2-diol.
Biodegradable polyesters. Poly(lactic acid), PLA, forms from 2-hydroxypropanoic acid, which has both groups in one molecule. PHBV forms from 3-hydroxybutanoic and 3-hydroxypentanoic acids.
Cross-linked resins. Bakelite forms from phenol and methanal.
Making the monomers
A polymer is only as available as its monomers. Two classic syntheses show the idea.
Chloroethene for PVC. Ethene and chlorine give 1,2-dichloroethane. Strong heating removes HCl: ClCH2CH2Cl→CH2=CHCl+HCl.
Both monomers of nylon-6,6 from one compound. 1,4-Dibromobutane with potassium cyanide in ethanol gives hexanedinitrile, two carbons longer. Hydrolysis of one portion gives hexanedioic acid. Reduction of another portion gives hexane-1,6-diamine.
Making both monomers of nylon-6,6 from one compound. 1,4-Dibromobutane, Br(CH2)4Br, with two moles of KCN in ethanol under reflux gives hexanedinitrile, NC(CH2)4CN. Hydrolysis with H3O+ and heat gives hexanedioic acid, HOOC(CH2)4COOH. Reduction with hydrogen and nickel, or LiAlH4, gives hexane-1,6-diamine, H2N(CH2)6NH2. The two monomers heated together give nylon-6,6 and water.
From the repeat unit back to the monomers
An exam often shows a repeat unit and asks for the monomers. Work backwards, as in retrosynthesis.
Addition polymer: the repeat unit has two carbons in its main chain. Put a C=C between them.
Polyamide: break each C(=O)-NH link. Add OH to the C=O end (or Cl, for an acyl chloride) and H to the N end.
Polyester: break each C(=O)-O link. Add OH to the C=O end and H to the O end.
How long are the chains?
The degree of polymerisation is the number of repeat units in an average chain:
n=MrepeatMn
where Mn is the number-average molar mass of the sample. For poly(ethene) the repeat unit is CH2CH2, 28 g/mol.
For a condensation polymer the chain grows step by step. Let p be the fraction of the functional groups that have reacted. The Carothers equation gives the average number of monomer residues in a chain:
Xn=1−p1
At p=0.90 the chains hold only 10 residues: a sticky oil. A strong fibre needs p above 0.99. So the monomers must be very pure and mixed in exactly equal amounts. This equation is olympiad material; NCERT and A-Level do not ask for it.
Move p from 0.98 to 0.996. The chains grow five times longer, though only a little more of the groups have reacted.
Chirality in polymers
Lactic acid made in a laboratory from ethanal is racemic. Lactic acid made by fermentation of sugars is a single enantiomer. PLA from one enantiomer packs into crystals and is stronger than PLA from the racemate. Here the chiral pool helps the polymer chemist too.
Practise with new numbers
Try it in Python
The program lists the repeat-unit masses of five polymers and the number of repeat units in a chain of one molar mass.
Common mistakes
Writing the repeat unit of an addition polymer with a C=C. The double bond is used up.
Leaving out the small molecule. Each link of a condensation polymer releases water or HCl.
Breaking a polyamide at the wrong bond. Break C(=O)-N, not C-C.
Thinking 95 % reaction gives long chains. By the Carothers equation it gives only about 20 residues.
References
NCERT Chemistry Part II for Class 12 (2007 edition), Unit 15, Polymers.
OpenStax Chemistry 2e, Chapter 20, section 20.1, on addition polymers.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Name the two monomers of nylon-6,10, whose repeat unit is -NH(CH2)6NH-CO(CH2)8CO-.
What is the repeat unit of the addition polymer made from propenenitrile, CH2=CHCN?
By the Carothers equation, how many residues does an average chain hold at p=0.98?
Which monomer of nylon-6,6 does the reduction of hexanedinitrile give?
Enroll free in Chirality and Polymers in Synthesis
Every lesson is open to read. Enrolling also lets you:
Mark lessons done and carry on where you stopped.
Take the tests of this lesson and its course.
Count the course towards the certificate for its chapter.