A dietitian cannot see starch or protein in a food, but a few drops of the right liquid can show them. This lesson gives the five food tests of the syllabus, the exact colour of each positive result, and the steps that make a test fair and safe. It ends with a test that can even measure vitamin C.
about 25 min1 simulation1 practice question1 Python program5 questions to check yourself
This lesson is free to read. Enroll free to keep your place and take the tests.
Lesson 2 of 3Show all lessonsHide
Try the code and the simulations beside the lesson.
Testing a food
How can we tell what is in a food? We cannot see starch or protein, but we can use a reagent. A reagent is a chemical that gives a clear colour change with one kind of substance.
There are five tests that you must know. Each one has a reagent and a positive result.
A table of five food tests, each with two test tubes drawn side by side, before and after. Iodine solution for starch: yellow-brown before, blue-black for a positive result. Benedict's solution for reducing sugars, heated in a hot water bath: blue before, then green, yellow, orange and finally a brick-red positive result. Biuret test for protein: blue before, purple for a positive result. Ethanol emulsion test for fats and oils: a clear colourless liquid before, a cloudy white emulsion for a positive result. DCPIP for vitamin C: blue before, colourless for a positive result.
Test for
Reagent
Positive result
Starch
iodine solution
blue-black
Reducing sugar
Benedict's solution
orange-red or brick-red
Protein
biuret reagent
purple
Fat
ethanol, then water
cloudy white
Vitamin C
DCPIP
colourless
A negative result means that the colour stays the same as at the start.
The tests, step by step
Starch: iodine solution
Put a small piece of the food, or a few drops of a solution of it, on a white tile or in a test tube.
Add a few drops of iodine solution. It is yellow-brown.
If starch is present, the colour turns blue-black.
You do not need to heat this test.
Reducing sugars: Benedict's solution
If the food is solid, crush it with water, and use the liquid.
Add an equal volume of Benedict's solution. It is blue.
Heat the tube in a hot water bath for a few minutes.
If a reducing sugar is present, the colour changes. The order is blue, green, yellow, orange and then brick-red. The further the change, the more reducing sugar there is.
If there is no reducing sugar, the solution stays blue.
Protein: the biuret test
Add biuret reagent to the food solution. Some books add sodium hydroxide solution first, and then drops of dilute copper sulfate solution.
The blue mixture turns purple if protein is present. It stays blue if there is no protein.
Sodium hydroxide is corrosive, so wear eye protection.
Fats and oils: the ethanol emulsion test
Crush the food and shake it with ethanol. Fats and oils dissolve in ethanol.
Let the solid settle. Pour the clear ethanol into a tube of water.
If fat is present, a cloudy white emulsion forms. Tiny drops of fat spread through the water. If there is no fat, the water stays clear.
Ethanol catches fire easily, so keep it away from flames.
Vitamin C: DCPIP
Put a fixed volume of blue DCPIP solution in a tube.
Add the juice, drop by drop, and shake.
Vitamin C makes the blue colour disappear. The tube becomes colourless.
The fewer drops of juice that are needed, the more vitamin C the juice has.
Making a test fair
Use the same volume of reagent and of sample each time.
Do a test with water as well. It should give a negative result. This shows that the reagent itself is not changing colour.
Look at the colour at the end. Then compare it with the colours in the table.
Notice that the curve falls. A richer juice needs less juice to remove the blue. The volume needed is a measure of how much vitamin C there is.
Try it in Python
The program looks at the colours that were seen and lists the nutrients that the food contains.
Practise with new numbers
Common mistakes
Writing "it turns blue" for the iodine test. The result is blue-black, from yellow-brown.
Writing "it turns red" for Benedict's test without heating. The tube must be heated in a hot water bath.
Writing that a negative biuret result is clear. It stays blue.
Putting the food straight into water for the fat test. The food is mixed with ethanol first, and then the ethanol is poured into water.
Saying that DCPIP turns blue when vitamin C is present. It starts blue and becomes colourless.
Remember these
Starch: iodine solution, blue-black.
Reducing sugar: Benedict's solution, heat, blue to brick-red.
Protein: biuret, purple.
Fats and oils: ethanol then water, cloudy white emulsion.
Vitamin C: DCPIP, blue to colourless.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
A student adds iodine solution to a food, and the colour turns blue-black. What does the food contain?
Describe how to test a food solution for reducing sugars, and give a positive result.
What is the colour of the biuret mixture if the food contains protein, and if it does not?
In the test for fats, why is the food shaken with ethanol and not with water?
Juice A makes DCPIP colourless after 10 drops. Juice B needs 25 drops. Which juice has more vitamin C, and why?
References
Cambridge IGCSE Biology 0610 syllabus for 2026 to 2028, section 4.1, Biological molecules, point 3.